hall used for sale

Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...

Halliburton HD 400 Pump Container . EX-container, VOLVO diesel engine D16. Diesel tank. Fan. Halliburton with 6" valve - can be replaced.

Building width 9 m Length 18 m Height 6.2 m Wind zone 1 Snow Load Zone 2 Monopitch roof inclination 10 degrees.

HALLA Diesel Forklift HDF 25 Nominal load capacity 2500 kg at 500 mm LSP Triplex full free-lift frame: lifting height 4500 mm, overall height 2130 mm, free lift 1140 mm Fork length 1000 mm Sideshift Superelastic tyres Wadler/Hydrostat KIA diesel engine Total weight approx. 4300 kg Forklift is BAV tested. Roadworthy. Can be redeemed.

Manufacturer : FRAVIZEL Model: Lynx + Halley MFCR55 Type of Machine : wire saw systems for block mining in a quarry. Year of Manufacture: 2022 Commissioned: 2023 Condition: The machine is relatively new and have seen little use. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 26070 Technical data: - Max. load capacity in horizontal position 7500 kg - Face plate dimensions 1500 x 1500 mm - Face plate motorized swivel 0 - 120 ° - Rotary movement electr. infinitely variable 0.0028 - 1.04 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V x 25 kW - Table height in horizontal position approx. 1600 mm - Handheld remote control - Space requirement approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Offer 26128 Technical data: - Max. load capacity in horizontal position 5000 kg - Face plate diameter 1150 mm - Face plate motorized swivel 0 - 130 ° - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Table height in horizontal position approx. 1220 mm - Handheld remote control - Space requirement approx. W 1350 x H 1220 x D 1900 mm - Weight approx. 3500 kg - Adapter plate with clamping device for round material

capacity: 5 t condition: gut amount: 1 auf Lager Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used RÖDER H-Line tent hall (built around 2020) in an excellently maintained condition. The hall is currently still standing and is available for dismantling at short notice. The most important key data at a glance: Area & dimensions: 20 × 50 m (approx. 1,000 m² usable area) Heights: Generous 6.20 m eaves height / 9.56 m ridge height (ideal for high-bay storage and smooth forklift/truck traffic) Construction: Bolted aluminium frame structure – no elaborate or expensive concrete foundation is required (ground nail anchoring on asphalt/gravel is sufficient). Statics: Snow load 0.85 kN/m², wind zone II (fully certified according to German building standards). Your decisive advantage – the complete turnkey package: The attractive total price already includes the complete, high-quality accessories: A high-performance diesel hall heating system (mobiheat / Thermobile, 150 ...

Used RÖDER H-Line tent hall (built around 2020) in an excellently maintained condition. The hall is currently still standing and is available for dismantling at short notice. The most important key data at a glance: Area & dimensions: 20 × 50 m (approx. 1,000 m² usable area) Heights: Generous 6.20 m eaves height / 9.56 m ridge height (ideal for high-bay storage and smooth forklift/truck traffic) Construction: Bolted aluminium frame structure – no elaborate or expensive concrete foundation is required (ground nail anchoring on asphalt/gravel is sufficient). Statics: Snow load 0.85 kN/m², wind zone II (fully certified according to German building standards). Your decisive advantage – the complete turnkey package: The attractive total price already includes the complete, high-quality accessories: A high-performance diesel hall heating system (mobiheat / Thermobile, 150 ...

Ladies and gentlemen, We allow ourselves, on the basis of our general terms and conditions below: Offer warehouse: The mass of the hall are: Snow load 75 Kg . The price of the hall without dismantling. The dismantling of the hall could be taken over by us. The reconstruction of the hall can be organized At the moment we can offer other high-quality halls in the size of 150 m2 to 12,000 m2. We will be happy to send you an offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical  ...

