h k used for sale

Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90

Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.

System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

Pr. No.: 1224418281 // Sr. No.: FR. EAA0-00271

1 cleaning head 1 filling head

POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

High quality machine housing, 548 x 129 x 200cm hoch, KMS, mint condition -90% Special price ! If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. The parts have minor signs of disassembly. High quality machine enclosure, length 5480, width 1285, height 2000mm, Consisting of: - Total 12.24 running metres of enclosure, - High quality frame with removable panels, all top painted, - 2 large double doors without locking system with plexiglass, - The back consists of 7 removable elements of plexiglass and sheet metal - The top is made of plexiglass all round - The roof consists of slide-on frames with plexiglass edging. - The elements are all very strong and of high quality - Incl. the many machine feet and the  ...

HORIZONTAL MACHINING CENTER NR. 2 KITAMURA HX500I WITH FATESYSTEM SHUTTLE Features: X-AXIS STROKE: 870 MM Y-AXIS STROKE: 710 MM Z-AXIS STROKE: 660 MM 4TH AXLE (ROTARY TABLE): 0.001-360 ° TABLE: 500 X 500 MM MAX PERMISSIBLE LOAD ON THE BOARD: 800 KG SPINDLE CONE: ISO50 ROTATION SPEED: 12,000 RPM GAMMA CHANGE: 2 GEAR RANGES FAST FEEDS: 50,000 MM/MIN TOOL CHANGE KITAMURA 1:100 SEATS TOOL CHANGE KITAMURA 2:50 SEATS CONTROL: FANUC 16 iM SHUTTLE FASTEM SYSTEM TO 16 STATIONS

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock

Handy hydraulic punching bracket with 70mm projection. Maximum punching capacity Ø24mm in 16mm steel. A double-acting hydraulic unit with a maximum printing capacity of 700bar. This new machine comes from a warehouse clean-up. Additional punching tools would be sold separately.

Size 46 cm Function filmcutter with light table and rotatary cutting wheel

Horizontal machining center Kafo HVC 500 :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18i MB Tool connection: BT 50 Spindle power: 25Kw Number of spindle revolutions: 10000 Number of tools: 60 X Shaft Stroke: 720mm Y Axis Stroke: 650mm Z Axis Stroke: 650mm Rapid feeds linear axes X Y Z: 48m/min Pallet size: 500x500mm Pallet type: indexed Pallet degrees: 0.001 Maximum load allowed: 800Kg High cooling pressure: yes Pressure value: 20bar System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4035mm Width: 5170mm Height: 3000mm Weight: 13000Kg

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Perkin Elmer Heater with Quartz Cuvette for Perkin Elmer AAS Systems

Key data: 240 KW, 300 kVA

We currently offer: Number 25 Himoinsa generator set Type: GP0. EST Engine Iveco Type: 544706 Power 240 KW / 300 KVA Built in 1999 Hours: 13885 dB 97 Metrics L: 4.10 m B: 1.60 m H: 2.00 m Runs einweindfrei You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

10 meter deep hole boring machine Kramatorsk KJ1910 10-meter boring depth - Heavy duty: 25-ton workpiece foratrice per fori profondi Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy), Counter rotation: Yes, Drlling depth: 10000 mm, Max workpice weight: 25 ton, Spindle motor: 90 kW, Counter rotation motor: 92kW

Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine -Voltage: pneumatic -Weight: 270 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

Offer 25080 Sliding - panel shelf with 10 movable material stands Specifications: - Stand - compartment dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / installation area 180 mm - Max. load capacity per compartment 2000 Kg - Slide-in bracket bracket - Track rail L 4750 mm - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg

Manufacturer: Kohnle Model: Hardening System Year of Manufacture: 1995 Voltage: 400/230 V Frequency: 50 Hz Current: 220 A Power: 100 kW Find more here - / Contact us at -

Hydr. Hacksaw KASTO HBS 210 / 240Masch. No. 1116 145 220 Year of construction 1994Saw range at 90 round 210 mmflat 240 x 190 mmsquare 210 x 210 mmat 45 round 150 mmSaw blade length 400 mmStroke rates 62 / 125 strokes per min. Material support height: 500 mmMotor power: 0.5 / 0.75 kWNerg connection: 400 volts, 50 Hz- Drive motor with 2 speeds- Coolant pump in the machine baseSpace required: L x W x H: 1200 x 500 x 1200 mmWeight: 170 kgGood condition; used

cutting diameter: 1060 mm saw band length: 11.430 x 80 x 1,6 mm cutting width: 1,6 mm cutting range: 1060x1260 mm Control: CNC cutting speed: 12-90 m/min power capacity: 11 kW table load: 20 t Cutting Length max.: 6100 mm total power requirement: 20 kW weight of the machine ca.: 21,1 t dimensions of the machine ca.: m Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your vis ...

