hand used for sale

Electric Hand Screwdriver, Electric Screwdriver WMW, POWER TOOLS SEBNITZ SRM 450 ( SRM450 ) 0,32 KW 1000 rpm 220 V 1AC 50 Hz Tool holder: 10 mm hexagon approx. 2.0 m Connection cable used, tested ! Dimensions (without cable): 380 x 180 x 70 mm

Electric Hand Drill, Electric Drill, Drill WMW, POWER TOOLS SEBNITZ HBM 200.1 ( HBM200.1 ) 0.3 KW 710 rpm 220 V 1AC 50 Hz drilling capacity: max. Ø 10 mm with drill chuck: Ø 1 - 10 mm approx. 3.0 m Connection cable used, tested ! Dimensions ( without cable ): 370 x 130 x 75 mm

Electric Hand Drill, Electric Drill, Drill WMW, POWER TOOLS SEBNITZ SBM 450.2 ( SBM 450.2 ) 0.45 KW 500 / 2000 rpm 220 V 1AC 50 Hz drilling capacity: max. Ø 13 mm tool holder: M12 x 1.25 Length: 14 mm approx. 2.5 m Connection cable used, tested ! Dimensions ( without cable ): 300 x 180 x 75 mm

Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhoehe / Lift high max. 1600mm Gabel Laenge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Handle Applicator Twin Pack More then 300 machines new and second hand on our seema .de

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dyson hand dryer, type: airblade DB, dimensions: 300 mm x 250 mm x 650 mm.

Elpress hygiene station with sole cleaner, hand disinfection unit and inlet control, number: 83202050, year of construction: 20.11.13, 400 V, 50 Hz, 16 A, 1 kW, weight: 225 kg, length brush: (2x) 930 mm, total dimensions: 1600 mm x 900 mm x 1200 mm.

Dyson hand dryer, type: airblade DB, dimensions: 300 mm x 250 mm x 650 mm.

Description: For bending long goods Bending range: 0 - 120° Hand lever length: approx. 700 mm Approx. Onsite Dimension. (l x w x h): 950 x 260 x 270 mm, weight approx.: 30 kg

Description: Consisting of various drills, a polishing machine, two angle grinders and other hand tools Various manufacturers and types Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 250 mm, weight approx.: 50 kg

Description: Consisting of 2 pieces Including an electric planer from the manufacturer MAKITA Type: 1900-B As well as a hand belt sander from the manufacturer AEG Approx. Onsite Dimension. (l x w x h): 400 x 300 x 150 mm, weight approx.: 20 kg

Description: Pallet truck hand - Dosed lowering of heavy loads - Low-maintenance hydraulic unit in steel design - Rounded fork tips for more safety when entering the pallet - Hard chrome-plated piston rod and overload valve - Swivel and load rollers with ball bearings, for easy running even under load Load capacity in kg 2500 kg Fork length1150 mm Lifting height min 85, max 200 mm Fork width 155 mm Total width 540 mm Number of wheels 2 front, 2 rear PU / Pu tires Fork tine (length x width x thickness) 1150 x 155 x 50 mm Machine weight approx. 0.068 t Dimensions L x W x H 1.5 x 0.54 x 1.21 m Approx. Onsite Dimension. (l x w x h): 1,500 x 540 x 1,210 mm, weight approx.: 68 kg

Description: Hand pallet truck 2000 kg capacity Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,300 mm, weight approx.: 120 kg

Description: Hand pallet truck 2000 kg capacity Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,300 mm, weight approx.: 120 kg

Description: Hand pallet truck 2000 kg capacity Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,300 mm, weight approx.: 120 kg

Description: Hand pallet truck 2000 kg capacity Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,300 mm, weight approx.: 120 kg

Description: Hand pallet truck 2000 kg capacity Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,300 mm, weight approx.: 120 kg

Description: Hand pallet truck 2000 kg capacity Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,300 mm, weight approx.: 120 kg

Description: Hand pallet truck 2000 kg capacity Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,300 mm, weight approx.: 120 kg

Description: Hand Pallet truck Fork dimensions 160 x 1140 mm / Total fork 530 x 1140 mm Approx. Onsite Dimension. (l x w x h): 1,600 x 530 x 1,200 mm, weight approx.: 75 kg

Description: Lot , of hand tools consisting of: PASLODE Impulse 350/90 battery nailer with spare parts Electric blade ,BTI profiline Approx. Onsite Dimension. (l x w x h): 800 x 800 x 800 mm, weight approx.: 10 kg

Description: • Hand-operated dovetailer, dovetailing machine • Max. Workpiece width approx. 250 mm • Milling template with 10 notches • Distance between notches approx. 25 mm • Motor power 0.55 KW-3000 rpm Approx. Onsite Dimension. (l x w x h): 620 x 620 x 1,250 mm, weight approx.: 80 kg

Description: • Hand pallet truck • Serial number 5099628 • Loading capacity 2000 kg • Fork dimensions 1150 x 540 mm • Maximum Height lift 190 mm Approx. Onsite Dimension. (l x w x h): 1,600 x 540 x 1,230 mm, weight approx.: 75 kg

pressure:2 t dayligth:80 mm Center of spindle to wall or column:100 mm weight of the machine ca.:0,5 t dimensions of the machine ca.:0,8 x 0,6 x 2,0 m Hand operated fly press, with center turning device appr. 100 x 400 mm length - Handwheel diameter 600 mm

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece

KHS-KISTERS Handle aplication Year: 2005 No. of case conveyor belt: 2pcs. Packaging capacity max.: 140pack/min Case dimensions: Min. package length: 65mm Max. package length: 350mm Min. package width: 65mm Max. package width: 400mm Height min.: 100mm Height max.: 360mm

ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.

