hand used for sale

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

Offer 23093 Specifications: - Load capacity 2000 kg - Face plate diameter 1300 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1360 mm - Space requirement approx. W 1600 x D 2200 x H 1360 mm - Weight approx. 2.0 t

Second-hand machine - Year of construction 2005 Cleaned & functionally tested expected to be available from mid-September 2023 = only 2622 operating hours within approx. 18 years (as of 04.07.2023) This corresponds to a work performance - of only approx. 145 working hours per year or approx. 12 working hours per month! - with 3 hours of operation: less than 900 working days or 3 years in total = In the 4000 TR/G-S version, the Mini Rex has two different large stamping strips, whereby round-knitted with a machine, as well as angular/cushion-shaped dough pieces can be made. Features of the Mini Rex 4000 head machine: - Hourly output: 2,040 - 3,960 pcs at 17 - 33 strokes / min, infinitely variable - Built in 2005 - Extended product range with 2 weighing punches (round & square) - Best effective results via infinitely adjustable active eccentric - with dough hopper and ...

Offer 23207 Specifications: - Load capacity 2500 kg - Face plate dimensions 750 x 750 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1090 mm - Space requirement approx. W 1150 x D 1250 x H 1090 mm - Weight approx. 1.2 t

3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...

Butterfly valve, intermediate damper, flange housing, with hand lever XOMOX CRANE Series 7500 DN 150 PN 16 width: 56 mm bolt circle diameter (housing): Ø 240 mm, 8x threaded hole: M20 x 2,, 5 ( continuous ) material housing: EN-GJS-400-15 ( GGG40 ) material disc: Stainless steel ( 1.4408 ) Drive shaft: 17 x 17 mm, Shaft length: 19 mm Drive flange: Ø 55 / 92 mm, bolt circle diameter: Ø 70 mm, 4x bore: Ø 9.0 mm New ! Dimensions ( without hand lever ): 350 x 280 x 95 mm

Butterfly valve, intermediate damper, flange housing, with hand lever XOMOX CRANE Series 7500 DN 100 PN 16 width: 52 mm bolt circle diameter (housing): Ø 180 mm, 8x threaded hole: M16 x 2,0 ( continuous ) material housing: EN-GJS-400-15 ( GGG40 ) material disc: Stainless steel ( 1.4408 ) drive shaft: 14 x 14 mm, shaft length: 16 mm drive flange: Ø 35 / 67 mm, bolt circle diameter: Ø 50 mm, 4x bore: Ø 7.0 mm New ! Dimensions ( without hand lever ): 290 x 220 x 70 mm

Butterfly valve, intermediate damper, flange housing, with hand lever XOMOX CRANE Series 7500 DN 80 PN 16 width: 47 mm bolt circle diameter (housing): Ø 160 mm, 8x threaded hole: M16 x 2,0 ( continuous ) Material housing: EN-GJS-400-15 ( GGG40 ) material disc: Stainless steel ( 1.4408 ) drive shaft: 14 x 14 mm, shaft length: 16 mm drive flange: Ø 35 / 67 mm, bolt circle diameter: Ø 50 mm, 4x bore: Ø 7.0 mm New ! Dimensions ( without hand lever ): 260 x 180 x 70 mm

Accessory set for hand press pliers, interchangeable press jaws WMW PZ 60.1-U Content: 17 x press jaw pair 2 x cutting jaw pair suitable hand press pliers: W324 in metal case used, tested ! Dimensions: 450 x 200 x 55 mm

bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M42 throat: 360 mm bore stroke: 200 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4 mm/U spindle turning speed range: 190 - 1900 U/min column diameter: 175 mm table surface area: 550 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Sca ...

: gebraucht : 1997 : 8250 : Türkei : 22500 € : 1 : 120 to : 3100 mm : 180 mm : 2550 mm : 240 mm : 320 mm : 170 mm : 11 kW : 3500 mm : 1450 mm : 2270 mm : 7200 kg : 600 mm : 53 mm/s : 10 mm/s : 80 mm/s : 3100 mm With 2-hand and foot control panel Motorised backgauge adjustment 600 mm via +/- push-button with mechanical reading and manual fine adjustment at the front Motorised press depth adjustment via +/- button with digital display 2 backgauge fingers 2 table support arms Foot &, two-hand control Side &, rear safety fairing New Multi V Die 3100 x 90 x 90 mm 7V Openings 9/13/16/20/30/35/56mm cranked upper tool 3100x110x25mm 86°, new grinded User Manual German + EG Declaration of conformity COMPLIES WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the picking rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 07 pcs. Note: The advantage at a packaging table or at a Picking rack is that has all the tools needed & accessory materials used to create the product are always at hand. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts Weight / pcs.: approx. 5,50 kg The stands are pre-assembled 1,200 mm high 610 mm deep 07x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly  ...

