hamm used for sale

Operating pressure: 500 bar, Year of construction 2019 Flow rate: 15 l/min, hot water, Drive: Deutz Diesel 15 kW, Operating hours: approx.: 195 h, Trailer incl. accessories, HD pistol + lance

Band saw Hammer 4400, very good condition, 1.5 kW, approx. 110 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, year 2005, 1800 mm table length, 3 knives, 400 kgPrices subject to change, errors, printing and typesetting errors excepted

Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.

AD planing machine Hammer A3-41, very good condition, year 2023, 4 kW motor power, 1800 mm table length, 410 mm table width, incl. spiral planer shaft, 230 mm thickness planerPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, year 2001, less good condition, incl. driving device, impeller is worn, 4 kW S6, 1700 mm table length, 410 mm table width, 3 knives, 360 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, built in 2019, very good condition, incl. reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 knives, 350 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, good conditionPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, year 2018, very good condition, very little used, 310mm planing width, incl. 1 set of replacement knives (reversible knife), 3 kW, 3 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

4-fold combi hammer C3-31, standard equipment, 2000 mm table length, 3 knives, approx. 450 kgPrices subject to change, errors, printing and typesetting errors excepted

Format circular saw milling machine Hammer B3 Winner, year 2023, same as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kgPrices subject to change, errors, printing and typesetting errors excepted

Sliding table saw milling machine Hammer B3 Perform, very good condition, 4 kW, 2500 mm Format table lengthPrices subject to change, errors, printing and typesetting errors excepted

WOMA 325 Z P30 high-pressure system – 1000 bar – replacement engine Scania – ready for use For sale is a WOMA 325 Z P30 high-pressure plunger pump, installed in a MAN vehicle. The system is 100% operational, technically and visually very well maintained. The machine is equipped with a Scania DS11 replacement engine (see nameplate). Robust, proven technology – ideal for demanding industrial cleaning jobs. The replacement engine was inspected and completed by Scania, including a new intercooler. The engine replacement was carried out in February/March 2019 . Technical data: Pump manufacturer: WOMA Type: 325 Z P30 Max. operating pressure: 1,010 bar Flow rate: 134 l/min Speed: 1,800 rpm Plunger Ø: 30 mm Power consumption: approx. 230 kW Drive: Scania Replacement Engine (DS11) Installation: MAN vehicle Operating hours: approx. 13,6 ...

This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information.

pressure: t chamfer lenght: mm distance between columns: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU435X1379 LocationBarneveld Main Features Motor7.5 KW Width340 mm Specified Features - Hammer Mill Hammer millcheck Moving hammers24 Hammer width20 mm With sieve cagecheck Housing dimensions 340 x 500 mm Inlet340 mm Motor7,5 kW (400 V, 1470 rpm) With variable speed drivecheck Speed882—1764 rpm Hammer Mills MaterialMild steel General MakeJehmlich GmbH Nossen SerialK190430 TypeHM 341 Year of construction2018 Mounted on framecheck With switchcheck With switchgear(as is) Floor space1,45x0,62 m Total height1,95 m Weight600 kg Extra SpecificationsMax capacity up to 20 t/h.Consumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicJehmlich GmbH NossenIndustries > Recycling > Consumer wasteMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustrie ...

General SKU364X867 MakeHosokawa Alpine TypeMP2-W No.P1 187094 /4050 Year of construction2013 Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel General Mounted on framecheck LocationBarneveld Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg CEcheck Extra SpecificationsWith:dust filter AZOblower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpmhopper with gear motor: 0.2 kW, 2730 rpmConsumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicHosokawa AlpineIndustrie ...

General SKU351W929 LocationBarneveld MakeAubema Main Features Motor18.5 KW Width200 mm Specified Features - Hammer Mill Hammer millcheck Rotor size340 mm Grinding room size200 x 600 mm Moving hammerscheck Hammer width190 mm With grinding platenscheck With hoppercheck Inlet200x300 mm Motor18,5 kW, 380/660 volt, 1460 rpm Speedinvullen Hammer Mills MaterialMild steel General Type2506/2 No.8227 Year of construction1993 Mounted on framecheck With switchcheck Floor space2,6 x 1,1 m Total height2,5 m Weight1000 kg Technical specs Extra informationOutput: 200 x 900 mmConsumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicAubemaIndustries > Recycling > Consumer wasteMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additives ...

model: VB 750 D, Serial number: 110/667, Construction year: 11/2008, drive: diesel, engine speed: approx. 2,100 RPM, operating hours: 6.090 h, State: Used, operational, Availability: immediately, Working length: 2.000 mm, Total length of the shafts: 2.348 mm, length: approx. 7,500 mm, width: about 2,500 mm, height: about 3,000 mm, own weight: approx. 20 t, Motortyp: 2.348 mm

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - .ucymachines/ Contact us at - sales@ucymachines

Press brake manufactured in 2007. This Bystronic Hammerle 225 3P 4100 features a pressing force of 2250 kN and a bending length of 4100 mm. The machine includes hydraulic die and punch clamping systems, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the Bystronic Hammerle 225 3P 4100 machine we have for sale. Contact us for further details regarding this machine.

• Brand: MUTTON, • Model: VB 750 D, • Year of construction: 2001, • Drive: diesel, • engine speed: approx. 2,100 rpm, • Condition: Used, operational, • Availability: immediately, • Working length: 2,000 mm, • Total shaft length: 2,348 mm, • Engine speed: approx. 2,100 rpm, • Length: approx. 7,500 mm, • Width: approx. 2,500 mm, • Height: approx. 3,000 mm, • Weight: approx. 20 t

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm With jacketcheck Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) General Floor space1,7x0,7 m Total height1,2 m Weight800 KgConsumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsDiscountE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicEngelsmannIndustries > Recycling > Consumer wasteMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > OrganicsDiscountIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Oth ...

The machine is in perfect condition

Manufacturer: Hammel Model: VB 950 DK NR 60 Year of Manufacture: June 2008 Weight: approx. 42 tons Operating Hours: approx. 6,000 hours Configuration: Mobile on crawler undercarriage Paint Finish: RAL 3020 (red) Refurbished: 2025 Refurbishment Work Carried Out in 2025 - New main gearbox installed - Hydraulics replaced (except main pumps) - Full hydraulic system flush completed - Tank cleaned and all oils changed - Fuel filter replaced - Partially repainted Drive / Engine - Engine: Caterpillar C-18 - Power Output: 522 kW / 710 PS - Idle Speed: approx. 700 min-1 - Working Speed: approx. 1,900 min-1 - On-Board Voltage: 24 V Shredding Shafts - Rotor Diameter: approx. 870 mm - Shaft Configuration: 6-part, 8/8 discs (waste/bulk) - Working Width: 2,445 mm - Shaft Speed (automatic mode, no load): approx. 36 min-1 Discharge Conveyor - Belt Width: 1,400 mm - Belt Type: Cleat belt, s ...

General SKU027E101 MakeApex Construction Ltd. Type114 DW-SF No.A-40880 Year of constructionunknown Mounted on framecheck Main Features Motor22 KW Inlet diameter260 mm Width295 mm Specified Features - Hammer Mill Hammer millComminuting mill Rotor sizeø 260 x 295 mm Fixed hammerscheck With sieve cage2x pore size 1.25 mm: 1x 1.75 mm Inletfeeding through twin screw metering screw Motor22,0/30,0 kW 380/660 V 1470 rpm Speed750 rpm Hammer Mills Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace2,0x1,3 m Floor space2,0x1,3 m Total height2,4 m Weight1100 kg Extra SpecificationsDouble Dosing ScrewMotor 0.55 kWGearbox output 5.7 – 34 rpm (manual variator)Dosing screw capacity: maximum 4.5 m³/hConsumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsDisc ...