Handheld control unit Schleicher type HGB 2P-0301 for Battenfeld

Available: immediately

Liebherr handling excavator in top condition with HD suspension, balloon tires, gelaendefaehig! Type 932 Litronic HD HD chassis Weight approx. 37,000kg Built in 2001 magnetic system, automatic levelling at discontinuation, boom 7m, stem 5m, Preheater for motor oil and hydraulic oil. Strong lifting force, e.g. mobile without settling over 10,000kg. technically very good condition. optional accessory (available at an additional cost): G3pdl8ila Quick-change system Shovel for earth movement Magnet or swivel magnet Gripper for scrap Clamp for round material such as baeums or pipes Transport mass: Width 3,000mm Length without sti-steal6,000mm Transport height 3,560mm Former new price approx. 890.000.-DM Special price

Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round and square Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base

Technische Daten: - Schnitttiefe 290 mm - Rad Durchmesser 204 mm - Sägeblatt Länge 1710 mm - Sägeblatt Breite 6-20 mm - stbile Führungsplatte - Motor 0,75 kW - Drehzahl 1410 U/min. - Spannung 230V / 50Hz - Schnittgeschwindigkeit von 900 m/min - Laufräder mit vulkanisierte Gummibandagen - stabile Konstruktion aus Aluminim - inklusive Sägeband mit gehärteten Zähnen - Gewicht 19 kg Einsatzgebiete: - Längs- und Querschnitte - Schweifen und Profilierungen - Kervenschnitte - Ausblattungen - Schifterschnitte

Handcuper Meinert PH6 for gate saws

Manufacturer Symbol Model MC9060-G (MC9000-G Series) RAM Memory 64 MB Form Pistol Operating System Windows CE .NET Display resolution 240 x 320 Scanner type Laser Data Collection Type Wireless Used in good condition with 4-fold charging station approx. 15 pieces available Against bid! Figure corresponds to the offered device! Picture shows an unused device, but the offered one is used! Illustration for information only! Special price

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg

Technical data: -maximum working width 750 mm -maximum material thickness approx. 1.0 mm -Beam + upper cheek fold away -Bending rail with cut-outs - space requirement approx. B 1000 x H 1100 x D 750 mm -Weight approx. 70 kg

Bosch Turbo Scara SR8 Robot + Control IQ200 Manufacturer: Bosch Order No. 3842999836 Serial No.3810198 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg + Control IQ 200 (Changes and errors in the technical data, information reserved!) Panning area see picture Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351

For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg

Henkellikator COMAG Power 100 + 100 Pack/min The machine is double lane

Handle applicator TWIN PACK Power: 40 Pack/min

DATA ON THE MACHINE Machine type: Handwheel Manufacturer: MAHO Model: CNC Condition: ready for use (used) Price 400 â?¬ FP net plus VAT Location Warstein , Germany Reference M-MAH-1119-6 Description We offer you a used handwheel from the manufacturer MAHO Nterv suitable for e.g. MAHO MH700 Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

2 rolls 1st role: Dimensions (x-y-z) mm: 1300x720x650 2. Role Dimensions (x-y-z) mm: 1500x400x650 Forks tiltable: Yes Max Weight: Kg: 400 Switch box + roller gears Total connection: 2.5 kW

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   Hydraulic drop end Digital read out position side rolls Pendent control position side rolls Rolling width:                 3000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  16mm Top Roll Ø:                    420mm Side roll Ø:                   405mm Number of rolls:               3 Rolling speed:                 6,5 Length:                        5800mm Width:                        &nbs ...

Make: WEGER Type: AL 96 Built: 1999 Power: 6700 m3/h Current consumption: 7.65 A 2 pieces Available Price on request Contact details can be found under Contact

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2014! (excellent condition). Standard column 2.000 mm tall with 470 mm extension. Designed for a maximum lifting load of 30 KG. Maximum radius 3.000 mm. Vertical stroke 1.800 mm. With console and special gripper for bags. Can be retro-fitted with a standard console for safety- or jerry-can hook at additional cost. Visible frame is for transport purposes only and not included (available at additional cost).

1 used pneumatic column-mounted handling manipulator (balancer), manufacturer Dalmec, type Partner PMC, built 2008 (excellent condition). Column 1,200 mm. Designed for max load capacity 20 KG. Working radius 3,100 mm. Vertical stroke 1,200 mm. With gripper with 4 suction cups and built-in vacuum generator. Visible frame is for transport purposes only and not included (available at additional cost).

Give. Angular handpiece with collet for key tension, wear-resistant cast housing, ball bearing, bevel gear, grease lubricated. Equipped with 6mm collet