hamm used for sale

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Sell a draft fan R 400 / 51-895 with a Siemens motor 1CV3182A

100 mm diameter pile driver suitable for Hammer HM100

General SKU435X1379 LocationBarneveld Main Features Motor7.5 KW Width340 mm Specified Features - Hammer Mill Hammer millcheck Moving hammers24 Hammer width20 mm With sieve cagecheck Housing dimensions 340 x 500 mm Inlet340 mm Motor7,5 kW (400 V, 1470 rpm) With variable speed drivecheck Speed882—1764 rpm Hammer Mills MaterialMild steel General MakeJehmlich GmbH Nossen SerialK190430 TypeHM 341 Year of construction2018 Mounted on framecheck With switchcheck With switchgear(as is) Floor space1,45x0,62 m Total height1,95 m Weight600 kg Extra SpecificationsMax capacity up to 20 t/h.Hammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteJehmlich GmbH NossenMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustr ...

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel General TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith:dust filter AZOblower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpmhopper with gear motor: 0.2 kW, 2730 rpmHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteHosokawa AlpineMills > H ...

General SKU351W929 LocationBarneveld MakeAubema Main Features Motor18.5 KW Width200 mm Specified Features - Hammer Mill Hammer millcheck Rotor size340 mm Grinding room size200 x 600 mm Moving hammerscheck Hammer width190 mm With grinding platenscheck With hoppercheck Inlet200x300 mm Motor18,5 kW, 380/660 volt, 1460 rpm Speedinvullen Hammer Mills MaterialMild steel General Type2506/2 No.8227 Year of construction1993 Mounted on framecheck With switchcheck Floor space2,6 x 1,1 m Total height2,5 m Weight1000 kg Extra SpecificationsOutput: 200 x 900 mm Technical specs Extra informationOutput: 200 x 900 mmHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteAubemaMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additi ...

General SKU043R200 LocationBarneveld MakeEngelsmann TypeMFL 85N/80-E1 Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) General No.30223/88 Floor space1,7x0,7 m Total height1,2 m Weight800 KgHammer MillsCatalysts & fillersFeed additivesDiscountOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteEngelsmannMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesDiscountIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Chemical > Dyes & pigmentsIndustries  ...

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cage2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Hammer Mills MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Mounted on framecheck With switchcheck With switchgear(as is) Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

General SKU027E101 MakeApex Construction Ltd. Type114 DW-SF No.A-40880 Year of constructionunknown Mounted on framecheck Main Features Motor22 KW Inlet diameter260 mm Width295 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeø 260 x 295 mm Fixed hammerscheck With sieve cage2x pore size 1.25 mm: 1x 1.75 mm With hoppercheck Inletfeeding through twin screw metering screw Motor22 kW (380 V,1470 rpm) Speed750 rpm Hammer Mills Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space2,0 x 1,3 m Total height2,4 m Weight1100 kg Extra information Extra Specifications- Mirror polished finishing - Double Dosing Screw     Motor 0.55 kW     Gearbox output 5.7 – 34 rpm (manual variator)     Dosing screw capacity: maximum 4.5 m³/h Hammer MillsCatal ...

General SKU356W956 MakeBühler TypeDFZH-2 No.10267697 Year of construction1996 Main Features Motor185 KW Width850 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia. 780 x 120 mm (2x) Grinding room sizeDia. 850 x 160 mm (2x) Moving hammerscheck Hammer width7 mm With sieve cage3,5 mm (3x), 4 mm (3x), 5 mm (2x) With hopper(outlet hopper, outlet size 200 x 200 mm) Inlet320 x 200 mm Motor2x 90 kW (380 volt, 2966 rpm) Speed2966 rpm Hammer Mills MaterialMild steel General Mounted on framecheck LocationBarneveld Floor space2,40 x 1,70 m Total height4,3 m Weight3500 kg Extra information Extra Specificationsinlet with dosing unit. Buhler Type: DFAT-2 with fan, type: FXH 15.06 spez ALS fan motor: 2,2kW, 400V Hammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsum ...

General SKU291Y468 LocationBarneveld MakeHosokawa Alpine Main Features Motor15 KW Width335 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeø 260 x 300 mm Moving hammers18 Hammer width125 mm Without sieve cagecheck Housing dimensions 520 x 310 mm Inlet335 x 155 mm Motor15 kW (380 V 1460 rpm) General TypeOmniplex 40/32HA Floor space0,80 x 0,75 m Total height0,65 m Weight960 kg Extra SpecificationsStaal soort 1.2826Hammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteHosokawa AlpineMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Chemical > D ...

With magnet

High-pressure pump - see pictures

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

NEW, suitable for Martin HB100, Year of construction: 2019

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

Enclosure, universal enclosure, aluminum enclosure -Manufacturer: Hammond, Aluminum Housing Junction and Pull Box -Type: 1550Z102 -External dimensions: Housing 90/36/H30 mm -Quantity: 9 pieces available -Price: per piece / Minimum order 3 pieces -Weight: 0.1 kg/pc.

HAMMELMANN HDP 124 Dual Unit Integration of 2 x Hammelmann HDP 124 high-pressure pumps Technical data: Manufacturer: Hammelmann GmbH, Germany Type: Twin Unit with 2 x HDP 124 Year of Make: 2013 Machine numbers: B3.01124.xxxx and B3.01124.xxxx Working pressure: 2 x 2,500 bar Max. flow rate: 2 x 24 l/min Piston Diameter: P17.5 Engines: 2 x DEUTZ TCD 2012 L06 2V, Stage 3 Engine power: 2 x 129 kW at 2,150 rpm Diesel consumption: approx. 45–70 l/h Tank capacity: approx. 900 litres Noise emission: LWA = 110 dB Water connection: Express coupling Minimum water pressure: approx. 3 bar Required water volume: approx. 2 m³/h Dimensions: approx. 11.05 m x 2.60 m x 4.50 m Weight: approx. 11,750 kg Built on: DAF 75.250 4x2 truck, 250 hp, 19 t box body Aquajet 12 – n°01 – year 2013 2450bar – 24l/min Engine Deutz 5 919h Pump 3 723h Aquajet 12 – n°02 – yea ...

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

for sale is a very well-maintained Hammelmann high-pressure system, built in 2019, with ES 3 control. The system can be used immediately and is in very good used condition. Technical data: Manufacturer: Hammelmann GmbH Machine No.: B9.02302.xxxx Ref: 09.63302.xxxx Year of Make: 2019 Pump capacity: 261 kW Speed: 1,800 rpm Max. pressure: 940 bar Flow rate: 152 l/min Piston diameter: 33 mm Pressure Control Valve: 0046 Oil: PAO VG 320 Oil volume: 28.5 l Control: Hammelmann ES 3 Operating hours according to the display: Operating hours system: 3.048,43 h Pump operating hours: 1,624.17 h Drive Diesel Volvo TAD 1351 VE step IIIA/TIER 3 Power 285 kW The facility is well maintained, technically ready for use and can be used immediately. Further information, photos and price on request.

250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!

The DYNAJET 500th HELI Blue Performance is designed for professional users who need a high-performance, trailer-based high-pressure waterjet system for demanding industrial applications. With hot and cold water operation up to 500 bar and a maximum flow rate of 30 l/min, it is ideal for tasks such as surface preparation, paint and rust removal, concrete renovation and maritime maintenance. Its robust trailer design is designed for demanding daily operations and transport between job sites. The single-axis design supports easy maneuverability, while the integrated single-point lifting eye allows for efficient lifting and positioning when crane handling is required. The Targa design separates the motor, pump and burner area from the operator area, which supports safe and ergonomic operation while reducing noise pollution at the operator station. The colour display provides a clear ov ...

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min. Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3 motor AH 250 M-4; 400V; 50 Hz Dimensions LxWxH: approx. 1665x1212x1641 mm Weight: approx. 1050 kg Built: 2008 Condition: in very good used condition. Includes complete documentation.