General SKU356W956 MakeBühler TypeDFZH-2 No.10267697 Year of construction1996 Main Features Motor185 KW Width850 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia. 780 x 120 mm (2x) Grinding room sizeDia. 850 x 160 mm (2x) Moving hammerscheck Hammer width7 mm With sieve cage3,5 mm (3x), 4 mm (3x), 5 mm (2x) With hopper(outlet hopper, outlet size 200 x 200 mm) Inlet320 x 200 mm Motor2x 90 kW (380 volt, 2966 rpm) Speed2966 rpm Hammer Mills MaterialMild steel General Mounted on framecheck LocationBarneveld Floor space2,40 x 1,70 m Total height4,3 m Weight3500 kg Extra Specificationsinlet with dosing unit. Buhler Type: DFAT-2with fan, type: FXH 15.06 spez ALSfan motor: 2,2kW, 400VConsumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberNew arrivalsMinerals & inorganicB ...

HAMMELMANN HDP 124 Twin Unit Integration of 2 x Hammelmann HDP 124 high-pressure pumps Technical data: Manufacturer: Hammelmann GmbH, Germany Type: Twin Unit with 2 x HDP 124 Year of Make: 2013 Machine numbers: B3.01124.xxxx and B3.01124.xxxx Working pressure: 2 x 2,500 bar Max. flow rate: 2 x 24 l/min Piston Diameter: P17.5 Engines: 2 x DEUTZ TCD 2012 L06 2V, Stage 3 Engine power: 2 x 129 kW at 2,150 rpm Diesel consumption: approx. 45–70 l/h Tank capacity: approx. 900 litres Noise emission: LWA = 110 dB Water connection: Express coupling Minimum water pressure: approx. 3 bar Required water volume: approx. 2 m³/h Dimensions: approx. 11.05 m x 2.60 m x 4.50 m Weight: approx. 11,750 kg Built on: DAF 75.250 4x2 truck, 250 hp, 19 t box body Aquajet 12 – n°01 – year 2013 2450bar – 24l/min Engine Deutz 5 919h Pump 3 723h Aquajet 12 – n°02 – yea ...

Code: 0404 Brand: HAMMER - FELDER GROUP Model: A3 - 31 - CE Standard 2-works combined machine (Surface Planer/Thickness planer ) for joinery, furniture, joinery fittings, custom-made furniture, plastic and various – CE Standard Technical specifications: Planer width 310 mm Table length 1400 mm Tilting guide 90-45° Three-phase motor v. 380 4 Hp Planer shaft with 3 knives Max chip removal 4 mm Thickness table width 306 mm Thickness table length 540 mm Min workpiece length 145 mm Thickness feed speed 6 mt/min Suction inlet diameter 120 mm Overall dimensions mm 1450 x 600 x 1000 h Weight kg 290

A hydraulic CNC press brake Hämmerle (M+S Brugg AG) is available. Press force: 2000kN, max. working length: 3100mm, max. stroke: 400mm, max. throat depth: 250mm, frame distance: 3240mm, max. opening width: 965mm, max. sheet thickness: 8mm. Machine dimensions X/Y/Z: approx. 4400mm/2700mm/3400mm, weight: approx. 16600kg, control system: CNC Infinitron. Documentation available. An on-site inspection is possible.

The trailer delivered with all necessary equipment installed, such as 2000l watertank and 1800l fuel tank. No accessories. The trailer has a valid TÜV / MOT approval. Performance: 2 x HAMMELMANN HDP 170 units with 2 x pressure steps: 1- 2900bar 29l/min 2 - 3000bar 27l/min Diesel Engine = Caterpillar 3126B ATAAC The units has always been maintained as they should. The units are running and performing as they should. Sold without any warranty.

