hamme used for sale

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

100 mm diameter pile driver suitable for Hammer HM100

Replacement tooth suitable for Hammer RH25 demolition pulverizer

General SKU435X1379 LocationBarneveld Main Features Motor7.5 KW Width340 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills Hammer millcheck Moving hammers24 Hammer width20 mm With sieve cagecheck Housing dimensions 340 x 500 mm With hoppercheck Inlet340 mm Motor7,5 kW (400 V, 1470 rpm) With variable speed drivecheck Speed882—1764 rpm Information MakeJehmlich GmbH Nossen SerialK190430 TypeHM 341 Year of construction2018 Mounted on framecheck With switchcheck With switchgearcheck Floor space1,45x0,62 m Total height1,95 m Weight600 kg Extra SpecificationsMax capacity up to 20 t/h.Hammer MillsJehmlich GmbH NossenMills > Hammer MillsBrand > Jehmlich GmbH Nossen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel Information TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith: dust filter AZO blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm Hammer MillsNew arrivalsHosokawa AlpineMills > Hammer MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU351W929 LocationBarneveld MakeAubema Main Features Motor18.5 KW Width200 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills Hammer millcheck Rotor size340 mm Grinding room size200 x 600 mm Moving hammerscheck Hammer width190 mm With grinding platenscheck With hoppercheck Inlet200x300 mm Motor18,5 kW, 380/660 volt, 1460 rpm Speedinvullen Information Type2506/2 No.8227 Year of construction1993 Mounted on framecheck With switchcheck Floor space2,6 x 1,1 m Total height2,5 m Weight1000 kg Technical specs Extra informationOutput: 200 x 900 mmHammer MillsAubemaMills > Hammer MillsBrand > Aubema What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU219Y069 MakeEuromilling Serial9995357 TypeAD 750 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter100 mm Width100 mm Specified Features - Hammer Mill MaterialMild steel, Stainless steel 1.4301 (304) Hammer Mills Hammer millcheck Grinding room sizeø 235 mm Moving hammers14x Hammer width20 mm With sieve cagecheck Housing dimensions ø 235 mm Inlet100 x 70 mm Motor1,1 kW (400 V, 2855 rpm) Speed2855 rpm Information LocationBarneveld With switchcheck Floor space0,80 x 0,60 m Total height1,20 m Weight40 kgHammer MillsEuromillingMills > Hammer MillsBrand > Euromilling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Hammer Mills Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cagecheck 2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Information TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Mounted on framecheck With switchcheck With switchgearcheck Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a ...

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

With magnet

HDP 143 1400 bar 53 litre per minute

High-pressure pump - see pictures

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Screws and small part scoop Brand: Hammer Type: SKP-M-300 Other details: Please see photos All information without guarantee

NEW, suitable for Martin HB100, Year of construction: 2019

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min. Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3 motor AH 250 M-4; 400V; 50 Hz Dimensions LxWxH: approx. 1665x1212x1641 mm Weight: approx. 1050 kg Built: 2008 Condition: in very good used condition. Includes complete documentation.

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.

Manufacturer: Hämmerle Type: TRM 50/750 Year of construction: 1990/ 2023 Overhauled: 2023 Sheet width: Max. 750 mm Sheet thickness: approx. 0.5-12 mm Part length in flow direction: min. approx. 100mm Feed speed: 2-20 m/min Number of straightening rollers: 19 pcs Diameter: 50mm Workpiece inlet height: 900mm Power requirement: 31kW Total weight: approx. 10.000kg

High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t

Year 2004 17000 hours Very good condition Find more here - / Contact us at -

For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. Less than 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.

Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t

For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.

Hammer C3-31 5-speed station wagon Year of construction 2024 With sliding table 2000mm Boom table 1100 with telescopic Length stop 1200mm swivel -45° 400V 3 kW (4 HP) 3 motors Degree Grid Index System Saw blade 250-315mm (without saw blade) Cutting height of 100mm Swivel: 90°-45° Parallel cutting width of 600mm Planing width of 310mm Planing fence can be swivelled 90° to 45° Dressing table length of 1400mm 3 Knife Automatic Planing Shaft Passage height from 4-225mm Thickness table length of 540mm Milling machine: 90° rigid Milling machine: 3000/6000/8000 and 10000 rpm Useful height 100mm Weight approx. 550 kg G&2992-o1852

engine: diesel engine Cummins B6.7 - Stage 5 (AdBlue) power: approx. 209 kW / 280 hp shafts with 7/7 discs with 5 knives per discs & breaker bar with combs Mobile Hook Lift Frame wheel axle with drawbar hydraulic height adjustment for magnet hydraulic height adjustment for discharge belt water sprinkling system Monitoring Industry 4.0 weight: approx. 20 t

Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.

Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.

pressure: 100 t chamfer lenght: 2050 mm total power requirement: 11 kW weight of the machine ca.: 5,9 t dimensions of the machine ca.: m - ram adjustment: 150 mm - distance ram to table: 400 mm - stroke: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electric shears for metal sheets

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

Year of Make: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Projection: 250 mm Weight: 18,900 kg + Tools

Manufacturing year : 1992/93 BAR: 1500 KW: 450 RPM: 305 l/min: 150

BAR: 1500 l/min: 71 KW: 230

BAR : 1500 l/min : 52 KW: 160

BAR : 1500-2150 l/min: 19 kw: 102

Hammer pile driver suitable for HM500 with 120 mm inner diameter, photos are only an example !

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock