british flag
Resale Logo

hand used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machine tools  Firma KAI - Tec GmbH & Co. KG  http://www.kai-tec-maschinen.de 
banner logo
start page > keywords hand > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125517876 702

WP Werner & Pfleiderer UK 600 for sale
double Z Kneader / Sigma Kneader


Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: 600 Liter Doppel-Z – Kneter dimensions pot: 1000 x 1100 x 900 mm (lxbxh) Utilizable ...

 
Many thanks for your interest on our second hand machines, please find follow our offer:
manufacturer: Werner & Pfleiderer
Type: 600 Liter Doppel-Z – Kneter
dimensions pot: 1000 x 1100 x 900 mm (lxbxh)
Utilizable contents: ca. 600 l
Weight: ca. 3.000 kg
different: - mechanical rebuilt from the last owner
- product touching parts in stainless steel
- motorized tilting about the front axle with tilt motor

We offer this machine in 'as is' condition, without warranty, ex location Europe (EXW)

 
Price  
    request
125515593 1010

HAULOTTE H16TPX Diesel, 4x4 Drive, 16m Working Height, Jib, for sale
Telescopic handlers


; Gross weight [kg]: 7070; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 7070; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
2008
14,900 €  
  NL   request
125517874 702

HECRONA 500 for sale
double Z Kneader / Sigma Kneader


Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Hecrona Type: 500 double Z Kneader / Sigma Kneader Utilizable contents: ca. 500 Liter Weight: ca. 2.800 kg  ...

 
Many thanks for your interest on our second hand machines, please find follow our offer:
manufacturer: Hecrona
Type: 500 double Z Kneader / Sigma Kneader
Utilizable contents: ca. 500 Liter
Weight: ca. 2.800 kg
different: - fully rebuilt from the last owner
- product touching parts in stainless steel
- motorized tilting about the front axle with tilt motor

We offer this machine in 'as is' condition, without warranty

ex location north-east europe, (EXW)unpacked

 
Price  
    request
125515595 1010

OMME 2200RBD BI-Energy, 21.8m Working Height, Wirelessl for sale
Telescopic handlers


; Gross weight [kg]: 3160; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 3160; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200
2007
32,500 €  
  NL   request
125517872 107

MESSER GRIESHEIM Quicky for sale


Here an automatic burner car is sold by the manufacturer of Messer Griesheim, type Quicky With a range of practical options such as double insulation and Optional mains voltages of 230 V and 115 V, the Quicky® ...

 
Here an automatic burner car is sold by the manufacturer of Messer Griesheim, type Quicky
With a range of practical options such as double insulation and Optional mains voltages of 230 V and 115 V, the Quicky® offers an increased level of security. The speed controller ergonomically integrated in the handle allows easy use.

Simple adjustment possibilities of the burner position both in height and sideways and a cutting torch, clean cuts up to 100 mm structural steel, ensuring optimum results.

The wide range of options makes the Quicky® the optimal cutting machine for every application. The wide range of practical options ensures flexible handling for numerous applications.

Features:
Sure: Topiary simply by hand double isolated and available with 115 V and 230 V, power circle cutting attachment, led
Capacity by default up to 100 mm cutting thickness

State needed, (like new) was only once briefly in use as you can see on the pictures.

See picture.

Cut thickness longitudinal 3-100 mm (vertical cutting) V-cuts (MITRE cuts), automatic and circular cuts for diameter 60-1500 mm. continuously variable drive 100-1100mm / min stepless height and lateral adjustment of the burner. Forward / reverse and overrunning clutch.

For any further questions email or Tel. 0160/3655231
 
750 €  
    request
125515597 1010

OMME 2200RBD BI-Energy, 21.8m Working Height, Wirelessl for sale
Telescopic handlers


; Gross weight [kg]: 3160; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 3160; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
2006
29,500 €  
  NL   request
125517870 702

WP WERNER UK 14 1/2 for sale
double Z Kneader / Sigma Kneader


Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: UK 14 ½ Doppel-Z – Kneter Utilizable contents: approx. 350 l Weight: approx. 2. ...

 
Many thanks for your interest on our second hand machines, please find follow our offer:
manufacturer: Werner & Pfleiderer
Type: UK 14 ½ Doppel-Z – Kneter
Utilizable contents: approx. 350 l
Weight: approx. 2.800 kg
different: - machine need New painting, mechanical and
electrical contoling before work
- product touching parts in stainless steel
- double jacked for heating
- motorized tilting about the front axle with tilt motor
- Working hours approx 2947 (read from counter)

We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging.