Leistung: 80 Siphon/Flaschen/Std. Anlage bestehend aus: • Reinigungsmaschine für Glasflaschen bis zu einer Größe von 2 Litern (u.a. Biersiphone) • Reinigungskabine mit Klappdeckel in Edelstahl (Werkst. Nr. 1.4301) • Kombinierte Innen- und Außenreinigung • integrierterer, dampf- oder elektro-beheizter Reinigungsmittelbehälter • Edelstahlpumpe über Siebkasten ansaugend • kolbengesteuerte Medienventile in Edelstahlausführung • komplett verkabelter, an der Maschine installierter Steuerschrank • Steuerung über Zeitrelais und Steuerschütze • automatischer Programmablauf • alle einzelnen Waschzeiten sind von Hand individuell einstellbar • Trennung von Wasser und Lauge im Ablauf über pneumatisch betätigte Trennklappe • spezielles Etikettensieb im Ablaufbereich More then 300 machines new and second hand on our seema .de

Technical data for the picking rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 08 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts Weight / pcs.: approx. 5,50 kg The stands are pre-assembled 1,200 mm high 610 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 04x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 08x Rack trusses, used Total length ...

Manufacturer: Jago Lochreihenbohrmaschine, Type: B29PN, Year: 1992, Control: hand, Drilling engine kW: ca.1,5, Working range max mm: 60, Drilling support horizontal: 1, Drilling beams: 1, Drilling beam swivel-mounted: yes, Number of drill spindles: ca.27, Lochraster: 32, Swivel pneumatically 90-45°: hand, Foot switch: yes, Max. drilling depth in mm: 60, Year :1992

Manufacturer: KBM Kantenschleifmaschine, Type: KBM 3200, Year: 2013, Control: hand, Control: hand, Roller diameter D mm: ca.120, Table stop mm: ca.900, Sanding area (beam): yes, Sanding belt width max mm: 150, Sanding belt length max mm: ca.3200, Sanding unit slewable up to 45°: yes, Schleifbandgeschwindigkeit min-max m/sec: 2 Stufig, Sanding belt dimensions mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Year :2013

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Bauerrischter, Type: KSK 92, Year: ca.1997, Control: hand, Monting of the machine: 1 Schleiband, Control: hand, Sanding belt hight: 60, Table length: ca.2000, Slewable sanding head: yes, Table stop mm: yes, Sanding area (beam): 60, Sanding belt width max mm: 2000 X 60, Sanding belt length max mm: 2000, Work piece hight min-max mm: 50, Feeding speed min-max m/min: 5-15, 1 Schleifmotor kW: ca.1,5, Sanding unit slewable up to 45°: 90-45, Suited for lacquer sanding: yes, Year :ca.1997

Manufacturer: Brandt, Type: KTD 72, Year: 2002, Control: yes, Glue application: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Edgeband thickness max mm: 3, Thickness of coiled edgeband max mm: 3, Feeding speed max m/min: hand, Thickness of coiled edgeband max mm: 3, Inner circle min mm: yes, Total power kW: 8, Feeding speed max m/min: hand, Compressed air bar: 6, Wight approx. kg: 300, Required space L x W x H mm: 1500 x 1500 x1200, Year :2002

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

pressure: 100 t throat: 300 mm stroke: 20 - 128 mm ram - range of adjustment: 80 mm strokes per minute: 60 - 90 table surface area: 920 x 600 mm ram surface: 540 x 290 mm hole in the table: 315 x 180 mm daylight, max. stroke above - ram adjustment above: 520 mm tool hole in ram: Dm. 50 mm total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 1,8 x 1,7 x 2,2 m Furnishing: - Gear transmission - fixed table - Triple bearing shaft - semi-automatic stroke adjustment - hydraulic clutch-brake combination - hydraulic overload (modern unit mounted on the stand on the left) - Hydraulic unit with oil cooler for clutch mounted on the left side of the stand - Ball spindle adjustment using a ratchet - automatic central lubrication VOGEL - Operating instructions / CE declaration available Machine is partially overhauled in our company as follows: - dismantled, clea ...