Ladies and gentlemen, Offer: 2 used HALLEN see pictures Dimensions approx. width 21.00m / length 40.00m / eaves 9.00m / first 9.65m Snow load approx. 85 kg/m2 / 2 x crane 12.5 tons approx. 13 meters wingspan Condition very good Sightseeing is possible at short notice. PRICE: on request The price of the hall without dismantling. The dismantling of the hall could be taken over by us. The reconstruction of the hall can be organized At the moment we can offer other high-quality halls in the size of 150 m2 to 12,000 m2. We will be happy to send you an offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake ...

Steel hall, cooling hall sandwich panels clad used used Tem. Range approx. 3-12° C Walls: sandwich panels, PU foam approx. 100 mm Roof: trapezoidal sheet + 2x 60 mm insulation + rubber skin with jumper system and dehumidification The hall is separated in the middle by a partition wall. the cooling system is not part of the offer for the time being. In both halves there are 2 rows of double shelves, in the middle with autom. Shelf assemblers Shelf manufacturer: SCHÄFER Year of construction: 2006 approx. 4700 pallet spaces Galvanized steel sheet Shelf depth: approx. 1000 mm Compartment height approx. 1800 to 2000 mm Compartment width approx. 2900 mm compartment load 2x24 kN field load 537.6 kN Total dimensions approx. 50 x 15 x 30 m (LXWXH) Changes and errors in the technical data, information and prices as well as prior sale reserved.

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Hall 8.000 m ², 40 x 200 m, 7 m high (eaves) steel Hall / steel construction, self-supporting,. -Sheet metal walls, w/o roof sheet, self removal -smaller units possible, German Hall

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modula ...

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

For sale is the supporting structure of a dismantled industrial hall (built in 1983) with an original floor area of approx. 2,300 m². The steel frame structure consists of bolted IPE solid wall rolled sections (IPE 550 columns, IPE 450 trusses) and is completely hot-dip galvanized – ideal for the reconstruction of an industrial, warehouse or production hall. Technical key data: Hall width: approx. 24.5 m, length: approx. 93.5 m. Eaves height: approx. 6.3 m | Ridge height: approx. 7.2 m. Supporting structure: hot-dip galvanized steel frame construction (without crane rails / without wall and roof cladding). Documentation: Original statics, plans available. Condition: Dismantled, ready for transport Location: Mayen-Koblenz district (Rhineland-Palatinate) Price: The net sales price of the hall construction will be communicated on written request with complete company da ...

Steel hall, steel construction, trapezoidal sheet clad used Manufacturer: unknown Dimensions approx. 28 x 10 x 23 m The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 165 watts -Number: 1x lamp available -Dimensions: 540/540/H710 mm -Weight: 9.7kg

Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...

Galvanized steel hall, kits for screwing Dimensions approx. : 12 m long 2.5 m wide 2.27 m Height Front 2.57m height rear Completely clad including sheet metal and fire door Shipping surcharge available VAT can be declared Price : Net 3.361,34 + 638,65 ( 19 % VAT) = 3.999,99 Euro gross

Ceiling heating Vacurant Industrie Manufacturer: Vacurant Type: Ceiling Heating Energy source: Gas Location: Paderborn

ApenGroup LRP28DE Gas Heat Heaters Gas Type: G20 Natural Gas Connection pressure: 20 mbar Nominal heat load QN: 27 kW Nominal heat output: 24.63 kW Connection voltage: 230V 1N ,50Hz Air flow: 2700 m3/h Degree of protection: IP20 More items - new and used - can be found in our shop! International shipping costs on request!

ESTA FILTOWER F-160 ecolight hall ventilation system was built in 2018 in Germany by ESTA Apparatebau GmbH & Co. KG. The system is designed to extract dry, oil-free welding fumes generated during metal welding. It can also be used for the ventilation of production halls, ensuring effective removal of airborne contaminants from the working environment. The ESTA FILTOWER F-160 ecolight is equipped with four cartridge filters with a total filtration area of 160 m2. The filtration system achieves an efficiency of 99,9% in class M, allowing cleaned air to be recirculated within the production hall. Contaminants accumulated on the filters are automatically removed by compressed air pulses during operation of the unit. The ESTA FILTOWER F-160 welding fume extraction system features a compact design that occupies little floor space and allows the unit to be easily relocated according to th ...