EXW - ex Warehouse Hess. Lichtenau, unpacked

 
Price  
    request
125515599 1010

JLG 660SJ Diesel, 4x4 Drive, 22.32m Working Height, Ro for sale
Telescopic handlers


; Gross weight [kg]: 13885; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 13885; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 230
2000
13,900 €  
  NL   request
125517868 702

WP-Werner & Pfleiderer UK11 for sale
double Z Kneader / Sigma Kneader


Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: Double Z Kneader UK11 with hand tilting imensions pot: 400x400x330mm (lxbxh) Utilizab ...

 
Many thanks for your interest on our second hand machines, please find follow our offer:
manufacturer: Werner & Pfleiderer
Type: Double Z Kneader UK11 with hand tilting
imensions pot: 400x400x330mm (lxbxh)
Utilizable contents: ca. 40 l Gesamt / 30kg Teig
imensions: 1700x1300x1650mm (l/w/h)
Weight: ca. 530 kg
different: - hand tilting
- standard steel construction

We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging.

ex Warehouse Hess. Lichtenau, (EXW)unpacked


 
Price  
    request
125515601 1010

JLG 660SJ Diesel, 4x4 Drive, 22.32m Working Height, Ro for sale
Telescopic handlers


; Gross weight [kg]: 13372; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 13372; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
2001
14,900 €  
  NL   request
125517866 702

WP - Werner & Pfleiderer UK 17 for sale
double Z Kneader / Sigma Kneader


Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: W&P Werner & Pfleiderer Sigma Kneader Type: UK 17 Type VIII double Z Kneader Utilizable contents: ca. 1000 Liter ...

 
Many thanks for your interest on our second hand machines, please find follow our offer:
manufacturer: W&P Werner & Pfleiderer Sigma Kneader
Type: UK 17 Type VIII double Z Kneader
Utilizable contents: ca. 1000 Liter - 600kg dough
Weight: ca. 5.000 kg
different: - machine is from last owner fulle rbuilt
- machine is New paint, mechanical and electrical overhould
- product touching parts in stainless steel
- double jacked for heating
- motorized tilting about the front axle with tilt motor

We offer this machine in 'as is' condition, without warranty

 
Price  
    request
125515603 1010

JLG 460SJ Diesel, 4x4 Drive, 16m Working Height, Jib, for sale
Telescopic handlers


; Gross weight [kg]: 7749; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 7749; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 230
2002
12,900 €  
  NL   request
125517864 702

MEILI 200 for sale
double Z Kneader / Sigma Kneader


Many thanks for your interest in our second-hand machinery, please find below our offer: manufacturer: Fritz Meili Type: 200 Doppel-Z-Kneter pott dimensions: 600x600x500mm Contents: 150-180 L (usable) Enginepowe ...

 
Many thanks for your interest in our second-hand machinery, please find below our offer:
manufacturer: Fritz Meili
Type: 200 Doppel-Z-Kneter
pott dimensions: 600x600x500mm
Contents: 150-180 L (usable)
Enginepower: 7,5 KW
dimensions: ca. 2000x1300 x 1600mm
weight: ca. 2000 kg
different: product touching parts in SS
protective grille and lid
hydraulic tiltable
partially NEW electric (new cabinet with contactors)
hydr. Engine NEW
main Engine repaired

We offer this machine in 'as is' condition, without warranty

ex Warehouse Hess. Lichtenau, unpacked

 
Price  
    request
125515605 1010

JLG 460SJ Diesel, 4x4 Drive, 16m Working Height, Jib, for sale
Telescopic handlers


; Gross weight [kg]: 7620; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 7620; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
2000
10,900 €  
  NL   request
125499314 1405

AUMUND diverse for sale
Portal crane


Auction name: Partner auction BVA Auctions & Dechow | Metalworking machinery and equipment (53482) Online auction Start of auction: 16 May 2018 10:00 GMT +0200 (Western Europe (DST) Closing time: 11 June 2018  ...
used machine
 
Auction name: Partner auction BVA Auctions & Dechow | Metalworking machinery and equipment (53482)



Online auction

Start of auction: 16 May 2018 10:00 GMT +0200 (Western Europe (DST)
Closing time: 11 June 2018 09:44 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information contact: support@dechow
1963
10,000 €  
  DE   request
125515607 1010