Cutting width at width stop: 640 mm; Cutting depth: 120 mm; Height adjustment saw blade: lever; Saw blade swivel adjustment: lever; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Length ruler display: -; Saw blade diameter: 400mm; RPMs: 1; Motor power: 2.8 kW; Engine braking: yes, automatic; Suction port: 100mm; including boom set: yes; Machine length: 1350mm; Table extension: 1100mm; Machine width: 1180mm; Weight: 131kg; DESCRIPTION saw blade can be swivelled up to 45Â and rotated up to 90 inclination of the saw unit via hand lever and scale guidance of the saw unit for cross-cut cuts from bottom to top via a lever Suitable for creating throat and burr rafters as well as eaves and wedge planks Rip fence with scale Saw blade protection hood and working unit with suction connection 100 mm Tool bo ...

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

? Suitable for homogenising for aqueous products. ? Viscosity 100 mPas, density 900 - 1,100 kg/m3 ? Speeds 77-769 rpm ? Power 0.05 - 0.55 kW ? 2-bladed trapezoidal agitator diam. 210 mm, shaft length 800 mm ? Parts in contact with product shaft and stirring element made of mild steel St. 37, coated Halar E-CTFE (equivalent to PTFE) ? Equipped for 300 l drum, diam. 750 mm, height 800 mm (drum not included) ? Agitator height adjustable by hand crank ? Lifting height from lower edge of agitator bottom 450 - 1,050 mm ? Agitator can be tilted by hand crank ? Drive 400V/50Hz

Format 210 x 300 mm, mechanically 10 t punching pressure, with heating, automatic roll unwinding and rewinding, two-hand indentation, stroke: 40 mm, with film feed single, motor-driven, adjustable via adding preset counter, hand-operated sliding table, adjustable from front to back, cliché holding plate without closing frame, foil cooling device

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Travel path: manual X//Y 230/80 mm -Stop depths: see photos -Workpiece clamping: pneumatic -Coolant device -Dimensions: 600/520/H1280 mm -Weight: 111 kg with pallet

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine shears -Guillotine scissors: hand guillotine scissors, solid design -Cutting width: 1030 mm -Max. Section thickness: approx. 2.0 mm -Fence depth: 550 mm, fence with removable rail -Dimension: 2250/870/H1295 mm -Transport dimension: 1670/870/H1110 mm -Weight: 414 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, drawbar complete with drive from electric hand pallet truck -Drive motor: Type T 12 24 V -Delivery/price: complete -Dimensions: 1200/440/H290 mm -Weight: 46 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Stier, drawbar complete with drive from electric hand pallet truck SPT-15 -Drive motor: 24 VDC / 750 W -Delivery/price: complete -Dimensions: 1350/380/H355 mm -Weight: 44 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine -guillotine scissors: hand guillotine cutting width: 1060 mm -Type: unfortunately without type designation/cutting data -Cutting width: 1070 mm -Max. Section thickness: mm -Stop depth: 435 mm -Total dimensions: 1760/890/H900 mm -Weight: approx. 161 kg

Router, router, hand router, edge router -Manufacturer: Scheer, hand router type HM 6 -Speed: 18000 rpm - Depth stop -Rated consumption: 650 watts - Connection: 220 volts -built-in collet: Ø 6 mm -Dimension: 460/190/H230 mm -Weight: 4.1kg

Hand shift, throttle grip, throttle lever, driving lever, control lever, direction lever -Hand transmission: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190mm -Weight: 1.4kg

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm -Milling stroke: 45 mm -Motor: 220/380V 740W -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm -Weight: 108kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -For machining: of aluminum and steel profiles -with 1 vertical and 1 horizontal milling motor -per motor: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -ransport dimensions 800/1200/H1630 mm -Weight: 270 kg

Gas cylinder cart, gas cylinder cart, steel cylinder cart, gas cylinder stair cart, stair hand truck -Manufacturer: Fedor Ulisch, stair hand truck with a wide shovel -Pipe frame: stable design with locking lever -Dimensions: 670/530/H1215 mm -Weight: 30 kg

