hand used for sale

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg

PicoPac VM405 shell seal device for Assietten menu trays incl. heat tunnel NHG801 Sealers with two-hand control Operating the device without guard sewn-on prevents safety device on the protective cover of the press Allows remove fast and tool-less quick change facility of the pressing frame of all parts to clean the device E.g. Heating tunnel is equipped with propane gas burner (supplied with pressure reducer, but without gas cylinder) Burner has a pilot flame burner with brief interruptions to, turn back completely, and then again turn on without again having to light Adjustable chain belt speed Heating tunnel is height-adjustable and suitable for the connection to other devices Both devices must be cleaned thoroughly before operating, because dirty

BELDOS-Depositor BELLIFT 670 - exhibition machine, brand new condition, year of manufacture: 2020 - dosing range 5 - 670 ml capacity up to 120 deposits per minute 60 litre hopper in stainless steel pneumatic lifting and lowering of the hopper machine with wheels, two of them lockable machine completely in stainless steel hand gun with a set (6 pieces) decorative grommets other accessories on request

CARVING machine type ANDREONI STANDARD AL 12 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.12 spindles distance betwen spindles mm. 300 n.02 rotation speed of spindles rpm 12.000 / 18.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5100 x 3100 H=mm.1500 ( machine assembled )

Well-preserved horizontal pillow-pack packaging machine. Very well suited for cylindrical or other elongated products. Was used to extract a sausage in foil. Please see the video. Fully functional, there is some evidence of second-hand. Price on request machine is immediately available.

Three Roll Calender Manufacturer: Reed 24inch wide x 12inch diam. Right angle drive Double helical gears Hand nips Lunn Safety Gear Holroyd Gearbox Crompton Parkinson Motor Complete with Starter

<br>Collective chain &amp; investors 1 station hand feeding 6 Stehendbogenanleger Double and false sheet control Bulletin station 2 Heftk pfe Hohner Large of roller cleaning for 4 wire wheels 1 Three knife trimmer Media cutting device Band display<br><br>Still in operation: No.<br>Available: immediately

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

<br>Gathering machine Clamping element with manual installation 20 stations TO 803 20 Controls Wrong &amp; double sheet control Intermediate modules Installation element Hand system Adhesive Binder 20 pliers Vibration station Peace table Folding Anpre station S-FR and roughened station Popular B Hotmelt R ckenleimwerk Squeegee control Hotmelt side glue works Premelter Gauze station Scales cover feeder Groove Station 2 to 6 times Handling pressure Niederlegevorrichtung<br><br>Still in operation: No.<br>Available: immediately

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

FOR SALE SULZER ASV 25/30 ENGINE NEW GENUINE SPARE PARTS AT TURKEY HAVE A GOOD DAY SIR. WE HAVE MANY NEW GENUINE SPARE PARTS OF SULZER ASV 25/30 ENGINE AT OUR STOCK. WE VE 200 ITEMS AT OUR STOCK. PLS FIND 100 ITEMS WITH PARTS NUMBER ON BELOW. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US.. NO. ONE - SULZER 12 ASV 25/30 PART NO. 1 NEW CYLINDER LINER 5001001 1 PCS 2 NEW PISTON 3404001 4 PCS 3 NEW CAM SHAFT SECTION 10107001 3 PCS 4 NEW COMPLETE LUBRICATION PUMP 30004 K 1 PCS 5 RECON CONNECTING ROD 1 PC 6 NEW LOWER CRANK BEARING D = 225 MM 02103 B 7 PAIRS 7 NEW UPER CRANK BEARING D = 225 M 02103A 7 PAIRS 8 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 9 NEW THRUST BEARING HELPED 2103001 2 PAIRS 10 NEW BOLT WITH OVERSIZE 701007/0VERSIZE 12 PCS 11 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 12 NEW BEARING SHELL HELPED D = 194.5MM 03004B 511200- ...