JLG 460SJ Diesel, 4x4 Drive, 16m Working Height, Jib, for sale
Telescopic handlers


; Gross weight [kg]: 7906; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 7906; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
2001
12,900 €  
  NL   request
125480017 101

SMTCL VMC 1051 for sale
Numerically Controlled Machining Centres


Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delive ...
used machine
 
Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delivery immediately cargo Base EX WORK technical details x way 1020 mm y way 510 mm z trail 650 mm CNC CNC FANUC 0I MC FANUC table size 1120 X 510 mm ISO 40 spindle adaptor bt spindle speeds 8000 1/min spindle drive motor (30 min) kW tool changer 15 for 24 tools
maximum table load of 1000 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 30 m / min feed range 20000 mm / min weight 7 tons of space approximately 3.0 x 2.60 x 2,90 m description - control: FANUC OI MC.
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2007
28,000 €  
    request
125515609 1010

JLG 400S Diesel, 4x4 Drive, 14m Working Height, Rough for sale
Telescopic handlers


; Gross weight [kg]: 6319; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 6319; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
2001
9,800 €  
  NL   request
125480011 101

YCM SUPERMAX MV 106 A for sale
Numerically Controlled Machining Centres


Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of o ...
used machine
 
Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of origin Taiwan delivery time immediately cargo base EX WORK technical specifications x way 1020 mm y-way 600 mm z-way 600 mm FANUC CNC control 20 I FANUC table size 1120 X 650 mm spindle retainer ISO 40 spindle speeds 8000 bt 1/min spindle drive motor (30 min) kW tool changer 18 for 24 tools of Max table load 1200 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 12 m / min feed range 1-5000 mm / min weight 7 tons of space approx. 2.90 x 2.60 x 2.50 m description - St FANUC euerung 20 IN the
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2006
27,500 €  
    request
125515611 1010

JLG 120HX Diesel, 4x4x4 Drive, 38.4m Working Height. for sale
Telescopic handlers


; Gross weight [kg]: 20021; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 20021; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 230
1995
19,800 €  
  NL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Transfer Presses ( 2 - 4 Columns) ERFURT PTRZSST 210


Transfer press ERFURT PTRZSST 210 was built in the year 1991 in Germany. The progressive press ERFURT PTRZSST 210/11/280-technical parameters: -maximum pressure: 160 tons -the number of jumps: 20-40 min-1 -the maximum stroke of the upper table: 400 mm -adjustable handles tools: 63 mm -working capacity per stroke: 40 kNm -depth of draw: 125 mm -the strength of the ejector: 50 tons -ejector stroke: 80 mm -adjust the ejector: 63 mm -the range controlled by the ejector: 63 mm -distance between columns: 3500 mm -the distance between the centres of the utility: 280 -number of posts: 10 -overall dimensions: 6.6 x 2 m -weight: 80000 kg

Pallet transport line EUROPA SYSTEM 20.101122.01


Line for pallet transport EUROPE 20.101122.01 SYSTEM was built in the year 2011. The line is intended for the transport of EURO pallets with details that may protrude beyond the skid up to 200 mm, the performance line-to 74 pallets for a change. The line is used for the transport of EURO pallets of goods with the indirect their handling by the operators. Transport takes place on a conveyor line [1.1]-[1.7]. The system consists of: -pallet roller conveyor loading zone [1.1] -a team of two chain conveyors [1.2, 1.3] -non-driven medium roller roller conveyor [1.6] -chain conveyor accumulation of nep?dem [1.7] -gravity roller conveyor [3] -pallet storage built onto conveyor roller [5] -roller conveyor driven [5] -gravity roller conveyor [6] -non-driven medium roller roller conveyor [1.6] -ball tables, used for the transport of EURO pallets conveyor conveyor [7.1, 7.2] Pallet storage lines are used to transport items on pallets. Pallet magazine can fulfill two functions to retrieve the pallets from the line and collected a heap or stack download pallets and then issuing a pallet lines one at a time. Pallet magazine EUROPA 20.101122.01 SYSTEM-technical data: -the maximum stack weight: 600-1000 kg -maximum number of pallets collected by the magazine: 10-25 -operating pressure: 6-8 bar

End Milling Machines Graule, Elumatec 2015


Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due to the wide stop plate Support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Minimum-volume lubrication system for saw blades Technical specifications Lower saw unit (vertical): Saw blade diameter 650 mm Tilting angle max. 45° towards front and 55° towards back, home position: Saw blade vertical Max. cutting height of 260 mm at 90° Max. cutting height of 187 mm at 135° Max. cutting height of 130 mm at 30° Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 1,400 rpm Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting angle max. 55° downwards and 60° upwards, home position: Saw blade horizontal Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 2,710 rpm Travel 950 mm Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position, 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

STAINLESS STEEL WIRE DRAWING MACHINE SUMITOMO 5.5 - 1.2 MM DIA.


