gypsum board used for sale

Press for furniture board Weinig Dimter Profipress 4500-2 fully prepared for sale Connected

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...

I-Max 3D UV Printer, 60x90cm Printable Area, Printable On All Surfaces Flat Or Round On Any Materials: Paper, Wood, Glas, Metal, Tiles, Stone, Rigid PVC Board, Organic Board, Plastic, Leather, Rubber, Special Paper, Porcela, Cancas etc., Print On Object Thickness Upto 15cm, 3 SQM Per Hour (4 Pass), Print On Almost Every Materials, Less Maintainess Cost, Low Ink Consumption Cost, Max. Printing Resolution: 2880 dpi 1440 dpi, Water Cycling Cooling System, CISS Built Inside Ink System, Automatic Height Adjustment With Sensor, Equipped With Vacumm Suction System, Image Format: Tiff, Bmp, Jpg, Eps, Pdf, CAD, Rip Software: Maintop, Photoprint. Ref-NO.: digital-printer-IMAX

Manufacturer: HORIZON Model: Brochure line with 2 towers MC8a, MD8m, SPF 10 II, FC-11, vibrating table Year: 1993 Equipment: 2 towers, stitching, folding, front trimming print counter: unknown Availability: from July 2022 Condition/ Defects: stapling can only be triggered manually, Error on circuit board Price: on request

30 pcs. work cabinets - wooden work cabinets Size: 2500 mm x 800 mm With 8 drawers and storage board

Enko ES 1800 ST Year: 2009 TECHNICAL SPECIFICATION Suitable for the following Materials Solid board : up to 300 g/m² Corrugated and laminated corrugated : 0.5 - 12 mm Cabability specifications: Sheet size : max. 1800 x 1300 mm Min. 800 x 700 mm Cutting pressure : max. (450 t) 4.5 Maximum number of strokes :max. 3000 s/h Dimensions and Weights : Length of machine : approx. 6300 mm Width of machine : approx. 3200 mm Height of machine : approx. 2150 mm Weight of machine : aprox. 24 t Pile height Feeder : max 1200 mm Delivery : max. 1160 mm Technical Data Gripper edge margin, adjustable from : 10 - 18 mm Cutting knife height: 23.8 mm Wood front edge: 27 mm Electrical connected load: 48 KW Electrical supply: 3 Ph 400 V 50 Hz Compressed air required: 6 bar (kg/m²)

Multifoiler BTF 1528 -1400 Rotation Standard machine version: 1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm

SCM MORBIDELLI CX100 High-performance compact vertical machining center for drilling wood boards such as chipboard, lacquered board, MDF, extremely suitable for installation in smaller rooms. Safe and reliable, thanks to the upper clamping unit that provides adhesion to the lower reference, ideal for both flexible and series production. Windows operating system. CAD/CAM software for programming and designing any production processes. Automatic detection of piece dimensions and barcode scanner for greater efficiency and production speed. Specifications; Max. workpiece dimensions: 3050 mm x 900 mm x 60 mm Min. workpiece dimensions: 200 mm x 70 mm x 10 mm X and Y axis speed: 40 - 40 m/min Number of vertical drills: 12 (7+5) Number of horizontal drills along the X-axis: 4 Number of horizontal drills along the Y-axis: 2 Electrospindle milling machine: 5.5 kW - 18000 rpm ...

Width 500 mm Options with board attachment up to 8 mm, for PVA glue Available Direct

Mixer Falterbaum Typ Famix 20000 Capacity: 20.000 ltr./h year of manufaturing: 1992 with Bran & Lübbe dosing pump incl. switch board The machine is mounted on a stainless steel base plate

Used Imac HP 1000 X 2000 CNC punching machine Punching machine Imac mod. HP 1000X2000 with touchscreen CNC and cam software on board the machine equipped with various punches

We sell 140x Alcatel-Lucent IP Touch 4038 extended edition Ice Blue telephone system 1x Alcatel-Lucent IP Touch 4038 extended edition Black telephone system 1x Konftel 300IP PoE (with PSU) conference system 4x Konftel 300IP PoE (without PSU) conference system 6x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD telephone platform, (each w/ Alcatel OmniPCX MIX 4/4/8 and 1x Alcatel OmniPCX GD-3 Gateway driver) 1x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD enclosure (empty) 3x Alcatel Module OmniPCX BRA2 ISDN Access-T0 expansion board 5x Alcatel Module OmniPCX PRA-T2 ISDN Access-EI expansion board 1x Alcatel Lucent Call Server Processing Unit CS-2 expansion board 1x Alcatel OmniPCX MIX 4/4/8 expansion board 1x Alcatel OmniPCX GD-3 Gateway Driver expansion board In most cases, the entire item can only be handed in completely. More information on request ...

