harbeck used for sale

Ref. -No.: 10257 Manufacturer: HEIDENREICH & HARBECK Year of construction: 1981 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPM Machine length: 2.900 mm Machine width: 1.200 mm Machine Height: 1.800 mm Weight Of The Machine Ca.: 3,5 t Tool holder type: Multifix Typ B Turning Length: 1.000 mm Turning Diameter Over Bed: 480 mm Turning Diameter Over Slide Rest: 295 mm Bezel diameter (inside): 1 x 145, 1 x 255 mm

Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t

Center height: 0 mm Center distance: 1000 mm Spindle bore: 55 mm SPECIFICATIONS Swing over bed Ø 520 mm Distance between centres 1000 mm Spindle bore  55 mm Spindle speeds / ranges  1120 Rpm

: . centre distance: 3000 mm max. swing diameter: 660 mm multifix: . steady: 2 Stück weight of the machine ca.: 5 t : KW 39/2022 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 540 mm turning diameter over slide rest: 270 mm turning length: 2500 mm spindle passage: 60 mm turning speeds: 600 U/min Rapid travel: steady for max. workpiece diameter from: 270 mm steady for max. workpiece diameter from: 170 mm faceplate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm turning length: 3000 mm centre height: 290 mm : coolant: : 80-1037-1031 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter above bed: 360 mm, Turning length: 550 mm, Center height: 180 mm, Speed range: 20 - 1050 rpm, Quill stroke: 150 mm, Lining: Ø 200 mm - 3 jaws FORKHARDT, Spindle passage: 50 mm, Space requirements (W x D x H): approx. 2.4 x 1.0 x 1.25 m, Machine Weight: 1800 kg, Total power: 5 kW,

Voltage: 380V, connected load: 5.5kW.

turning diameter over bed: 630 mm turning diameter over slide rest: 380 mm turning length: 400 mm spindle passage: 105 mm turning speeds: 24-1800 U/min Rapid travel: steady for max. workpiece diameter from: 340 mm 3 jaw chuck Forckrath: 315 mm throat: 700 mm length of gap: 300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 80131-0271 centre distance: 2000 mm centre height: 250 mm bore diameter: 63 mm with digital read-out: K+C Easson10L voltage: 380 V : 220 V ampere: 16 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 2000 mm swing diameter over bed slide: 520 mm total power requirement: 7,5 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 4745 mm x 1340 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Rotary Ø: 340 mm - Turning length: 1050 mm - Center height: 170 mm - Speed range: 20 - 2500 rpm - Quill stroke: 160 mm - Lining: Ø 250 mm - 4 -jaws - Spindle passage: 55 mm - Space requirements (W x D x H): approx. 3.1 x 1.1 x 1.5 m - Machine weight: 2,200 kg - Total power: 5.5 kW - Condition: good Accessories 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, bezel

Height of centres: 255 mm turning diameter over bed: 520 mm turning diameter over slide rest: 300 mm turning length: 1500 mm bed width: 400 mm spindle bore: 62 mm total power requirement: 7,5 kW turning speeds: 1400 U/min faceplate diameter: 500 mm weight of the machine ca.: ca. 2,85 t required space: 3,8 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter over bed: 640 mm turning diameter over slide rest: 390 mm spindle turning speed range: 4.5 - 1800 U/min spindle bore: 68,0 mm morse taper: 5 MK quill stroke: 220 mm bed width: 405 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 11 - 18 kW weight of the machine ca.: 2500 kg. dimensions of the machine ca.: 2950 x 1200 x 1500 mm from a maintenance workshop - good condition () Machine was checked annually Furnishing: - heavy - robust lead/pull spindle machine - WERNER GARANT face plate Ø 500 mm - HEIDENHAIN digital display - type ND 730 - MULTIFIX steel holder, with 3x inserts - FINN SAFETY lining protection - type SPS 600 - movable tailstock - Machine light - 1x food key - Chip back wall - movable bed stop - 2x EMERGENCY STOP switches - Coolant system, with collecting tray Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenbl ...

turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2000 U/min spindle bore: 56,0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7,75 kW weight of the machine ca.: 1950 kg. dimensions of the machine ca.: 2700 x 1200 x 1600 mm from a workshop for the disabled () Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

min/max. wheel diameter at ratio = 1:10: 25 / 600 mm gear width: 90 mm module max. spur toothing: 2 -9 Modul min/max. pitch cone angle: 5 - 90 ° weight of the machine ca.: 5,8 t Overall size: 3,8 x 2,3 x 1,6 mm max. ram stroke: 0 - 100 mm no. of strokes: 63 - 400 /min Stück total power requirement: 7,2 kW Machine condition very good compl. standard accessories with adjustment tools, change gears and measure tools video link: http://www.youtube.com/watch?v=oMI-DRWWDLA&feature=youtu.be The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 920 mm turning diameter over bed: 260 mm turning diameter over slide rest: 140 mm number of spindle speeds: 35.5 - 3150 U/min. turning speeds: 14 Stk. spindle bore: Ø 30.0 mm quill stroke: 100 mm bed width: 255 mm tailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / GR 5 feeds - longitudinal: 0.04 - 0.4 mm/U feeds - cross: 0.02 - 0.2 mm/U voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 1100 kg range L-W-H: 2140 x 850 x 1400 mm Machine from a vocational school (NL) Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RSF Z-520 2-axis digital display - RÖHM 3-jaw chuck Ø 200 mm, including chuck key - foldable lathe chuck protection - DREHBLITZ steel holder - TYPE DB 70 - with 2x inserts - robust, movable ...

turning length: 920 mm turning diameter over bed: 260 mm turning diameter over slide rest: 140 mm number of spindle speeds: 35.5 - 3150 U/min. turning speeds: 14 Stk. spindle bore: Ø 30.0 mm quill stroke: 100 mm bed width: 255 mm tailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / GR 5 feeds - longitudinal: 0.04 - 0.4 mm/U feeds - cross: 0.02 - 0.2 mm/U voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 1100 kg range L-W-H: 2140 x 850 x 1400 mm Machine from a vocational school (NL) Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RSF Z-520 2-axis digital display - RÖHM 3-jaw chuck Ø 200 mm, including chuck key - foldable lathe chuck protection - DREHBLITZ steel holder - TYPE DB 70 - with 2x inserts - robust, movable ...

L&Z Lathe Lathe Turning (Used) Manufacturer: VDF Heidenreich & Harbeck Model 21 R0 Turning diameter over bed 420 mm Turning diameter over support 270 mm Turning length 1100 mm Center height 210 mm Spindle bore 58 mm Speed range 19 - 2000 rpm Main motor 7.5 kW Bed width 330 mm Cone Quill MK 4 Quill stroke 160 mm Quill diameter 65 mm Machine weight approx. 2000 kg Length 3200 mm, width 1100 mm, height 1600 mm 3-jaw chuck 250 mm incl. jaws 4-jaw chuck 250 mm incl. jaws Steel bracket System Multifix incl. insert size B Chip pan Grain tip MK 4 Condition of the machine very good. The machine has a very smooth running behaviour Forklifts available, freely loaded trucks Shipping by freight forwarder possible Location of the machine D-48324 Sendenhorst for enquiries 0157-35496006

There are 2 lathes available. Oerlikon, year of manufacture: 1980s. Heidenreich & Harbeck, year of manufacture: 1962. On-site inspection is possible.

Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead and pull spindle lathe type V3 -Turning length: 1800 mm -Swivel Ø over bed: 530 mm -Turning Ø over support: 330 mm -Spindle bore: Ø 62 mm -Spindle speeds: 14 - 710 rpm see photo -Three-jaw chuck: Röhm Ø 315 mm -Tailstock mount: MK5 -Accessories: tool holder/tools see photos -Dimensions: 1100/3460/H1250 mm -Weight: 2650kg