Qty. 1 Second-hand stainless steel wire drawing machine Mfc.: Sumitomo(Japan) Built: 1996 Wire dia.: 5.5 mm ~1.2 mm Stainless Steel wire drawing machine Material: SUS304, SUS440, SUS303Cu Inlet: Stainless steel dia. 5.5 mm (In case tension strength: 70 kg/mm2 below) Outlet diameter: Minimum 1.2 mm (In case tension strength: 230 kg/mm2 below) Inlet speed: Max.100 m/min Outlet speed: Max. 1200 m/min Finishing Precision: plus/ minus 0.02 mm Product capacity: Max. 1120 kg/hr Stands: dia.130 mm x13 stands+dia.80 mm x19 stands=32 stands

AUTOMATIC SHEETS STORAGE SYSTEM MATTER SRL MAT 00.6


Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )

Filling and vacuum filling machines handtmann VF 612


Push vacuum Handtmann type F 612, lift tray 100 L, supplied with six bins, twist, automatic hand portion.

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

CNC Milling Machines MATCHMAKER VMC 1100 CNC


CNC milling center MATCHMAKER VMC 1100 was built in England in 2006. Technical data of the CNC machine MATCHMAKER VMC 1100: -CNC control: FANUC 0i-MC -Working feeds X, Y, Z: 1100 x 550 x 600 mm -table size: 1300 x 630 mm -spindle speed: 8000 RPM -handle tools: BT 40 -tool Magazine: 20 PCs. -machine weight: 6000 kg

CNC Hydraulic Plate Shear LVD HST-E 31/6


CNC guillotine shears LVD HST-E 31/6 produced in 2003 year. Technical parameters of CNC cutter LVD HST-E 31/6: -maximum cutting length: 3000 mm -position the rear bumper: 5-1000 mm + Manual 3.5 – 1000 mm -cut on the rear bumper: 800 x 3000 mm -the thickness of cut material: Steel-6 mm, aluminium-6 mm, St37-6 mm -power: 9.5 kW -the cutter dimensions (l x h x w): 4000 x 1760 x 2730 mm + handles 1120 mm

CNC Turning Machines DOOSAN PUMA 240 MB CNC


CNC lathe DOOSAN PUMA 240 MB produced in 2007 year in Korea. The machine is equipped with a FANUC Series 21i-TB. Cnc lathe allows for effective machining, which allows you to save time and gain accuracy. CNC lathe-specific data DOOSAN PUMA 240 MB: -number of tools: 12 PCs. -the number of driven tools: 2 PCs. -spindle: 65 mm -stroke x axis: 205 mm -stroke y axis: 580 mm -diameter of the handle: 225 mm -rated power: 28.95 kVA -weight: 4140 kg -hydraulic Chuck -horse -four-bed

Universal grinding machines KOMMUNAR 3Y131 (3U131)


Universal grinder for shafts and bores KOMMUNAR 3Y131 (3U131) produced in 1977 year in the Soviet Union. The machine is designed for external and internal grinding of cylindrical surface, and the surface of the flat flange, conical shaped. Grinder allows external grinding machines with automatic grinding wheel, on the headland of the table or a hand-fed and sanding with manual feed. Universal 3Y131 Sanders-specific data: -the maximum diameter of workpiece: 280 mm -maximum length of workpiece: 710 mm -the maximum diameter of workpiece in podtrzymce: 60 mm -height of tusks: 185 mm -maximum weight of workpiece: 55 kg -the largest grinding wheel diameter: 600 mm -rotation speed spindle grinding wheel diameter: 600 Prov 1111 Rev/min -the maximum angle of rotation of the spindle head: 30 degrees -the maximum diameter of the cut: 100 mm -maximum length of cut: 125 mm -spindle speed: 16900 RPM. -the size of the sanding spindle head stroke after bolt: 290 mm -time supply fast grinding wheel: 2 s -the size of the feeding speed, spindle head szlifirskiego from hydraulic drive: 50 mm -feed for one turn of the wheel: 0.5 mm -the value of the plot of limbusa feed precision: 0.001 mm -the value of the parcel for the diameter transverse feed limbusa: 0.005 mm -periodic feed grinding spindle head (headland of the table): 0,0025 – 0,025 mm -fast speed adjusting sanding spindle head: 240 mm/min -the amount of speed of rotation of the product: smooth, bezskokowa speed control -speed range: 40-327 RPM -angle of rotation: 0-90 degrees -dimensions of centres: SM4 -the weight of the grinder with accessories: 6200 kg -size grinding machines (at the extreme position of the moving parts): 5620 x 2585 x 1982 mm

