h k used for sale

Hydraulic pump ORSTA A1,6 R ( A1,6R ) TGL 10859 shaft: Ø 14 mm flange: 75 x 90 mm used, tested ! Dimensions: 95 x 75 x 90 mm

Hydraulic pump ORSTA C40 - 3L ( C40-3L ) TGL 10859 shaft: Ø 22 mm flange: 160 x 125 mm used, tested ! Dimensions: 215 x 125 x 160 mm

Hydraulic pump ORSTA 2 x C6,3 - 2R ( 2xC6,3-2R ) TGL 10859 shaft: Ø 14 mm Flange: 90 x 75 mm used, tested ! Dimensions: 260 x 75 x 90 mm

Switching valve, distributor, hydraulic valve ORSTA IIB HNN012.009 ( IIBHNN012.009 ) Pn 16 MPa New ! see also HY1100 as New and HY255, HY907 as used items ! Dimensions: 86 x 86 x 96 mm

Hydraulic Pump ORSTA C25 - 3R ( C25-3R ) TGL 10859 Nominal pressure: 16 MPa ( 160 bar ) Nominal flow rate: 25 dm3/min Nominal speed: 1450 rpm shaft: Ø 22 / 18 mm, spline shaft profile, 6 wedges flange: 112 x 92 mm used, tested ! Dimensions: 200 x 115 x 95 mm

Hydraulic pump ORSTA 10/20.0-110 TGL 37069 Nominal pressure: 10 MPa ( 100 bar ) Nominal displacement volume: 20 cm3 Rated speed: 1500 rpm Flange: 115 x 105 mm New ! Dimensions: 160 x 105 x 115 mm

Size: 560 x 770 mm

For sale I offer a hydraulic spreader / lifting wedge from Holmatro with accessories. The hydraulic spreader is an unused Exhibit with slight traces of storage. Further condition please see the pictures. Details: Holmatro HVLV 16 S 2, wedge for vertical lifting Operating pressure: 720 bar Stroke: 20 mm Min. insertion opening: 9 mm 16 ton with spring retraction Shipping available for an extra charge. Hydraulic spreader is workshop tested and sold immediately ready for use with new UVV test and can be tested on site. Other accessories available on request. # Holmatro # Hydraulic spreader # Lifting wedge # Spreader

Pressure Switch ORSTA D5 CO 2 HNN012.016 ( D5CO2HNN012.016 ) New ! Dimensions: 70 x 85 x 170 mm

Hydraulic Cylinder EATON, HYDRO-LINE HR5F-2X4-N 1-2-N-V-V-1-1 HAHA2X4-N-Br / 02KR J081 210037 rod diameter: Ø 25 mm stroke: 100 mm pmax: 100 bar New !' Dimensions: 310 x 105 x 65 mm

Hydraulic pump ORSTA MF 125/42 DP 21 P ( MF125/42DP21P ) Dimensions 380 x 180 x 220 mm

Switching Valve, Manifold, Hydraulic Valve ORSTA HNN012.009 Nominal pressure: 16 MPa (160 bar) New ! Dimensions: 86 x 86 x 96 mm

Hydraulic Pump ORSTA MF 27-056/42-BL 20P ( MF27-056/42-BL20P ) Dimensions 320 x 180 x 170 mm

Dual Hydraulic Pump, Hydraulic Pump ORSTA 6.3/20.1-230 + 1.6/20.0-260 ( 6.3/20.1-230+1.6/20.0-260 ) TGL 37069 flange: 112 x 110 mm New ! Dimensions: 250 x 105 x 115 mm

Dual Hydraulic Pump, Hydraulic Pump ORSTA 4/20.0-260+4/20.2-230 ( 4/20.0-260+4/20.2-230 ) TGL 37069 Flange: 112 x 110 mm New ! Dimensions: 250 x 105 x 115 mm

Hydraulic Pump with Intermediate Flange and Coupling PZL- HYDRAL, ORSTA 4/16.0-220 4/160 220 TGL 37069 Flange: 85 x 76 mm New ! Dimensions: 125 x 110 x 90 mm

Triple Hydraulic Pump, Hydraulic Pump ORSTA C25 - 3L + C25 - 2L + A6.3L ( C25-3L+C25-2L+A6.3L ) TGL 10859 flange: 112 x 92 mm New ! Dimensions: 435 x 105 x 115 mm