Electric Hammelmann HDP 127 high-pressure system on trailer – 1,000 bar / 48 l/min – 110 kW For sale is a high-performance electric Hammelmann high-pressure system of the type HDP 127. The system is mounted on a braked trailer and equipped with a soundproof hood. Technical data: Manufacturer: Hammelmann Pump type: HDP 127 Year of manufacture of high-pressure pump: 2012 Trailer year: 2012 Operating hours: 3,693 h Maximum working pressure: 1,000 bar Flow rate: 48 l/min Built-in electric motor: 110 kW Power supply: 400 V / 50 Hz Engine speed: 1,500 rpm Pump speed: 440 rpm Plunger diameter: 30 mm Maximum water temperature: 40 °C Permissible total weight: 3,500 kg Tyres: 195/70 R15 103 K Ball Coupling Braked trailer Soundproofing enclosure The system is suitable for demanding industrial cleaning work, surface treatment and other professional high-pressure a ...

Technical data: Condition: New device Working pressure: adjustable from 170 to 350 bar Flow rate: 17–21 l/min Pump: Ceramic Triplex Plunger Pump Pump speed: max. 1,450 rpm Hydraulic power: 14 kW / 19 hp Engine: Honda 2-cylinder 4-stroke petrol engine Engine power: 16.4 kW / 22 hp Motor speed: max. 3,150 rpm Electric starter with engine oil pressure monitoring Fuel consumption: approx. 5.5 l/h Tank capacity: approx. 20 litres Water connection: GEKA High pressure connection: M22 × 1.5 Maximum water temperature: 40 °C Required water inlet pressure: 1.8–6 bar Dimensions: 79 × 79 × 99 cm Weight: 130 kg Chassis: Two-wheeler trolley with pneumatic tyres Item number: 1487050 Standard equipment includes a 10 m high-pressure hose, a high-pressure gun with an approx. 800 mm long spray lance, nozzle holder, 15° flat spray nozzle, pressure gauge, infinitely adjustab ...

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

WOMA MK3 high-pressure system – 2,500 bar – DEUTZ Diesel – Year of manufacture 2009 For sale is a used WOMA high-pressure system on trailer chassis, built 2009. Robust industrial high-pressure system from WOMA with DEUTZ 6-cylinder diesel engine, suitable for professional high-pressure cleaning, surface treatment and industrial applications. Technical data high-pressure system: Manufacturer: WOMA Type: MK3-250M-P 18 Year of manufacture: 2009 Operating pressure: 2,500 bar Flow rate: approx. 26 l/min Drive power of the pump: 117 kW Drive speed: 1,800 rpm Design: mobile trailer system Net weight: approx. 2,250 kg Permissible axle load: 2,700 kg On-board voltage: 24 V DC WOMA Order No.: A2009/00279 CE marking Diesel engine: Manufacturer: DEUTZ Type: TCD 2012 L06 2V 6-cylinder diesel engine Power: 127 kW / 170 hp Engi ...

The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.

High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t

Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t

Hammer C3-31 5-speed station wagon Year of construction 2024 With sliding table 2000mm Boom table 1100 with telescopic Length stop 1200mm swivel -45° 400V 3 kW (4 HP) 3 motors Degree Grid Index System Saw blade 250-315mm (without saw blade) Cutting height of 100mm Swivel: 90°-45° Parallel cutting width of 600mm Planing width of 310mm Planing fence can be swivelled 90° to 45° Dressing table length of 1400mm 3 Knife Automatic Planing Shaft Passage height from 4-225mm Thickness table length of 540mm Milling machine: 90° rigid Milling machine: 3000/6000/8000 and 10000 rpm Useful height 100mm Weight approx. 550 kg G&2992-o1852

engine: diesel engine Cummins B6.7 - Stage 5 (AdBlue) power: approx. 209 kW / 280 hp shafts with 7/7 discs with 5 knives per discs & breaker bar with combs Mobile Hook Lift Frame wheel axle with drawbar hydraulic height adjustment for magnet hydraulic height adjustment for discharge belt water sprinkling system Monitoring Industry 4.0 weight: approx. 20 t

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

NEW - year of construction 2022, with Lehnhoff MS01 mount, incl. 1 chisel, 105 kg own weight, suitable for 1 - 2.5 t excavators

for 7 - 16 t dead weight, 700 kg dead weight, 45 l / min oil flow, 360° rotation, various mounting plates & hoses available on request