Filling Line KHS 50 000 bph and returnable KHS GmbH Glass bottles 0.33 and 0.5 ltr


Filling Line KHS 50 000 bph new and returnable bottles glass bottles This line is made by KHS in year 2005 and it was in operation till July 2013. It still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. This line has also a bottle washer but not crate handling Main Characteristics • Capacity 50 000 bph at 0.5 liter bottles • Made by KHS in year 2005, in operation till 2013, still installed • For both new and returnable glass bottles, operated for 0.5 liter bottles only • Secondary packaging Kisters shrink tray packer and KHS palletizer • Operation controls made with Siemens Simatic S7 PLC system • Complete line in fair condition and immediately available for relocation List of main equipment 1. Bottle Depalletizer KHS Innopal 2. Bottle Washing Machine KHS Innoclean – compact design a. Capacity 55000 bph b. Double ended c. Two washing sections and a rinsing section 3. Empty Bottle Inspector OMNIVISION II by Filtec year 2008 4. Filling Block KHS Innofil DMG VVF/SVF, year 2005 a. Rinser with 112 heads b. Filler with 120 filling heads c. 18 capping stations for crown cork d. Hot water injection for beer foam creating before closing e. Automatic outside washing system f. Comes with 2 sets of spare parts for each (two) bottle format g. Crown cork feeding system by MSN Magnettechnik (with magnet conveyor) 5. Level Inspection System KHS Metec Promecon 4000 with two measuring bridges (x-ray) 6. Flash Pasteurizer KHS Innopro KZE a. with 11 m3 buffer tank, diameter 2.0 m, insulated 7. Air Dryer ACI one section approx. 2 meters 8. Labeling Machine KHS Innoket KL 2080, year 2005 a. Type KL 2080-40/120-48 PM P1 b. With two labeling stations for 3 labels – front, back, neck c. How glue system d. Inbult Date printer Lasetec (laser) e. Data printer Videojet inkjet printer Excel 170 i 9. Label Inspector KHS Metec Promecon 3000 with measuring bridge (x-ray) 10. Kisters TSP 050 B Secondary Packaging Machine, year 2005 a. For tray, film and colored film b. Packaging configurations 5 x 4 (6 x 4) 11. Transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit 12. Palletizer KHS Innopal PN 1 N (H) 2 13. Pallet stretch wrapping machine Robopak 14. Pallet conveyor to warehouse

Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year Steinecker Complete brewery


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment. Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left. For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs

Bespoke Bagtumbler


Make: Bagtumbler Model: Bespoke Model Condition: Used Machine type: Other Location of machine: UK Machine Details Manufactured by Bespoke Handling Equipment Consists of a vacuum drum, which then rotates to mix. Equipment Use The equipment works by putting a quantity of pigment into a plastic bag which goes inside the drum, the vacuum then ensures the bag remains in place, the drum rotates and the material is mixed. Further documents available

ALUMINIUM LOGS - BILLET CASTHOUSE GAUTSCHI, SISTEM TEKNIK LOG DIA. 7 & 8 - L = 7.0 M


Qty. 1 Second-hand complete aluminium logs casthouse Mfc.: Gautschi, Sistem Teknik, Assimakis Built: 1990’s Refurbished: 2014 Log sizes: dia. 7” & 8” – 178 mm & 203 mm Length: 7.0 m max. Capacity: 75 Tons/day 22,000 Tons/annum