- n.10 iron elements including gratings, gratings and more for scrap; elements for air conditioning system; n.1 low steel cabinet with doors Sliding; n.3 pallets of gypsum tiles 500x750 mm; n.10 ad polystyrene arch for concrete castings; n.10 pallets of various bricks including piñatas for floors, tiles, bricks, poroton type blocks of various measurements, type and Marseille tiles; n.3 pallets of tiles for internal/external mm 150x150; n.3 pallets of curbs, both straight and curved for sidewalks; n.1 igloo pallet for ventilated floor; n.4 pallets of self-locking grey concrete of various shapes and thicknesses; n.2 pallets of grey concrete blocks of various thicknesses; n.1 pallet of Cement roof tiles of various colours double Roman type - DEPOSITED IN OVANENGO (BS) - n.5 pallets of self-locking of various shapes and sizes; n. 3 baskets of Horizontal and vertical r ...

Complete AKE band sawmill consisting of: Main machine list Log manipulation RR 700 Feeding for debarking Debarking - Cambio (sold) Reducers Feeding saw line First band saw - make: AKE (vertical) Second band saw - make: AKE (horizontal) Hacker Cross-cut saw Two cutting saws - make: JONSERED Lamellar saw make: WACO Model 130 Special Hydraulic equipment Pneumatic equipment Suction Control system Spare parts inventory Round wood L = 1800 - 4500 Diameter = 100 - 1000mm Board thickness = 16 - 100mm Capacity approx. 40,000 m3 of round timber / year in 2-shift operation with an average round timber diameter of 30 cm The system was installed after a fire damage in 1998 and produced until 2004/2005. Until 2008 only limited use. In 2013, the system was professionally dismantled with extensive documentation to ensure easy installation at the new location. Technicians f ...

Control Board A1

Paxson Loop Slitting Line 72″ x 0.375″ x 50,000Lb (A3754) Make: Paxson Material Width: 12″ – 72″ Weight Capacity: 50,000Lb Thickness: .050″ – .375″ Coil ID: 20″ – 30″ Coil OD: 72″ Line Speed: 850 feet per minute Direction: Right to Left Entry L-Type Coil Car Floor Standing Design Hydraulic Lift & Traverse Self Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Water Cooled Brake Feed-Up Motor Sliding Base Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides 4-Roll Coil Breaker Mechanical Entry Crop Shear Two (2) Slitting Heads Arbor Diameter: 9″ and 12″ Crane Removable Type Adjustable Arbors 150HP DC Motor Drive Multi Speed Gear Lots of Knives and Tooling Two Pro-Eco Scrap Winders Max Thickness: .500″ 25HP Motor for Each Unit Powered Open / Close Pit Cross Over Table Drag Bo ...

Automatic Carton Folder Gluer For Processing Straight Line, Crash Lock, 4 and 6 Corners Style Cartons, Max. Open Blank Width: 1100mm, Min. Open Blank Width: 120mm, Max. Feed Up Length: 1100mm, Min. Feed Up Length: 55mm, Max. Belt Speed: 325m/min, Material: Carton Board Upto 800gsm - Corrugated Upto E Flute, Complete with: - Bottom Belt Friction Feeder, Feeder Belts with Suction, - Vibration System in Feeder, - Left and Right Hand Side Belt Pre Brake System, - Left and Right Bottom Glue Pots, - HHS C 1100 with 4 x Glue Guns, - Servo Motor Operated Back Folding System, - 3 x Belt Carriers in Folding Section, - Batch Kicker Counter, - Heavy Duty Double Frame Trombone Section, - Compression Belt Delivery with Addition Press Belt for Crash Lock Boxes

1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate

Material width max.: 2.500 mm Unwinding-diameter: 1.200 mm Rewinding diameter: 1.050 mm material specification: film from 12 µm, paper + laminates , paper + board 35-250 gr/m2, - exhauster and banana roll - number of slitting / knifes: max 7 reels out / round-knifes - min. slitting width: min 180mm out - max. speed - mechanic/practical: abt. 400 m/min - copy of brochures / drawings - although from feb 1965

