gypsum board used for sale

Raimann KD31 double shaft multi-saw - German production - year of production 1988 cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has ...

track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depend ...

cutting width 380 mm cutting height 165 mm disc diameter 300 mm four upper pulling years pneumatic pressure of rollers four lower pull rollers two rows of pawls spindle diameter 70 mm spindle speed 3640 rpm 2 x 55 kW main engine total power 114 kW 550 mm horizontal clearance dimensions of the machine (length / width / height) 220/180/220 cm weight 2940 kg The multi-blade saw is designed for longitudinal cutting of wood with a set of circular saws. It is used for cutting piles into boards in the packaging program, garden program, etc. In this machine, cutting the material is carried out by means of a set of saws mounted on two spindles parallel to each other. The spindles are mounted in a sliding headstock ensuring even load, swimming and wear of the saws after the adjustment. The piles are transported inside the machine by four driven pairs of rollers. The pressing force ...

Multisaw Edger FOD DPPA-II-50-E with lasers – production in Poland – DTR – fixed sleeve - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - power of the feed motor 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electric disc spacing adjustment - fixed edging sleeve 60 mm - one movable shield - two rows of anti-recoil pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 250x165x220 cm weight ~ 2000 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in t ...

Double shaft multisaw TOS SVITAVY PWR 402 440/200 – year of manufacture 2005 – technical documentation – Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm main engines 2 x 55 kW feed motor 3 kW feed speed adjustable on a gear motor five upper pressure rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280 / 245 / 230 cm weight 4770 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle ...

RAIMANN K23 250/120 crawler multi-saw, floating saw – after technical inspection - perfect condition – O&M documentation – movable disc with a fixed sleeve max. cutting height 120 mm max. cutting width 250 mm main engine 30 kW feed motor 1.1 kW feed speed from 5 – 50 m/min max. disc diameter 350 mm sleeve with a diameter of 80 mm shaft with a diameter of 60 mm movable shield min. material length 500 mm dimensions of the work table 800 mm x 1750 mm three rows of anti-ejection pawls feed adjustable on the gear motor central lubrication four pressure rollers from above machine dimensions (length/width/height) 185 / 150 / 220 cm weight 1850 kg Multi-saws are machines used in the wood industry mainly for cutting piles, but also for other purposes. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation i ...

Multi-saw Edger PAUL K34V / 1000 / L 900/100 - after the technical review - very good condition - DTR - perfect for cutting boards - German production TECHNICAL PARAMETERS: cutting width 900 mm cutting height 100 mm 55 kW main engine 5 kW hydraulic pump motor hydraulic feed adjustment hydraulic height adjustment six upper pull rollers six lower pull rollers spindle rest max. blade diameter 350 mm spindle diameter 60 mm sleeve diameter 75 mm two rows of pawls transport dimensions (length / width / height) 400/185/170 cm weight ~ 2200 kg

MS UBS-6-90 circular sawmill - German production - high efficiency - DTR - year of production 2007 - possibility of installing 6 shields - daily capacity up to 200 m3 max. log diameter 390 mm cutting width from 80 to 250 mm width of the additional board from 18 to 80 mm disc diameter 1000 mm electric disc spacing engine power 2 x 90 kW feed speed continuously adjustable 5-30 m / min 4 kW feed motor power length of the feeding table 8000 mm feed table with chain turners dimensions of the cross feeding table 4500 x 7000 mm length of the receiving table 5600 mm dimensions of the corrugated receiving table 4000 x 4000 mm reception of sawdust with vibrorine two lasers total length 18.5 m weight of the sawmill 9.8 tons

Walter WDPP-410 edger The WDPP-410 flashing machine is widely used in many sawmill plants. The design of the machine and the principles of its operation allow for quick recovery of purchase costs and limiting raw material losses to a minimum. Reliable operation and safe operation of the saw translate into a high efficiency rate. – Polish production – DTR, CE min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/m ...

Demag Extra 100-430 injection molding machine Year of manufacture -2004 NC control 4 Clamping force - 1000 kN Column spacing - 400X400 mm The dimensions of the boards are 540X540 mm Min. mold height - 250 mm Screw diameter - 40 mm Injection weight - 208 g Injection volume - 231 cc Injection pressure - 2025 bar Hydraulic cores - 1 Air valves - 1

Injection Weight: 434g Closing force: 2,000 kN Screw diameter: 55 mm Injection pressure: 1650 bar Column spacing: 520x520 mm Board size: 728x728 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 80000h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, ticketing snail

Type: VSC 1-3000M Parameters: 3000x500 mm Manufacturer: AXA Year of production / SO / GO: 2000 / - / - Description: The machine is in good technical condition. Table area: 3000mmx500mm Z axis: 600mm Heidenhain 430M control system Tool magazine 36pcs Heidenhain workpiece probe and tool probe 8 pcs of fully hydraulic vices controlled on the panel Partition wall for 2 workplaces, now a raised board on the left side. Upon agreement, the possibility of a tour in progress.