ALUMINIUM EXTRUSION PRESS CLECIM 2200 MT - 9 - 229 MM


Qty. 1 Second-hand aluminium extrusion press with billet furnace Mfc.: CLECIM Force: 2200 MT Built: 1986 Dismantled in 7/2017 Billet size: 9” – 229 mm Press size: approx. 2200 mm x 7700 mm Press weight: approx. 100 ton (body) + 50 ton (hydraulic unit) + 20 ton (Billet heater) 30 ton(etc.) = apprpx. 200 ton Hydraulic Pressure: Max. 500 bar (500kg/cm2) Nominal hydraulic pressure: 300 bar (300kg/cm2) Billet furnace Mfc.: TBA Built: 1986

CNC Milling Machines DECKEL MAHO DMU 50M


DECKEL MAHO DMU 50 m 5 axis cnc milling machine The DECKEL MAHO DMU 50 m 5-axis cnc milling machine is a small-scale 5-axis milling machine; the strokes X 500, Y 400, with 400 mm, year of construction 1999, CE standards, with CNC HEIDENHAIN TNC 310 m, iso 40 spindle with 4.500 revolutions and optical lines. It has 3 axes controlled and interpolated to CNC while the 2 rotary axis of the table are manually operated by means of special mechanical handwheels and the relative dimensions are shown on the control display; reconditioned exercise machine. The DECKEL DMU 50 m 5-axis cnc milling machine is a CNC machine particularly suitable for general machining of medium/small dimensions, such as in the tooling sector, molds, a motorcycle parts; especially for the milling of light alloys and is particularly known in the industry for its build quality, precision and versatility thanks to the possibility of being used also in manual thanks to the presence of the special leaflets, both for the 2 rotary axes ( mechanical) and for the 3 linear (electronic).

Filling and vacuum filling machines Handtmann VF200B


Abdrehgetriebe Typ 410, Haltevorrichtung Typ 416.

Pimespo Idea 10 TX 5253


Racks & Forklifts for Warehouse For sale exclusively at 10:30 the next 11 at our offices in Bergamo The merchandise is kept Cusago (Mi) To view the lot please contact us on 0307751645 and make an appointment Detailed catalogue available Racks & equipment -metal baskets stacking storage, about 160 -various types -power tools (drills, screwdrivers, jigsaw, manual strapping tool) -storage boxes (various sizes), nr. 16 -various material for packaging etc. Forklifts and pallet trucks -forklifts Pimespo mod. 5253, 1,000 kg Capacity 10 TX idea, year: 1999 -forklifts OM mod. E-25 N, payload: 2,500 kg -walk-behind Sweeper Maspel -hand pallet truck, nr. 7 -Manual lifters, nr. 3 Various Furniture and office equipment (# 7 workstations desk complete with seat), as well as accessory equipment of various kinds (# 2 sat navs, digital cameras # 2)

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

SACHMAN MX 1200 TNC 425


Technical data X travel mm.16000 Y travel mm. 1200 Z travel mm.2000 Spindle speed: RPM.4000 Autom.head KOSMO : 2,5°x2,5° Clamping surface: mt.1.1 x 18mt Data must be verify Standard equipment CNC HEIDENHIAN TNC 425 N.2 chip conveyor Auotm.tools changer 40 pos. Electronic handwheel N.3 Cubes: 5mt x 1,5 x 1,1H (each) N.5 Angle plates: H.2,5mt x 0,96mt x 1,2mt (each)

Glass Bottle Filling Line 55 000 bph RETURNABLE Krones AG beer 0.33 and 0.5 liter Glass


Glass Bottle Filling Line Krones 55 000 bph for returnable bottles This line was originally installed by Krones in year 1991 and it was upgraded till 2007. The line was in full operation till end of 2017 and it has been well maintained. This line has complete grate handling, both flash and tunnel pasteurizer, labeler with two labeling carousel and most of machines has Siemens S7 PLC controls. Main characteristics: Made by Krones Made in years 1991- 2007 Capacity 55 000 bph Product Beer Bottels 0.33 and 0.5 liter returnable glass bottles Status Installed Video 1: abcs://youtu.be/3IpDGJ8Le18 Video 2: abcs://youtu.be/Q7tEyWdSzJw

Glass Vessel Reactor Stirring Apparatus


Glass spherical mixing vessel 50l - mobile VA tubular frame (demonstration model). Mixing motor speed: 0-700/min, power: 0.55kW, mechanical seal: Al2O3/PTFE , PTFE angled blade agitator: 4 winged/ pressing, PTFE handhole cover DN: 100L with quick lock, bottom angle valve: DN 25/ 22 Olive, operational temperature: -10° to 140°C, operational pressure: -1 to 0.5bar, stainless steel pipe construction with VA/Gi swivel castors, with CE plug 16A and motor protective switch.

