hack used for sale

used, kpl. 1 year warranty, built in 1999, plate size 1200 x 1200 mm, 70 plates with 50mm cake thickness (3500 liters capacity + 160 m2 filter area) or 90 plates with 30 mm cake thickness (2700 liters capacity + 205 m2 filter area), open outlet, pressure max. 15 bar, dimensions 9000 x 2000 x 2400 m m, weight approx. 18 to, PP - drip plate (motorized)

Ladies and gentlemen, we are able to offer larger quantities of chopping chips in the long term. We would be pleased to have an inquiry. Yours sincerely Trade & Translations

used, kpl. 1 year warranty, plate size 400 x 400 mm, 20 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter area 5m2, dimensions 2500 x 700 x 1500 mm, weight 1000 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, Piston pump with cpl. Piping with built-up

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 800 x 1400 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Patent high mass -Instruction manual -marking angle

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 75 liters, filter area 6m2, dimensions 3500 x 800 x 1600 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, built-up Häcker piston pump with kpl. VA - Piping

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Hackemack Transportband, Working length mm: 2500, Working widht mm: 1300, Own controller: no, Bandsteuerung : yes, Total power kW: ca.0.75, elektronisch regelbar: 6-30,

Manufacturer: Hackemack, Type: 2540, Year: 1995, Working widht mm: 1300, Working height in mm: 950, Conveyor lenght mm: 11000, Through running hight mm: 90, Thermal output: 2 Register, Feedin speed m/min: 5-20, Belt conveyor: yes, Flat spray nozzle: yes, Round nozzle: Flachdüse, Damper register - items: 2, 1st Damper register kW: 65, 2nd Damper register kW: ca.50, Year :1995

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Number of lamps: 3, Lampen gerade eingebaut: 3, Power per lamp watt UV: 80, Electrical power consumption kW: ca 47, Year :1995

Manufacturer: Hackemack Transpoortband, Type: 3420, Working widht mm: 1400, Total hight mm: 980, Adjustable: yes, Seitlicher angetriebener Führungsriemen: 3500, Rollenteilung: yes, Working widht mm: 1400, Antrieb verstellbar: 1600, über Freuquenz: 5-30, Handverstellung Vorschub: 2 X 1,5, Conveyor speed m/min: 2 Unterschidliche Geschwindigkeitenb,

Manufacturer: Hackemack, Type: Gurtbandkurve, Year: 1990, Outer radius mm: 5000, Belt transport: yes, Year :1990

Manufacturer: Hackemack, Type: KTR, Number of lamps: 1, kW power 1 lamp: 11,20, Adjustable: Halblast, Position of lamps: gerade, Power per lamp watt UV: 60/120, Working widht mm: 1300, od distance mm: 76,2, Conveyor length mm: 2.000, Feeding speed m/min: 3 - 15, Working widht mm: 1300,

Manufacturer: Hackemack, Type: KTR, Year: 1992, Driven: yes, Length mm: 1000, Working widht mm: 1350, Total hight mm: 850 - 950, Rollenteilung mm: 140, Rollendurchmesser: 65, Conveyor speed m/min: 6 - 30, Drive power kW: 0,37, Year :1992

Manufacturer: Hackemack 2 Lampen UV Trockner, Year: 2000-2008, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Working widht max mm: 1400, Number of lamps: 2, kW power 1 lamp: 25, Lampenlänge mm: 1400, Lamps straight installation: yes, Elektronische Leistungregelung: yes, Outer belt width mm: 2400, Feeding speed m/min: 6-30, Conveyor: Band, Exhaust air diameter mm: 2 X 200, Year :2000-2008

Manufacturer: Hackemack, Type: Transportband, Year: ca.1990, Working length mm: ca.5000, Working widht mm: 1300, Total hight mm: 890 verstellbar, Belt width: 1300, Engine power kW: 1,5, Feeding speed min-max m/min: 5-30, Feeding speed continous adjustable: yes, FREE TEXT: der Düsenaufsatz wird verschrottet, Year :ca.1990

Manufacturer: Hackemack Transportrollengang, Type: Rollgang, Year: ca.1990, Working length mm: 2100, Working widht mm: 1460, Engine power kW: 0,5, Durchmesser Rolle mm: 60, Rollenmittenabstand: 140, Wellendurchmesser: 25, angetrieben über Rundriemen: yes, Total hight mm: 890 +- 50, Total hight mm: 890 +- 50, Feeding speed continous adjustable: yes, Year :ca.1990

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 17.15, Lampen gerade eingebaut: yes, Lampen von unten: no, Year :1995

Manufacturer: Hackemack, Type: KTR 2061, Year: 1997, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Number of lamps: 1, kW power 1 lamp: 10, kW power all lamps: 11,75, Lampen gerade eingebaut: 1, Power per lamp watt UV: 80, Conveyor lenght mm: ca 2000, Feeding speed m/min: 5 - 25, Drive power kW: ca. 1,5, Working height in mm: 980, Year :1997

Manufacturer: Hackemack, Type: KTR 2061, Year: 1999, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Working width min min mm: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 1, Lampen von unten: no, Power per lamp watt UV: 80, Conveyor lenght mm: ca. 2000, Year :1999