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

LED high bay light, light fixture, high bay light, industrial lighting, industrial lamp, linear light, LED spotlight, high bay low beam light -Manufacturer: lichtline, LED high bay light with swivel arm -Power: 150 watts 5000K -Swivel arm: Length 3860 mm -Dimensions: 3860/340/H210 mm -Weight: 56 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Industrial hall with office space with an area of 1137 m2 constructed in 2013 is located in the Pomeranian Voivodeship between Słupsk and Lębork. Its excellent location in a special industrial zone close to the S6 expressway provides good transport links of the warehouse to the larger cities of Pomerania, i.e.: – Lębork: 21.4 km, – Słupsk: 34.1 km, – Bytów: 49.2 km, – Wejherowo: 56.9 km, – Gdynia: 78.6 km. The plot on which the industrial hall is located has a total area of 10900 m2 and is divided into: – office and production hall building (1137 m2), – space around the building paved with paving stones (820 m2), – the remaining part of the plot developed into green areas (approx. 8900 m2). The industrial hall building is divided into two parts: an office and social space of 397 m2 and a production space of 740 m2. The office space is finished on a turn ...

Overhead crane construction / rails / double T beam HEB - IPE Construction for bolting together from supports and crane runway rails Supports : 10 x HEB 160 at a height of 3.86 m 4 x IPE 300 at a height of 3.86 m AND Crane runway rails (welded on it with square solid material 30 x 40 mm) for screwing to the supports : 2 x IPE 300 in 13 m length 1 x IPE 300 in 11 m length 1 x IPE 300 in 7 m length For Sale Complete, total weight is about 5 tons. Price 6000 Euro net + 1140 Euro ( 19 % VAT) = 7.140,00 Euro gross VAT can be declared Price includes loaded onto truck. Viewing by appointment Shipping available for an extra charge

Commercial land for storage of products for rent. Price on request. There is also a production hall (680 m²) and a handling area (110 m²), which can be partially rented, advantage: the hall has a height of 12.4 m and an indoor crane with a lifting capacity of 12 tons. The hall is passable for heavy trucks. Price on request. The property is about 15 minutes from the A2 southern motorway, has the possibility for the use of a rail siding. Address: Gewerbezone 10, 9150 Bleiburg, Austria.

Main tent approx. 2,145 m². Modular aluminium system, longitudinal grid approx. 5.00 m. In addition, according to the test book, free-standing porch/canopy construction with open gable, 10 m or 15 m deep; their additional area is deliberately not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

Main tent approx. 1,815 m². Separately usable LOSBERGER system with modular aluminium system and approx. 5.00 m longitudinal grid. Also with 10 m or 15 m deep porch/canopy construction with open gable according to documents; additional area not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...

flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special el ...

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

Auction-ID: A1-50656-124

Span approx. 230 cm Auction-ID: A1-50656-111

Metrolab THM1176 Three-Axis Hall Magnetometer Manufacturer: Metrolab Technology SA Model: THM1176 Equipment type: Three-Axis Hall-Effect Magnetometer Location: 91701 Trnava Professional three-axis Hall-effect magnetometer system designed for precision measurement of magnetic fields. Suitable for laboratory, R&D, industrial measurement, magnet testing, field mapping and other professional magnetic measurement applications. Features / applications: Simultaneous measurement of X, Y and Z magnetic-field components Three-axis Hall-effect measurement technology Precision magnetic-field measurement Magnet testing and characterization Magnetic-field mapping Laboratory and R&D applications Industrial measurement and testing Condition: Used only a few times. Reported to have been working when last used. Current operational condition and calibration status have not ...