ALUMINIUM BILLET FURNACE SISTEM TEKNIK ABHF-2500-805-0316


Qty. 1 Second-hand Aluminium Log Furnace Mfc.: Sistem Teknik Type: ABHF-2500-805-0316 Built: 2004 Log dimensions: dia. 178 x 12600 mm length Capacity: 2.5 t/h Max. temperature: 550 °C Installed power: 1.171.000 kCal/h + 30 kW Hot shear Mfc.: Assimakis S.A. Type: 2LEVFLY Max. force: 215 MT Scope of supply: Log feeding system Recuperator Log furnace Log hot shear

VERTICAL SPINNER BLOCK FOR COPPER TUBE FENN MANUFACTURING CO. VNC 60-5


Qty. 1 Second-hand vertical spinner block for copper tube Mfc.: Fenn Manufacturing Co. Model: VNC 60-5 Built: TBA Block Diameter: 60" (1524 mm) Speed Range: 1800-3600 FPM (550-1100 m/min.) Max. Incoming Tube Diameter: 1" (25.4 mm) Normal Incoming T ...

POWDER STRIP COATING LINE OTEFAL, GEMA 800-1500 MM - 0.8-2.0 MM THICK


Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degrea ...

Shandong FIN CNC Machine


Make: Shandong FIN CNC machine Model: BL1412 Series and APM2020 Condition: Used Machine type: Other Location of machine: Malaysia Service details: Full History Documentation / manuals included? Yes Is the equipment viewable under power? Yes  ...

HYDRAULIC BRIQUETTING PRESS OF SHAVINGS FRANZ ARNOLDS SÖHNE HSB 18 - DIA. 180 x 220 MM


Qty. 1 Second-hand hydraulic briquetting press of shavings Mfc.: FRANZ ARNOLDS SÖHNE Type: HSB 18 Built: 1989 Force: 8900 kN - briquettes diameter: 180 mm - height: 100-220 mm - weight Steel: 15-25 kg Gray iron: 16-22 kg Brass: 18-24 kg Alumin ...

INGOT CASTING MACHINE MASTERS & SONS LTD. INGOT WEIGHT 50 KG MAX.


Qty. 1 Second-hand ingot casting machine Mfc.: Masters & Sons Ltd. Built: 2012 Motor drive: 5.5 kW Size of ingots: Trapezoidal Length: 590 mm Ingot weight: max. 5.0 kg Capacity: max. 3000 kg/h Casting 2 ingots at once! Air cooling system Qty. 6 Vent ...

REBAR PRODUCTION LINE WOOJIN, HAEDUCK, KUANGNAM D10 - D32


Qty. 1 Second-hand rebar production line Mfc.: Woojin, Haeduck, Kuangnam, Built: 2-2001 Revamped in 2005 & 2009 Dismantled in 10/2014 – 2/2015 Currently in warehouse Entry Material – Billet: 120 sq.x 3,000 mm & 125sq. × 3,000 mm. Exit Material: D1 ...

Vacuum stuffer Handtmann VF 100 B


Condition: Overhauled Technical data: • overall dimensions 1550x1250x1860 mm; • power 5.5 kW; • power supply 400 V; • hopper 240 litres; • portioning 5-100 000 g; • capacity up to 5000 kg/h; • filling pressure 55 bar; • loader, portioning, twis ...

Depalletizing Station Kettner with pallet handling Krones Kettner Pressant Universal,Palmagazine


Depalletizing Station Kettner with two depalletizer and pallet handling system This depalletizing station was built in two phases by Krones Kettner, glass bottle depalletizer in 1998 and can depalletizer in 2002 with fully automated pallet handling s ...

Glass Bottle Filling Machine 60.000 bph KHS GmbH Innofill EM/SVF 132/24 KK


Glass Bottle Filling Machine KHS Innofill EM/SVF 132/24 KK Glass bottle filling and capping machine by KHS Innofill manufactured in year 2000, capacity 60 000 bph. This machine is mechanically controlled glass bottle filler for easy handling and opera ...

KHS Beer KEG Filling Line 60 KEG/h KHS GmbH 60 KEG/h S-type Filling Line


KHS Beer KEG Filling Line 60 KEG / hour This KEG line was delivered by KHS Till in year 1998 and later it was upgraded to Siemens Simatic S-7 PLC control. The line has flash pasteurizer with a 3 m3 buffer tank and semi manual KEG handling hoist. Filli ...