Manufacturer: Hackemack UV Trockner 1 Lampe 1300 mm, Type: 2008 Umgebaut, Year: 2000+2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 80, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: ca.10, kW power all lamps: 15, Lampenlänge mm: 1450, Reflektor von oben abnehmbar: yes, Lamps straight installation: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Conveyor lenght mm: ca.3000, Conveyor lenght mm: ca.3000, Outer belt width mm: 2400, Feeding speed m/min: 6-30, Drive power kW: 1,2, Feedin speed m/min: 6-30, Year :2000+2008

Manufacturer: Hackemack, Type: KTR 20/40, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1350, Working width min min mm: 400, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 15,6, Lamps inclined installation: no, Lamps straight installation: yes, Lamps from below: no, Position of lamps: fest, Abluftmenge cbm/h: 1200, Conveyor lenght mm: 2500, Working widht mm: 1350, od distance mm: 100, Conveyor lenght mm: 2500, Outer belt width mm: 1750, Working hight approx mm: 920 +/- 50, Conveyor: Stange, Exhaust air diameter mm: 160, Working widht mm: 1350, Working height in mm: 920 +/- 50, Length mm: 2500, Through running hight mm: 80, Thermal output: 15,6, Feedin speed m/min: regellbar, Rod transportation: yes, Belt conveyor: no, Exhaust air m³/h: 1200, Fresh air m³/h: 1200 ...

Manufacturer: Hackemack, Type: KTR 2040, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Lampen gerade eingebaut: 1, Position of lamps: gerade, Power per lamp watt UV: 80, Working widht mm: 1350, od distance mm: 120, Conveyor lenght mm: 2000, Feeding speed m/min: 10-25, Conveyor: Stange, Drive power kW: 1,2, Working widht mm: 1350,

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

Hydr. Hacksaw (Made in Croatia) Type BS 320Year of construction approx. 1980Saw range Round 320 mmSaw area Square 280 x 280 mmSaw blade 550 x 45 x 2.25 mmMaterial Inlet height 680 mmSaw speed 42 - 55 - 85 - 110 strokes/min. Motor power 1.8 and 2.4 kW Pole switchableMains connection 400 volts, Hz- Mitre adjustment up to 45- Saw motor with 2 speeds and 2 V-belt steps- Hydraulic saw bracket lowering- Hydraulic cutting pressure adjustment via throttle valve- Coolant device in the

Hacksaw Kasto BSM 403

Dimensions: 1150x1500mm

Behringer-KS-400-HY-01[printfriendly] X Attention –––Promotions! X Some prices are available until X 31.10.2015 reduced by 20% Hydr. Hacksaw Behringer KS 400 HY Make: Behringer Type: KS 400 HY Masch.-Nr.: 688286 Year of manufacture: 1998 / 2015 tüp. Comm. No.: 3990600/009 Special fixed price: 5.940,- € | now 4.752,- € Specifications Sawing range up to: Ø 400 mm, 350 x 350 mm, 380 x 300 mm Saw blade dimensions: 650 x 50 x 2.5 mm 3 lifting speeds: 40 / 62 / 90 strokes/min. Drive power: 3.0 kW Weight: approx. 820 kg Footprint: W 1.80 x D 0.65 x H 1.25 m Machine color: off-white/red Equipment 3 lifting speeds Stepless cutting pressure adjustment Prestressed plate guide of the saw bracket Dust-tight closed gearbox Accelerated return stroke of the saw bracket Closed Oil Hydraulic System Coolant Setup Limit stop switch Automa ...

Semi-automatic/hydraulic Hacksaw Manufacturer: machine tool factory Silistra Type: OH 163.01 Serial No.: 970 Year of construction: 1972 Technical data: E supply: 380 V, plug 16 A

Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Heinrich Hutze & Co. Metal Hacksaw Manufacturer: Heinrich Hutze &. Co. Type: Metal Hacksaw Electricity: 400V, 16A Machine saw blade: 500 mm Sandflex MM 500-38-2,0 More items - new and used - can be found in our shop! International shipping costs on request!

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

Auction-ID: A1-41275-49

Auction-ID: A1-41275-40

Hacksaw Fortuna Mitre cuts Cable needs to be replaced. Length 1.20 m Height 1.00 m Width 0.60 m

Axle:XZ (2-axle) Ø 350 Dimensions: 1800x4400x2000mm

Default Auction-ID: A1-45188-156

Default Auction-ID: A1-45188-93

Specifications: - E.- Hydr. Lifting-lowering of the saw bracket - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° round approx. 210 mm - Flat approx. 240 x 190 mm - Square approx. 210 x 210 mm - Cutting range at 45° round approx. 150 mm - Flat approx. 150 x 100 mm - approx. 130 x 210 mm Square approx. 145 x 145 mm - Lifting speeds + cutting speeds adjustable - Stroke rates 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre adjustment Vise with opening width up to 260 mm - E.-Mot. Coolant Setup - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Includes 5 extra saw blades. Auction-ID: A1-45188-87

Equipped with: power current connection, adjustment angle Auction-ID: A1-41992-73

Roller conveyor size L3000Wx300mm