hand used for sale

Handwheel JAKOB pulses per revolution: 100 flange: 108 x 108 mm spare part for Toyoda HES52 ! used ! Dimensions: 110 x 110 x 120 mm

Hand Lever Valve, Hydraulic Valve ORSTA HNN 012003 Pn 16 MPa Qmax 16 l/min New ! Dimensions: 110 x 85 x 225 mm

Hydraulic Hand Pump PAGUS K24 R ( K24R ) 8806006 Pmax = 100 bar (measured) with approx. 2 m connection hose used, tested ! Dimensions: 370 x 300 x 170 mm

Thread gaugering set, 4 pcs. Thread good gauges, left-hand thread PAGUS M 6 - M 12 M 6: Ø 32 x 7 mm M 8: Ø 30 x 8 mm M 10: Ø 32 x 10 mm M 12: Ø 38 x 13 mm used, Tested ! Dimensions(set): 40 x 40 x 40 mm

Hand lever valve, directional control valve MARTONAIR SP/M1B/7 2 - 10 bar used, tested ! Dimensions: 200 x 110 x 160 mm

Hand Screw Press, Balance SPM YB-3 pressure max: 20.000 kg Width between column: 380 mm stroke: 200 mm greatest height: 320 mm Table bore: Ø 76 mm Balance diameter: Ø 1450 mm Table: 1120 x 1120 mm Dimensions: 1450 x 1450 x 2110 mm

Hand lubrication pump TECALEMIT 1.401 3022 Tankinvalt: approx, 0.25 l used, tested ! Dimensions: 250 x 100 x 160 mm

Hand spindle press Compressive force: presumably approx. 6000 kg Table surface: 390 x 250 mm Spindle diameter: Ø 40 mm Plunger stroke max: 25 mm Distance table-ram: 55 mm projection: 100 mm Dimensions: 440 x 390 x 510 mm

Hand lever shears Pagus 1 BR/6 Sheet thickness: 4 mm Knife length: 180 mm Dimensions: 400x100x1500 Year of construction 1995

Two-hand machine control, safety two-hand control switch SQUARE D, HIGH-VOLTAGE CURRENT GUMMERSBACH ZHB accident protection system PREVENTA with emergency out ! used. tested ! Dimensions: 460 x 165 x 145 mm

Hand grinder, bendable shaft, flexible shaft SEW S2198 speed: 2990 rpm Power consumption: 1650 watts voltage: 380 V/ 2.7 A year of manufacture: 1975 used, tested ! Tool dimensions 160 x 32x 20 mm

Round Stitching Wire Set, Round Stitching Wire Galvanized PAGUS 1a Round Stitching Wire No. 28 Diameter: Ø 0.41 mm Coil: Ø 300 mm Quantity: 7 x 14.5 kg Set consists of 7 rolls of circular stitching wire ! New !' Dimensions: 630 x 310 x 500 mm

Hand grinder, bendable shaft, flexible shaft SEW S2198 speed: 2990 rpm Power consumption: 1650 watts voltage: 380 V/ 2.7 A year of manufacture: 1975 used, tested ! Tool dimensions 160 x 32x 20 mm

Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!

Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.

Manufacturer: Telestack Model: TS 1042 Task: - Material: Wood chips - Max. Feed Piece Size: 0-80 mm, max. 100 mm - Max. Bulk Density: Approx. 0.4 t/m³, max. 0.5 t/m³ - Average Capacity: Approx. 225 t/h, max. 250 t/h - Moisture Content: 20% - Description of Use: Stockpiling of wood chips in storage boxes Technical Specifications: - Receiving Box: Designed for material transfer from screening, crushing, or belt systems - Pick-up Height: Approx. 3,000 mm (depends on the conveying angle) - Max. Feed Grain: 100 mm - Height Adjustment: Hydraulic height adjustment and telescopic device from the control panel - Belt Length: Up to approx. 42,720 mm - Max. Discharge Height: Up to approx. 14,520 mm - Belt Specifications: - Smooth belt, 1050 mm wide - Three-layer EP400 4:2 Electric Drive System: - Main Belt: 18.5 KW - Telescopic Belt: 2 x 5.5 KW - Telescopic Drive: 1.1 KW - Electro-hydrauli ...