Salvagnini P4-1812 + HTP 2015 + R51 CNC Plate Bending Machine/CNC Folding Machine  Technical Data: Maximum Edge Length: 1850mm Maximum Edge Height: 127mm Maximum blank thickness at 400N/mm²: 2.0 mm (standard version) Maximum angle : +/- 135° (depending on tool) Maximum diagonal of the board and panel: 2150 mm Maximum length of the board : 1995 mm Maximum width of the board and panel; 1500 mm Minimum notching distance on the long side: 265 mm Working height: 1090 mm Compressed air consumption at 6 bar: approx. 2 l/min Cooling water requirement: approx. 2 m³/h Cooling water inlet temperature: max. 20 °C Mains voltage 400V 30 KW Mass without oil filling: approx. 16,000 kg Hydraulic oil filling : approx. 600 l Sound pressure level at Bediernerplatz: 80 dB(A) Area requirement LxWxH: 7055 x 6845 x 2500 mm More items in other sizes - new and used - can be found in ou ...

Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Heavy industrial high-performance chiller for the production of slats for glulam and cross laminated timber (vertical zincing) Highlights input: up to 15 different length boards per minute - Inside: milling on both sides, glue application and up to 200 kN pressing force - Output: up to 90m/min production speed (endless strand with vertical zinc) Still in operation at Mayr Melnhof Holz Gaishorn GmbH / Gaishorn am See 182 / 8783 Gaishorn / Austria Available: End of 2022 Visit possible on request. Detailed technical description in the PDF document (as an attachment in the photo gallery).

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

Rip-off saw for cutting waste material (SLABS). Suitable for processing waste after an angle circular saw. Combined woodworking machine for processing waste material. It offers a two-in-one solution. In one pass, the machine cuts a board from a semicircle (slab), which cuts the spreading unit to the desired, quickly adjustable size. The machine can be used for cutting/deburring prismatic materials, but also for waste processing with one machine. The configuration of the machine and its parameters is carried out by arrangement. Technical parameters of the horizontal unit: Main engine power: 2 x 11 kW Feed motor power: 1.1 kW Minimum height of the starting material: 15 mm Minimum material length: 2000 mm Maximum material length: unlimited Maximum height of the starting material: 100 mm Technical parameters of the vertical unit: Main engine power: 2 x 7.5 kW Minimu ...

C.M.S ATOM 5-axis machining center Year 2016 This is a machine for machining soft materials (machinable board, foam) More information under request

Code: 0251 Brand: MASTERWOOD Model: SPEEDY 207- CE Standard Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control complete with interactive graphic programming, 9" video, b ...

Used stainless steel ribbon mixer with a capacity of 3000 LTR by MŁYNPOL model MP-3000. Device for food applications. It has a main agitator and 2 high-speed shredders on the sides. Product loading from the top. Central bottom discharge. Main engine 22 kW. Mixing time 4-5 minutes. Emptying time: 30-60 seconds. Emptying accuracy 99.5%. Rotation of internal mixers (shredders): 920 RPM. Working temperature: -5C to +45C. The device is suitable for the following applications: - spices - sugar, starch - coffee - salt - powder concentrates for the production of ice cream and waffles - powdered sugar, sugar with additives - coffee Tea - cereals - dried fruits - casein - powdered milk - detergents - gypsum, talc - dolomite, cellulose - pharmaceuticals and chemicals - other Dimensions: 5100mm x 1340mm x 1950mm (L x W x H). The device worked on ...

- year of manufacture 2001 -DTR - after HOMAG service - pre-cutter, earning corners - wooden glue up to 9 mm TECHNICAL PARAMETERS: machine tool adapted for machining PVC/ABS flanges veneer up to 3 mm thick and wood stickers up to 9 mm thick pre-cutter - milling the board belt pressure tank with glue, for hot melt glue granules additionally roll for applying glue heated strip tape strip guillotine - pre-cutting veneer 3 pressure rollers 2 ready-made ball cutting units 2 edge milling units (radial cutters) corner earning unit (milling) scraper aggregates - for removing excess glue polishing units .max. element thickness 50 mm Min. element width 60 mm Min. element length 160 mm feed speed 96 m/min total power 10,8 kW extraction connection diameter 120 mm dimensions (L/W/H) 5700 / 1200 / 2100 mm weight 2000 kg