Punch, pneumatic punch, punching machine, punching device, hole punching machine, pneumatic hand punch -Manufacturer: DE-STA-CO, pneumatic hand punch -Type: 040 0210 -Stamp: Ø 2.5 mm -Projection: 15 mm -Dimensions: 190/200/H510 mm -Weight: 24 kg

hydraulic unit, hydraulic pump, hydraulic pump -Hydraulic unit comes: from a 15 t lifting platform -Max. Pressure: 130 bars -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: emergency hand pump, hand valve, electric valve, emergency lowering, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Hand terminal, hand control device, control unit, control panel, control panel, control unit -Siemens Simatic S5 -OP 393 III -6ES5393-OUA15 -Protection class: IP 50 -including installation frame: 6ES5 982-3UA11 -Dimensions: 148/320/H55 mm -Weight: 0.7 kg

pressure: 50 t throat: 245 mm stroke: 14 / 90 mm ram adjustment: 75 mm table height adjustment: 150 mm strokes per minute: 42/85 table surface area: 700 x 490 mm ram surface: 400 x 230 mm tool hole in ram: 40 mm total power requirement: 4 kW weight of the machine ca.: 3,41 t dimensions of the machine ca.: 0,8 x 1,75 x 2,1 m Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23401 Specifications: - Table size vertical: 800 x 220 mm - Angle table 800 x 395 mm - Working range of axes - X (longitudinal) Autom. / Hand 630 / 650 mm - Y (landscape) Autom. / Hand 430 / 450 mm - Z (vertical) 400 / 420 mm - min. / max. distance milling spindle – table surface approx. 10 - 430 mm - Tool holder ISO 40 - 12 working spindle speeds 45 - 2000 rpm - Feed rates X ; Y ; Z infinitely variable 10 - 4500 mm/min - Drive spindle 400 V / 4.0 kW - Space requirement approx. W 2450 x H 1850 x D 2470 mm - Weight approx. 1500 kg - With: - Movable vertical milling head with drill quill - Vertical milling head can be swivelled left + right - Handwheels for X ; Y ; Z - Axes - Control HEIDENHAIN TNC 135 - Coolant device - Hydr. Machine Vise

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm spindle taper ISO: 40 DIN 69871A spindle turning speed range: 50 - 4000 U/min table-size: 800 x 400 mm table load: 400 kg feeds -stepless-: max. 2000 mm/min rapid traverse: 5 / 4 m/min power capacity - milling spindle: (S1) 10,5 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 17,5 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,00 x 2,76 x 2,05 m - Fabr.No.: 90082 - perfect condition from educational institution - Digital Read Out System Heidenhain ND780 - electronic hand wheel - mechanical hand wheels - cont. variable spindle speeds - cont. variable feed rates - horizontal milling spindle - drilling quill - Coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

The U2PRW mitre and drill is designed for processing slats and furniture fronts made of solid wood or MDF. The machine tool operates in a semi-automatic cycle. During one cycle, the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in a jammed plane or edge of the element. – made in Poland TECHNICAL PARAMETERS: Max. height of the material to be cut: 60 mm Max. width of the material to be cut at an angle of 45° 70 mm Max. material width at 90° 150 mm Max. length of cut material 2200 mm Min. length of cut material at 45° 455 mm main saw diameter 250 or 300 mm scoring diameter 100 mm Max. bottom cutter diameter 35 mm Max. bottom milling depth 15 mm seating diameter of face drills and bottom milling cutter 10 mm Drill head (face drilling): 4 spindles spindle axial spacing 32 ; 32 ; 40 mm Linear spindle system Max. face d ...

Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...

pressure: 10 t throat: 235 mm stroke: ca. 400 mm stroke speed - idle stroke downwards: 4,5 m/min stroke speed - idle stroke upwards: 10 m/min dayligth: ca. 500/600 mm table-size: ca. 450 x 400 mm ram hole: 32 mm total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 0,95 x 0,45 x 2,1 m Condition: ready for operation: Condition: geometric overhauled: Video available on our website.: Electric 380 Volt: With elect. two-hand control through: separate console: Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! The stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with Mo ...

Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm -Pitch: 48 mm/rev. -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Hand Feeding Covering Material, Hand Feeding Hard Spine Insert, Automatic Cardboard Feeding, Automatic Soft Spine Insert Feeding From Roll, Hot Glue, Format: Max. 530x400mm, Min. 110x155mm, Speed: Max. 15 Cycles/Min.