Manual Roll Stacker and Turner for Tetra Pak Packaging Material Rolls Practical manual handling device designed for safe stacking and turning of Tetra Pak packaging material rolls in production and warehouse environments. This unit is brand new and unused, making it an excellent solution for efficient roll handling in carton packaging facilities. General Information - Machine Type: Manual Roll Stacker and Turner - Application: Handling of Tetra Pak packaging material rolls - Year of Manufacture: 2023 - Condition: New and unused - Working Hours: 0 hours Technical Specifications - Maximum Pick-Up Weight: 400 kg Key Advantages - Designed specifically for Tetra Pak packaging material rolls - Enables safe lifting, stacking, and turning operations - Manual operation for flexible use in production or storage areas - Brand new unit with 0 working hours - Suitable for packa ...

Unused, stock item, Model Standard, A4- A6, IP 65, max. load capacity 30 kg, weight 99 kg, warranty

sheet width - max.: . mm plate thickness: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Blade length 300 mm The technical data are manufacturer or operator specifications and therefore not binding for us. We reserve the right to prior sale, only our business and sales conditions apply.About usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopYou want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Pinomatic, Type: Pinomatic U, Year: 2000, Angular transfer: yes, Work piece width min-max mm: 1300, Roller width in mm: 1300, Dimensions L x W x H mm: 3500x5500, Year :2000

Manufacturer: Bargstedt, Type: Winkelübersetzer, Control: no, Angular transfer: yes, Work piece width min-max mm: 1050, Min.-max. workpiece length in mm: 2500, Working length max mm: Länge Rollbahn 5300, Feeding speed max m/min: ca. 10-30, Feeding speed continous adjustable: möglich, Aushebestationen: Rechenaushebung Teilung 150/länge Rechen 2600 mm mm, Roller width in mm: 850, roller diameter mm: 60, Working hight mm: 920, Lift out roll system: Schiene, FREE TEXT: 2 Motore Antrieb Rolle/1 Motor Querübergabe,

Manufacturer: IMA Winkelübergabe mit Riemenaushebung, Year: ca 1998, Control: no, Work piece width min-max mm: 900, Working length max mm: 1900, Feeding speed max m/min: 5-30, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, roller diameter mm: 60, Working hight mm: 930 +- 50, Lift out roll system: für Riemen, Engine power kW: 2 X 0,75, Year :ca 1998

Manufacturer: Koch Winkelübergabe, Type: mit pneimatischem Überschwieber, Year: ca.1998, Working length max mm: 2000, Working widht max mm: 300, Feeding speed min m/min: 5-20, Working hight adjustable mm: yes, Year :ca.1998

Manufacturer: Mechnika , Year: 2009, Control: Mekanika/Omrom, Work piece width min-max mm: 60-220, Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 10-40, FREE TEXT: Transporbandlänge ca.4500 mm<CRLF>Übegabestation in Doppelendprofiler, Year :2009

Manufacturer: Cefla Winkelübergabe, Year: 2005, Angular transfer: yes, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350 - 3800, Min.-max. workpiece height in mm: 10-40, Working length max mm: 3900, Feeding speed max m/min: 10, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Roller width in mm: 1400, roller diameter mm: 80, Working hight mm: 900 +/-, Lift out roll system: yes, Engine power kW: 4, Year :2005

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

Shuttle kiln for the production of Hand Formers Unit No 5: 5.8m3 shuttle kiln, year 2017, USD 30,700 Unit No 6: 7.7m3 shuttle kiln, year 2018, USD 56,500 Unit No 37: 9.0m3 shuttle kiln, year 2020, USD 74,100 Unit No 24: 7.7m3 shuttle kiln, year 2021, USD 97,700 Unit No 23: 9.0m3 shuttle kiln, year 2021, USD 107,400 For further inquiry, can email to: sywee@topglove.com.my

number of controlled axis: 6 workpiece weight: 120 kg throat: 3096 mm Control: Kuka total power requirement: - kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: - m Industrial robot with deburring unit - Robot control: Type: VKR C4 - ESTA small dust extractor OM-8 - Teach panel with connection cable (visible in the control cabinet) - External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) - Mounted additional attachment on robot flange, for grinding & deburring application - Base for stationary floor mounting - Control & power cables already assembled and integrated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are offering for sale a EuroPallet complete system consisting of the following components: - Block destacker - Skid nailer - Skid inserts - Deck board insert - Main nail machine - Skid milling machine - Burning device - Corner saw - pallet stacker - Outfeed conveyor This offering includes a variety of makes and models, assembled from multiple sources. The equipment spans model years from 1980 to 2005, providing a diverse and robust setup. The system is designed for efficient operation, requiring only three personnel. It currently produces approximately 150 pieces per hour, with potential for significantly higher output through minor adjustments or upgrades. Find more here - / Contact us at -