KEG Filling Unit for 5 liter Party-KEG Esau & Hueber 110 keg SEMI-FILL, semiautomatic


KEG Filling unit for 5 liter Party - KEG, Semiautomatic Esau Hueber 110 kph This KEG filler is semiautomatic with 3 filling heads, Handtmann MMS micro filtration system and cap closing unit manufactured in 2007 and hardy used and it was dismantled in  ...

Glass Bottle Crate Handling System 50.000 bph KHS GmbH Automatic 1100 crates/h


Complete KHS line for Returnable Bottle Crate Unloading and Empty Crate Palletizing, capacity 50 000 bph Complete fully automatic system for unloading returnable glass bottle crates (24 bottles/crate) from a pallet to de-crater, moving empty pallets t ...

Glass Bottle Filling Line Krones-KHS 55.000 bph Krones and KHS 0.33 and 0.5 L, with BWM


Glass Bottle Filling Line Krones-KHS 55 0000 bph with BWM This line is designed for new and returnable 0.33 and 0.5 liter glass bottles and it can handle up to 55 000 bph. The line was originally built in year 1998 but it has been heavily upgraded fro ...

REBAR PRODUCTION PLANT DANIELI, POMINI, FARREL DIA. 8 - 32 MM - L=6-14 M


Qty. 1 Second-hand rebar production plant Mfc.: Danieli, Pomini, Farrel, Allen Bradley Built: 1973 Refurbished in 2015 Stopped in 3/2018 Entry billet dim.: 120, 130 & 140 mm square Length: 8.0 m Rebar dimensions: dia. 8 – 32 mm Length: 6 – 14 m  ...

Tos Skoda W 200 mm Borer


Make: Tos Model: Skoda W 200 mm Borer Condition: Used Machine type: Other Location of machine: Italy Condition info: In good mechanical condition without wear Machine Details Boring Skoda W 200 mm Boring exaggeratedly robust second-hand mach ...

Paper cutters Schneider 115SC Video


Programmable memory Touch button control Video screen Cast iron bed with blowers Side tables – cast iron with blowers Rear table guards Side table guards FFM Two speed back gauge Variable foot pressure pedal Two hand knife control Spare blades  ...

Filling and vacuum filling machines Handtmann VF16/200


Description Brand Handtmann Model VF 16/200 ID 30008 Status Active Price 3.500 € + VAT Location Oradea, Romania Semi-automatic vacuum filler Handtmann VF 16/200, needs general inspection, parts are missing. ExWorks. Price is negotiable. C ...

Pallet trucks nh handling SLX 1000E


*From exposition Quick handling with with efficient electro - hydraulic pump. Places the load in the comfortable and ergonomically correct working position. Automatical activation of adjustable stabilizers when lifting higher more than 400 mm. Provide ...

Veneering presses Italpresse Mark/C


Pressing line ITALPRESSE MOD. Mark/C with 4500x1400 mm. worktop, diathermic oil heating, pressure 5 kg/cm, consisting of:-suction System for handling and loading goods -Motorized roller -Two-roller-spreading brand Osama CE -Roll way from Spreading -Co ...

Heat exchangers Alfa Laval CLIP6-RH


Stock number: UG6204 Second hand, refurbished, stainless steel plate heat exchanger by Alfa Laval type CLIP 6-RH (C6). Plates designed in stainless steel AISI 316L. Working volume 68.2 l. Working pressure 16 bar, test pressure 21 bar. Working temperatur ...

Rehandling excavators LIEBHERR A-904C


* ENG * For sale Liebherr A-904C. Description in English below. * PL * Do sprzeda?y Liebherr A-904C. Zapraszamy tak?e klientów z zagranicy. ************************************************ This machine is ready to work straight after purchase. Co ...

Punching machines Handsaeme Machinery


Auction name: Machinery of a car mats factory in Lokeren (Belgium) Online auction Start of auction: 16 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 24 April 2018 15:50 GMT +0200 (Western Europe (DST) The price listed is an op ...

Skewering machine, shish kebap, shashlik maker Emsens Tradition


Emsens Tradition Emsens Tradition produces a high quality product which is kebab. The skewers are perfect in every way, ensuring high quality and handmade appearance. The machine is equipped with a tape for loading meat Specification: Category us ...
Find used machinery dealers in your country