(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure: 100 bar Oil Tank: 1200L Weight of Machine: 10000 Kg. Electrical Supply:  ...

Used machine, Woma / Kärcher Ecotherm, hot water Working pressure: 500 bar flow 27 lpm, Year of construction 2009 Drive: Diesel 36.5 kW, Kubota V 2403 Diesel Operating hours: approx.: 645 h,

Boki HY1350 municipal vehicle with snow plow and sand/salt spreader, Technical specifications:, - Registration date: 08/1994, - 3.82 m long, - Performance: 64 k, - Diesel engine, - with German approval, - All-wheel steering defective, - Oil loss from the engine, Accesories:, - with three-way tipper, - hydraulically pivoting snow blade, - German approval

feed pressure: bar liter capacity: l power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU446W1491 LocationBarneveld MakeKühni No.981791 Year of construction1998 Pressure Vacuum possible jacketcheck Working pressure shell3.2 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface14 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface±14m² Tube capacity100 l. Number of tubes:84 Tube diameter20 mm Tube length2700 mm Max. temperature90°C Shell capacity133 l. Shell diameterDia. 350 mm Shell length2800 mm Max. temperature200°C Shell connections2x DN50 Information Total height2,80 Floorspace0,70x0,70 mShell and tube heat exchangersKühniHeat exchangers > Shell and tube heat exchangersBrand > Kühni What you can expect from Foeth: -- Machine is in working con ...

General SKU354T1373 LocationBarneveld MakeSchroder Kombinator TypeVEMK 01/108-350 No.11/4053-1-182757 Year of construction2002 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information Total height1,7m Weight380kg CEcheck Floorspace1,7x0,65m Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

General SKU244X191 MakeKöllemann TypeDT KSF 2XDN300 5500 lg No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialMild steel Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm Information LocationBarneveld Floorspace8,0x1,10 m Total height2,0 m Weight2800kg CEcheck Extra Specificationsthe screw is coolableHorizontal screw conveyorsKollemanConveying systems > Horizontal sc ...

This HAAS SL-30 was manufactured in 2008 and comes with a KID80 barfeeder. A robust horizontal turning machine featuring a 22 kW, 3400 rpm gearbox, and a 102 mm bore. It includes a Hainbuch SK80, chip conveyor, tool setter, part catcher, and a KID 80 bar feeder. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30 machine we have for sale. Contact us for more information.

This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information.

This 4-axis KAFO HMC-500 was manufactured in 2019 and features a robust FANUC 0i-F control unit. With a spindle speed of up to 10,000 rpm and a tool magazine capacity of 40 tools, it ensures efficient machining. The machine has a pallet size of 500x500 mm and a maximum workpiece size of Ø700 mm by 800 mm. Consider the opportunity to buy this KAFO HMC-500 horizontal machining centre. Contact us for more information about this machine.

This Kitamura HX500 ia was manufactured in 2008. It features X-Y-Z Axis Travels of 735, 610, and 610 mm, a table size of 500x500 mm, and a spindle speed of 13,000 rpm. The machine includes a BT40 spindle mount, a 50-position tool changer, and a FANUC 16 i MB control system with a 10.4 color LCD. Consider the opportunity to buy this Kitamura HX500 ia horizontal machining centre. Contact us for more information about this machine.

This 3-axis HAAS ST-30 horizontal turning machine was manufactured in 2014, comes with KID80 barfeeder. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this HAAS ST-30 horizontal turning machine. Contact us for more information.

This 3s Kitamura mycenter H400 was manufactured in 2002. It features a full simultaneous 4-axis capability, a pallet changer, and a FANUC 15M control system. The machine has a maximum workpiece diameter of Ø600 mm and a pallet size of 400 × 400 mm. With a spindle speed of 20 – 10,000 rpm and a tool magazine capacity of 100 tools, consider the opportunity to buy this Kitamura mycenter H400 horizontal turning machine. Contact us for further details.

Demonstration device Hand punch incl. 4-piece haulm divider and haulm plate DIMENSIONS Length 840 mm Width 585 mm Height 1120 mm Weight 42 kg