Toyota BT Quick Lift pallet truck 2300kg 1150 mm RA2231 Manufacturer: Toyota Fork length: 1150 mm Fork width: 156 mm Carrying surface width: 520 mm Maximum load capacity: 2300 kg Lifting range: 85 - 200 mm With quick lift, 2x pumping is sufficient to be off the ground, with a maximum load of 150 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible.

honing diameter: 110 mm stroke: 150 mm throat: mm total power requirement: 2,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible.

pressure: 25 t stroke: 250 mm table-size: 400 x 500 mm surface of ram: 200 x 500 mm weight of the machine ca.: 0,9 t dayligth: 400 mm distance between columns: 500 mm - Handspindelpresse, gebraucht Balancier, used Typ/ type: PSHZ 25/I Preßkraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgröße/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Gewicht/ weight: 0,9t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

20.000 litre, Stock number: T3918, Litre: 20.000 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Double jacket: No, Insulated: No, Tank cover: In the top Ø 500 mm., Agitator: No, Inner diameter: Ø 2350 mm., Total height: 5575 mm., Plate type: Stained type B2, Interior finish: All weldings are sanded grain 60, Outer finish: All weldings are sandblasted, Working temperature: 0- +50 °C, Density: 1,0, Working pressure tank: Unpressurized, Manufacturer: Handing

Stock number: SF181, Hand sieve,, mesh size 0,7/1 mm., Ø 560 mm.

Automation incl. pallets for pick-up with Erowa 4-fold zero-point clamping system

CONTROLS   CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in use Payload 500 kg Up to 1200 cycles/hour Vertical reach 3024 mm Horizontal reach 3159 mm Weight 2300 kg 2 units available

25.000 litre, Stock number: T3837, Tank, stainless acid proof steel AISI 316,, closed top, standing on 4 legs., Conical top 15°., Conical bottom 20°., Tank cover on top, Ø 500 mm., 1 pc. Ø 2½ connection piece in bottom centre., 1 pc. Ø 4 connection piece on top., 1 pc. Ø 1½ connection piece in top centre., Tank dimension Ø 2600 mm x shroud 4500 mm., The tank is made in stained plate type B2., All weldings on the inside are grinded grain 60., All weldings on the outside are sandblasted., Density: 1.0., Working temperature: 0-+50°C., Working pressure: None, Scope of application: A, Litre: 25.000, Material: Stainless acid proof steel AISI 316

21.500 litre, Stock number: T3621, Tank, stainless acid proof steel,, closed, standing on 4 legs., Conical top 15°., Conical bottom 20°., Tank cover in the top Ø 500 mm., 3 pc. connection pieces, All welding on the inside are grinded grain 60., All welding on the outside are sandblasted, Tank dimension Ø 2500 mm x shroud 4180 mm., The tank is made in stained plate type B2., Density: 1.0., Working temperature: 0-+50°C., Working pressure: unpressurized., Scope of application: A, Litre: 21.500, Material: Stainless acid proof steel AISI 316

Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

Measuring machine with hand-held measuring arm STIEFELMAYERhigh-precision measuring and marking plate cast steel-grey cast iron strongly ribbedMasch. No. 22890285 year of construction 1985Length 2500 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1970 mm, Y = 815 mm, Z = 840 mm- with 3-axis digital display Grundig MZ 1030- 5 pieces height-adjustable feetSpace requirement L x W x H 2500 x 1500 x 2500 mmWeight 3000 kgvery good surface;

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

Measuring machine with hand-held measuring arm STIEFELMAYERMess and marking plates cast steel-grey cast iron strongly ribbedHigh-precision measuring plate with good surfaceYear of construction 1985Length 2000 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm- with 3-axis digital display Grundig MZ 1030- machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces of height-adjustable feetSpace required