For sale: Hammelmann HDP 72 High Pressure Pump ✅ Year of manufacture: 2016 ✅ Operating pressure: 440 bar ✅ Flow rate: 81 l/min ✅ Piston diameter: 35 mm ✅ Speed: 1,500 rpm ✅ Never used – in excellent condition Location: Oerlinghausen, Germany Please contact me for more information

Code: 0464 Brand: HAMMER - FELDER GROUP Model: N 3800 - CE Standard Band saw for cutting wood, plastics, composite materials and various - CE Standard Single-phase motor v. 220 - Kw 1,5 Flywheel diameter 380 mm Cutting height 310 mm Tiltable cast iron table -5/+45° Table dimensions 400 x 510 mm Roller guides above and below the table Blade length 3556 mm N° 2 blades supplied User manual Overall dimensions mm 700 x 600 x 1700 h

Code: 0469 Brand: HAMMER - FELDER - AUSTRIA Model: C 3 31 - CE Standard Universal 5-works combined machine - CE Standard Planer width 310 mm Table length 1400 mm Helical planer spindle Sylent Power” with reversible blades Thickness height 225 mm Circular saw unit tiltable 0-45° Cutting height 103 mm Scoring unit Aluminium carriage 2000 mm Spindle moulder unit diameter 30 mm – 4 speeds Motor power 4 Hp

Code: 0470 Brand: HAMMER - FELDER - AUSTRIA Model: A 2 - 26 - CE Standard 2-Works combined machine (surface planer /thickness planer ) – CE Standard Single-phase motor Planer table width 260 mm Thickness height 184 mm Tilting planer guide Max chip removal 3 mm Wheels on the base

pressure: 100 t chamfer lenght: 2050 mm total power requirement: 11 kW weight of the machine ca.: 5,9 t dimensions of the machine ca.: m - ram adjustment: 150 mm - distance ram to table: 400 mm - stroke: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BYSTRONIC Hämmerle 3P130 ist eine CNC Abkantpresse, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Druckleistung 1300 kN, Biegelänge max 3100 mm, Hub 400 mm, Ausladung 250 mm, Einbauhöhe 917 mm, Arbeitsgeschwindigkeit 1–10 mm/s. Technische Daten: Anschluss 3x400 V 50 Hz, Steuerspannung 24 V, Motorleistung 19 kW, installierte Leistung 27 kW, Gewicht ca. 14.200 kg, Ölbehälter 300 l; Abmessungen L4435×B2734×H3095 mm. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Werkzeugmaschinen, Medizintechnik. Technische Daten ohne Gewähr

Key data: 310 mm, 240 mm, 3 kW

400 V, 50 Hz, 3.0 Kw, 6.2 A, Spiral knife shaft 310 mm, Chip removal 4 mm, Feed rate 6m/min, manually switchable, Height adjustment manually, Thickness table 630x310 mm., Dressing table left 630x310 mm, Dressing table right 730x310 mm, Dressing stop swivels 45 °, Suction nozzle 120 mm

General SKU291Y468 MakeHosokawa Alpine TypeOmniplex 40/32HA LocationBarneveld Main Features Motor15 KW Width335 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeø 260 x 300 mm Moving hammers18 Hammer width125 mm Without sieve cagecheck Housing dimensions 520 x 310 mm Inlet335 x 155 mm Motor15 kW (380 V 1460 rpm) General Floor space0,80 x 0,75 m Total height0,65 m Weight960 kg Extra SpecificationsStaal soort 1.2826Consumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicHosokawa AlpineIndustries > Recycling > Consumer wasteMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Fee ...

Manufacturer: HAMMEL Model: VB 750 DK Type of machine: Shredder Year of manufacture: 2021 (12/2021) Performance: 280 kW / 381 PS Weight: 22 t plus Magnet 1 t

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Mass of falling parts: 1000 kg Ram stroke: 800 mm Energy of full blow: 3600kgm Quantity of stroke: 110 Mass of hammer: 35t Year of production: 1974r.

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Ram stroke: 750 mm Energy of full blow: 1840 kgm Quantity of stroke: 120 u/min Mass of anvil block: 12,5 t Mass of hammer with anvil block: 21,9 t