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixer N.M. Holiness B.V.. spare parts Second-hand machine You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

New (second hand) pumps Centrifugal pump Ebara 2CDX_120-40 (photo 1): -400v -3 phase -3 kw -2900 rpm -Suction 1 1/4" PUMP TECHNICAL DATA • Maximum working pressure: 8 bar • Maximum temperature of the liquid: -5°C ÷ +60°C for standard and E version -5°C ÷ +110° for H-HS-HW-HSW version • G1½ suction connection for 2CDX 200, G1¼; for the rest of the range • G1 discharge connection 3SHS 50-125/3.0 centrifugal pumps close coupled (photo 2)

Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Rebuilt lathe. Distance between centers: 750mm. Swing over bed: 500mm. Swing over carriage: 220mm. Spindle nose: 40,5mm. Motor power: 10cv. Equipped with universal chuck of 250mm. CE Protections in chuck and carriage and CE european certificate for second hand machines. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. feeding device / work-piece-organizer Feldpausch OA 45-L manufacturer: Feldpausch type: OA 45-L manufacturer-series-nr.: 3/L year of construction: 1990 comm.-Nr.: 3990168/079 stock-nr.: 1445 + Regular Price: 2.950,- € > Reduced Price: 1.475,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) filling weight: ca. 100 kg filling volume: ca. 25 dm³ pot outer diameter: ca. 600 mm pot inner diameter: ca. 440 mm drive power: 220 V / 50 Hz power consumption: 550 VA protection class: IP 54 empty weight: ca. 120 kg standing area: W 750 x D 650 x H 950 – 1.250 mm color: greywhite / red Features vibr ...

Rebuilt lathe. Distance between centers: 1000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 1000mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 575mm. Swing over carriage: 300mm. Motor power: 12,5cv. Spindle nose: 51mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 2000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 3000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 1500mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 2000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 3000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

Qty. 1 Second-hand carousel baitec painting line Mfc.: Nordson Type: Sure Coat Built: 2002 Capacity: 150profiles/h Max. profile length: 7.0 m Qty. 10 electrostatic guns Capacity: 5 profiles inside oven

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 4000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Lathe - cycle VOJUS Turntec controlled 63 bearing no 1105-02244 make VOJUS type Turntec 63 built in 1999 State second-hand machine control CNC SIEMENS 840 D storage France origin SK delivery immediately cargo base EX WORK technical details turning diameter 630 mm turning length 3000 mm control SIEMENS 840 D spindle bore 110 mm spindle speeds infinitely 2500 revs/min rapid traverse - longitudinal/plan 10/5 m / min dimensions L W H 3000 x 1800 x 1790 mm turning diameter over support 420 mm overall power demand 26 kW machine weight approx. 4,5 t description CNC - control SIEMENS 840 D SHOP TURN MULTI FIXED HOLDER 1 open, revolving bezel TURNING DIAMETER OVER SLIDE 420 MM BED 6300 TURNING LENGTH 3000 MM 2500 U/MIN

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 5000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

NEMESIS 9000 are high-quality, modern, by INNOVATEST developed and produced hardness tester. These versatile machines combine groundbreaking technologies and extensive facilities in a machine body with a modern design. The basic function of the hardness concept is based on a settled on the test piece nose cone's mounted a turret with up to 8 positions. The desired hardness test method can be choiceed conveniently on the large touch screen monitor by means of Visual, intuitive user interface (control and evaluation software IMPRESSIONS. Now, the operator presses START and starts the automated testing: -automatically the turret swivels the correct Indentor / lens -using search drive, the specimen surface is contacted and focused (Vickers / Brinell) -now the impression generated power-regulated -then the integrated image analysis software automatically evaluates the impression of h ...

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 6000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 3000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Spare parts suitable for sacred V-mix, Nautamix, NAUTA -, Foeth mixer, Vrieco - cone mixer second-hand machine You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. Email: t.roechter@heiligbv

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 4000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 5000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Used stainless steel filter press made by Seitz, type 40/30, new 1983. Filtration area 2,88 m2. 18 plates 40/40 cm. Hand clamp. New 1983. Available 2 pcs.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 6000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Ladies and gentlemen, We are pleased to offer you a hand bagging machine. If necessary, we can send you pictures and specifications. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the  ...