126,652 used machines on RESALE, but how to find them? Machine Search
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 110 mm -Type: unfortunately without type designation -Piston rod: Ø 18 mm -Hole: Ø 13/16 mm / Distance: retracted 470 mm -Dimensions: Ø 65 x 500 mm -Weight: 5.1 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 30 mm / Distance: retracted 430 mm -Dimensions: Ø 70 x 495 mm -Weight: 8.5 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 75 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Holes: Ø mm / Distance: retracted 340 mm -Dimensions: 400/90/H130 mm -Weight: 9.8 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 63 mm -Type: unfortunately without type designation -Piston rod: Ø 28 mm -Holes: Ø 40 mm / Distance: retracted 320 mm -Dimensions: Ø 88 x 400 mm -Weight: 8.2 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 160 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm / M20 -Holes: Ø 25 mm -Dimensions: Ø 70 x 410 mm -Weight: 6.4 kg
Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 185 mm -Piston rod: Ø 20 mm / M20 -Dimensions: 475/110/H65 mm -Weight: 4.5 kg
Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg
Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg
Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: HL width 80 mm -Length: 360 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 360/80/H75 mm -Weight: 3.9 kg
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder -Type: HL width 80 mm -Dimensions: see photos -Quantity: 1x holder available -Dimensions: 180/140/H115 mm -Weight: 2.9 kg
rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg
2-Spindel-Papierbohrmaschine / 2-head spindle paper drilling Hang 136D Serial-No. 71789 Seitenanschlag Side stop for fine adjustment Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Bohrdurchmesser / Drill diameter 2 – 14 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Crane block, crane hook, load hook, single hook -Crane hook: load hook with holder -Load capacity: kg -Hook opening: 32 mm -Dimensions: see photos -Number: 2x load hooks available -Price: per piece -Dimensions: 130/90/50 mm -Own weight: 0.7 kg/pc.
2 Head Wire Stitching Machine Hohner ACCORD 25/40 2-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg
Hot Foil Stamping Tiegel / Heißfolienpräge Tiegel Heidelberg GTP Year 1970 - Serial-No. GTP 66141 Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Range of tools is included in the price
Various milling heads for milling machines and gear cutting machines, hobbing machines
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamp sleeve, sliding gate sleeve, helmet rail branch -Manufacturer: Helmet, branch for helmet rail -Type: Width 65 mm -Dimensions: see photos -Number: 1x branch available -Transport dimensions: 960/390/H90 mm -Weight: 9.9 kg
Pumpe - Bremse für Zylinder - Pump - Brake for Cylinder Heidelberg OHZ KS Year 1959 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VM 55 HD2 / 63W - VZB027B The pump is NEW and fully functional. see pictures for more details.
Heftkopf / Stitching Head Hohner Universal 48/5 S Baujahr / Year 2003 - Serien-Nr. / Serial-No. 495026262 Schmalheftkopf / Narrow Stitching Head Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: L A6VM 250 HD3 / 63W -VZB - B - SO154 Condition : New
Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: AL A6VM 355 HD2D / 63W 2-VZH157D B-S0167 Condition : New
Drilling capacity 45mm Table size : 1200 x 560 mm Drilling capacity 45mm Spindle Holder MK 4 Quill stroke 170mm Speed / Steps 70-2000 rpm Feed / Steps 0.1 0.2 0.3mm/rev Motor 2.9 KW
Inv. Num. : 7814 Type: CWK 800 Producer: Starrag Heckert Created: 2004 Parameters: Control system: Siemens Sinumeric Switch-on hours: 60035 h Hours: 31689 h Work table length: 800 mm Work table width: 800 mm Maximum workpiece weight: 1500 kg Spindle power: 28 kW Machine length: 6330 mm Machine width: 5760 mm Machine weight: 18100 kg In 2021 repairs: Replacement of linear guides and ball screws on the X, Y and Z axes Spindle replacement and ATC cabling Machine geometry ATC Function Test
Inv. Num. : 7815 Type: HEC 800 Producer: Starrag Heckert Created: 2008 Parameters: Switch-on hours: 46529 h Hours: 19542 h Work table length: 800 mm Work table width: 800 mm Maximum workpiece weight: 2000 kg Spindle drive power: 28 kW X-axis travel: 1450 mm Y-axis travel: 1100 mm Travel distances Z-axis: 1300 mm Cone: SK 50 Machine length: 8300 mm Machine width: 5500 mm Machine weight: 27000 kg
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 560 mm -Piston rod: Ø 25 mm -Mounting: Bolt circle Ø 100 x 9 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 790/118/H150 mm -Weight: 11 kg/pc.
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 200 mm -Piston rod: Ø 20 mm -Mounting: Bolt circle Ø 85 x 8 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 440/104/H123 mm -Weight: 8.5 kg/pc.
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece -Dimensions: Ø 83 x 500 mm -Weight: 9.3 kg/pc.
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 250 mm -Piston rod: Ø 25 mm -Hole: Ø 25/19 mm -Pitch spacing: retracted 465 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 530/60/H73 mm -Weight: 5.9 kg/pc.
HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center weight approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 762 mm - maximum workpiece weight: 4536 kg - maximum spindle rotational spee ...
hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209
hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg
HYDRASAN 350 T hydraulic press was built in 2007. There are 2 such machines available for sale. A price included in the offer applies to one machine. Technical specifications of the HYDRASAN 350 T press - maximum press force: 350 t - lower work table surface area (L x W): 1300 x 420 mm - movable table stroke: 300 mm - distance between tables: 400 mm - approach speed: 4.8 mm/s - return speed: 5.1 mm/s - piston diameter (cylinder internal diameter): 230 mm - directional control valve: REXROTH 4WE 10 G33/CG24N9K4 - pump flow rate: 40 l/min - oil tank capacity: 120 l - hydraulic oil gauge: PAKKENS - working pressure: 230 bar - manostat: REXROTH HED 80A 20/350 - electric motor power: 5.5/11 kW - electric motor rotational speed: 1450 rpm - power supply: 380 V; 50 Hz - dimensions of the HYDRASAN machine (L x H): 1800 x 2200 mm
Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg
Hood Dishwasher Hobart UXTLH-A-SEF / UXTLH-10A Year: 2018 - Dishwasher, hood type dishwasher - Manufacturer: Hobart - Model: UXTLH-A-SEF - 400V 50Hz 3/N - 21.6 kW - Year of construction 2018
Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg
Clamping plate, welding table, welding table, marking plate -Width: 450 mm -Length: 400 mm -Height: 50 -with fitting bore and threaded holes: M12 (threaded insert M16 x 1.5) -Weight: 60 kg
Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg
Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MCV 600 -Width: 500 mm -Length: 500 mm -with supporting ribs -with Span Index -Weight: 115 kg
throat: 600 mm tool adaptor: 60,60 SK power requirement: kW flange:: 500x500 mm Width of nail head: 320x300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