PCB tester with contact pin test, test system ELABO 99-9Z ZM 107011 test system, test system for one-sided testing of SMD boards Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Fabr. Ref. SN0064623 Year of construction 2004 adjacent 2-hand control panel Machine comes from a production shutdown. You will receive the machine exactly as shown, without functional guarantee. For your and our safety: Please take the opportunity to visit. We have even more SMD machines and devices from a German production shutdown. for example:1 piece Variable Width Conveyor NUTEK, NTM410XL-1500-2(S) Year of construction 2011 If you are interested, please ask.; used

For sale is a NOVAPAC 75 M with laminar airflow system which was completely overhauled by NOVAPAC. Format is a 500 gram cup which is closed with a circuit board. In addition to the UV cups and blank disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. Price is a matter of negotiation and the system can currently still be viewed at the customer's premises. A NOVAPAC 75 M with laminar airflow system is being sold, which was completely overhauled by NOVAPAC. The format is a 500 gram cup that is closed with a circuit board. In addition to the UV cup and circuit board disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. The price is a matter of negotiation and the system can currently still be viewed at the customer's.

Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm | label width: 10-150mm | bottle diameter: customized | label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ? 1mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V/380V, 50Hz/60Hz, 750W | machine dimensions: L2400mm?W1500mm?H1400mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are po ...

HEKOTEK Kombi - Sorting system for sawn timber 28 bins Excellent Condition Hekotek Combi - Sorting Plant Capacity: 40000-50000 m3 sawn material/shift/year (operated in 1 shift) 28 electrically driven sorting bunkers min/max board length 2.1/6.4 m Sorting speed 100 pieces/min Stacking speed 10 layers/min Oven bottom 1.5 x 1.5 x 6.05 m 14 knife trimmers, 30 cm increments, 110 pcs/min (22x100 mm) Hard packages min 650 X 650 mm - max 1600 x 1600 mm Specifications The line starts with a double elevator that destacks the boards Sorting station - automatic dimension sorting and visual sorting of dry material Trimmer with 14 blades in 30 cm increments Sorting bags - 28 electrically driven lowering bags with lifts Chain conveyor under the bags for assorted material Trolleys on rails with chains for transporting the material from the sorting plant to the stacking line Step ...

Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min. Minimum cutting leng ...

Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm | label width (backing paper width): 10-150mm | bottle diameter25-130mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 50Hz/60Hz. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Description MOOG ZEUS IMI220-D001 16-channel temperature control board used - from disassembly

Description 24 digital outputs board 24Vdc 2A MOOG ZEUS IMI220-818A001 used - from disassembly

Description Board with 48 digital outputs 24Vdc 0.5A MOOG ZEUS IMI220-816A001 used - from disassembly

Description 48 digital inputs board 24 Vdc/7mA MOOG ZEUS IMI220-810A001 used - from disassembly

Fully automatic paper labelling machine with PLC controlled or touch switch knob control, photoelectric device, variable speed motors and conveyor chain board. - Specifications: label length: 250-600mm | Label width: 65-195mm | bottle diameter: 80-190mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 33 cycles/minute | power: 220V, 50Hz/60Hz | machine dimensions: L2000mm?W900mm?H1500mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are  ...

Description MOOG ZEUS IMI220-830A001 KEYBOARD FDC LCD board used - from disassembly

Description B&R servo board ACOPOS 1045 8V1045.00-2 servo 8AC112.60-1 acopos powerlink interface 8AC122.60-1 acopos resolver interface

Description Microset processor board Mars m510.007.008 ASSEL for disassembly

Available in stock 1 x Used Capstone UCBE ASSY. Complete with User Connection Board (P/N 508598-030). The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

Description Microset analog power supply board Mars m501.006.R1

Available in stock 1 x Used Capstone RFC Controller. Complete with electrical board. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

working table size: 3000 mm x 1300 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 25 m³/h; pump capacity: 0,75 kW; noise level: 70 Db; heating system temperature: max. 60 °C; heating system: 4,5 kW; machine length: 3100 mm; machine width: 1450 mm ; machine height: 1650 mm; weight: 450 kg; The membrane presses of VP series are optimal solution for woodworking and a furniture production from all types of wood. The vacuum presses are equipped with heating system which allows reduce the time of drying glue and increase productivity of production. The heating temperature monitored and maintained automatically. The membrane presses of VP series can be used for small capacities but also for professional using. Construction The sturdy welded construction with a removable feet’s. Work table from 12mm HPL board.   Heating Heating system ...

Description Sandretto board Selec C 00401716 from spare parts warehouse no disassembly

Description HSD P 270 Digital I/O board Campetella replacement from spare parts warehouse no disassembly