Hydraulic Cylinder ORSTA B1-40/25x630 TGL 10906 Piston diameter: Ø 40 mm Rod diameter: Ø 25 mm stroke: 630 mm New ! Dimensions: 820 x 75 x 60 mm

Hydraulic cylinder ORSTA C1-40/25x630 TGL 10906 Piston diameter: Ø 40 mm Rod diameter: Ø 25 mm stroke: 630 mm Pivot diameter: Ø 25 mm used ! Dimensions: 790 x 100 x 105 mm

Hydraulic pump with motor and suction filter ORSTA 6,3/20-210 TGL 37069 motor: 1.5 kW 220 / 380 V IP44 used ! Dimensions: 580 x 300 x 250 mm

Hydraulic cylinder, double-acting ORSTA B1-40/25x1000 TGL 10906 Piston diameter: Ø 40 mm Rod diameter: Ø 25 mm stroke: 1000 mm New ! Dimensions: 1180 x 70 x 75 mm

Hydraulic cylinders, double-acting ORSTA B2-50/32x560 TGL 10906 Piston diameter: Ø 50 mm Rod diameter: Ø 32 mm stroke: 560 mm spare part e.g. for Hohenstein RBT400 ! used !' Dimensions: 870 x 150 x 105 mm

Robojob HACE067V2

Haco PC15

1. Property description The property on offer is a high-quality, modular lightweight hall from the renowned manufacturer Höcker. The cantilevered construction is based on a durable aluminium structure in combination with insulated wall and roof systems. This makes the hall ideal as a frost-protected storage, logistics or work surface. A particular advantage is the high flexibility of the system: The hall can be dismantled, moved or expanded, making it an economically attractive alternative to a new building. The hall was used commercially and is already functionally structured – immediate use is possible without major adjustments. Technical Data & Equipment Dimensions Length: approx. 35.00 m Width: approx. 15.00 m (cantilevered) Interior height: approx. 4.06 m (in the frame corner) Roof pitch: ~10° Floor space: approx. 525 m² Grid size: 5.00 m (7 fi ...

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

Turret Handler Ismeca Semiconductor NX16 Specifications: Supplier name: Ismeca Malaysia Construction year: 2011 Accessories: AssLabeling Laser A000 966 Find more here - / Contact us at -

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - / Contact us at -

Manufacturer : Schnupp Type of machine : Hydraulic Press Capacity: 2,500 tons Technical details in picture Find more here - / Contact us at -

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

HADEF electric chain hoist Payload 1,500 kg Lifting speed 1/4m/min with electric chassis Travel speed 4 / 16 m / min Chains 7/8 x 23 mm Complete electrics and traction motors for crane bridge available - Compact design -

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

x-travel:1000 mm y-travel:800 mm z-travel:800 mm weight of the machine ca.:24000 t dimensions of the machine ca.:ca. 7,8 x 6,1 x 3,4 m m

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

For sale is a used Nordson Problue 10 hot melt machine

For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)

pressure:2,5 t

turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.

Tetra Pak Aseptic Homogenizer 300 – Factory New (2024) High-performance aseptic homogenizer designed for advanced liquid food processing. The Tetra Pak Aseptic Homogenizer 300 delivers exceptional reliability, precision engineering, and high production capacity for demanding industrial applications. Built in 2024 and in factory-new condition, this machine has 0 working hours and has never been installed in production, making it an ideal solution for processors seeking modern aseptic homogenization technology. General Information - Manufacturer: Tetra Pak - Model: Aseptic Homogenizer 300 - Year of Manufacture: 2024 - Condition: Factory new - Working Hours: 0 hours (never installed) Technical Specifications - Maximum Capacity: 12,960 L/h - Working Pressure: 250 bar - Number of Pistons: 3 - Piston Diameter: 63 mm - Valve Design: Mushroom type with stainless steel sea ...

Refer to code 1184 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

pressure: 120 t stroke: 400 mm dayligth: 900 mm feed down: 5,8 mm/sec feed up: 9,5 mm/sec Heads: 200x125 mm total power requirement: 6 kW weight of the machine ca.: 1250 kg dimensions of the machine ca.: 1900x1000x2450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.