Machine in good technical condition, possibility of testing by agreement. Hydraulic cutting and punching machine. It can cut flanges up to 500x20 mm, logs up to 40 mm, roxor, squares. Punch the boards with different types of cutters. Ideal for the production of anchor and connection plates. The machine is like new, max. 100 hours worked.With accessories.

Two-way hydraulic bending machine, with CNC numerical control, with two bending jaws and deflection compensation (bombing). Upper instruments segmented. Year of manufacture 11/2008. These are two separate devices: a) material loading, b) double-sided bending machine with a table for feeding material incl. its rotation options. The machine was put into operation in 2009 and was only used for about half a year. It is possible to buy the bending machine itself, or just with the serving table. Bending capacities: material width: 2,500 mm thickness: max. 8 mm (material up to 400 N/mm2) edges with minimum height = up to 6 times the strength of the board minimum radius = up to 1.5 times the strength of the board.

Used Westfalia model SC 35-06-177 stainless steel clarifier centrifuge. Has intermittent solids discharge with self triggered ejection and stainless steel sludge pot. Paring device for light phase, clarifier design. Belt driven by Loher el. motor 18,5 kW/50 Hz/400V/IP55, maximum bowl speed 7270 rpm. Main switch board with integrated control panel included. Rated capacity approximately 20000 liters/hour, the jacketed hood with two coolant feeds Year of production 2000. LABEL: SC 35-06-177 RV: 2000 SN: 1721128 OT. DRUM 7270 RPM FLUID WEIGHT 1.1 KG / DM3 WEIGHT: 1.4 KG / DM3 OPERATING PRESSURE: 6 kPA PRESSURE TANK VOLUME: 0.01 M3 OPERATING TEMPERATURE 80 ° C

MECOF CUTTER MOD. CR15 NC ECS 2301 4 AXES 1 mt BOARD.

Barberan - semi-automatic line for the production and lamination (Honeycomb) of boards equipped with a double-sided PUR hot-melt glue coating machine. The line is ideal for the production of honeycomb panels or furniture doors and for the lamination of all types of films such as PVC, PP, CPL or HPL. The maximum capacity can only be quantified by a specific product. For example, if we talk about doors, the maximum flow rate is two doors per minute. The maximum size of the boards is 1280 mm wide, 2800 mm long and 90 mm high. The rolling process is more continuous and the theoretical production capacity is several million square meters per year. In operation 600 hours. You can see it in operation before disassembly, Seller can arrange transportation.

Plate dimensions: 1550 x 850 mm Daylight opening: 350 mm Number of daylights: 1 St. Heating: ja Total pressure: 60 to Motor output: kW Dimensions (L/W/H): 2,3 x 0,85 x 1,73 mm weight of the machine ca.: 2,5 t Electric 380 Volt: Hydraulic veneer- or board press with printing capacity of 80 t, shutdown when the final pressure output is reached and heating in the lower/upper plate. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paint line for parquet working width 450 mm Varnishing machine 2 positions with dosing and application roller 2nd position with reverse station 3 x motor 0,25 kW, 1 x 0,37kW feed rate: 5 - 20 m/min 3 rubber application rollers 40? Shore available and 1 moose gummi roller Polishing conveyor Suitable for distribution of oil, stain, UV/LED products over the parquet board Conveyor belt: 6000 x 450 mm The machine is equipped with 1 pad unit and 3 brush units 1 x motor 0,75kW, 3 x motor 0,55 kW 4 brushes available Cleaning machine for 3 brushes

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

Rotary table control WEISS GmbH EF0371A 1x Inverter LENZE 8200 vector 0,37 kW in: 230 / 240 V 1AC 50 / 60 Hz, 5.0 A Out: 0 - 230 / 240 V 3AC, 0 - 650 Hz, 2.4 A 1x Drive PLC LENZE EPL 10201 Supply: 24 V DC, 4.2 A Out: 24 V DC, 4x 1 A 1x Extension Board 01 LENZE EPZ 10201 APPL Supply: 24 V DC, 8 A Out: 24 V DC, 4x 1 A, 2x 2 A 1x Control module LENZE EMZ9371BC used, tested ! Dimensions: 250 x 160 x 165 mm

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

Bread Stumper used, year of manufacture not known for Kaiser rolls Completely clad in stainless steel incl. trolley with 20 tipping boards Capacity 39 pcs/min for stud trays 60/80cm

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.

cutting width: max. 330 mm Cutting height: max. 150 mm Saw blade diameter: 550 mm Motor output: 7,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to mini ...

Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 1500 Outfeed roller table mm 1500 Weight kg 350

Spare parts kit SIEMENS 6AV6671-5AE00-0AX0 for connection box DP Basic for Mobile Panels ( MPI/PROFIBUS ) used, tested ! Dimensions ( board ): 120 x 85 x 24 mm Dimensions ( packaging ): 150 x 90 x 60 mm

cutting width: max. 610 mm Cutting height: max. 150 mm Saw blade diameter: 600 mm Motor output: 9,2 kW turning speeds: 2750 U/min Required air-pressure: 7 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system  ...

Inclination switch, inclination sensor, sensor board MBB type B8 1319777 board: 95-596.08-00.00-01/4 spare part for tail lift HUBFIX ! New, with underlays ! Dimensions: 68 x 37 x 44 mm

Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Comm ...

Bobst Media 68 II A2 Age: 1989 Format max.: 60 x 68 cm Min. size: 6 x 12.6 cm Material: Cardboard 100-600 g/m2 or Corrugated board N-F and E-Flutes Bottom Glueing Unit for longitudinal gluing Pressing station Tünkers FAS 480 Delivery packing system Optional: HHS-Glueing System with 3x Glueing Guns

Kälin type KA 250 multi-blade circular saw for sawing, trimming, ripping or grooving boards with accessories and laser., chain width: 250 mm, cutting height: Max. 100 mm

cutting width: max. 375 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw -------------------------------------------------- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to ...

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

Air board lift with 5 air boards for buffering stacks

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC CLASSIC 50 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - New machine from our demonstration room, Bj. 2022 Pos. 1: Classic 50 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW.  ...

Paul KME2 edging saw for edging and splitting boards. Sample image, illustration similar., Roller width: 590 mm, engine: 45 kW, adjustment: hydraulic, More technical data: See PDF

Used brick production line Make OMAG with Teka mixing plant approx. 20 shapes approx. 3,000 pieces of production boards 1400x950mm Used concrete block production plant / pavers production plant Manufacturer: OMAG Teka mixers about 20 moulds about 3000 production boards 1400x950mm

Used brick production line Locksmith SV40 Year of construction: 1994 with lifting ladder, sliding platform, lowering ladder Drying chamber with 3,000 storage spaces approx. 1,600 production plates Used block, pavers, stone manufacturing plant Locksmith SV40 Year of construction: 1994 with lifting ladder, transfer platform, lowering ladder Drying chamber with 3,000 places approximately 1,600 production boards

Code: 0261 Brand: CEMIL - ITALY Model: T 140 M - CE Standard Automatic cutting machine for wooden boards, packaging, window frames, wooden rods and various - CE Standard Technical data: Cutting capacity mm 500 x 140 Blade diameter mm 450 F30 Motor power Hp 7,5 Blade speed/min 3200 Infeed roller conveyor mm 1650 Outfeed roller conveyor mm 1250 Strong workpiece support stop Diameter of 2 suction ports mm 140 Compressed air 7 bar Overall dimensions of assembled machine mm 3500 x 1950 x 1600 h Weight kg 480

BCS Autobox 2600 + Multicut 3, Year 2017,, Max.Sheet width: 2600 mm, Auto set slotting tools, Auto set Creasing tools, Autoset. Tool less size change, Feeder with capacity 300 mm height of blanks, Typical set-time of 1 minute, High speed up to 100m/min, Over 50 Fefco box styles possible, Bmjpclzewxl, Handles singe to double wall corrugated board (max. 10 mm), Touch Screen Control panel for easy programming of new or stored box size and styles

Max. size= 205 x 205 cm, Availability= 012024, Fasson gluing machine Stock type SFAM 716 with display mounting station Suitable for full, shape, edge or strip gluing. A high level of gluing and repeat accuracy of the gluing is guaranteed. Suitable for different backing material - such as open formats, punched blanks, etc. made of corrugated and solid cardboard, rigid foam boards, etc. • Sheet system using driver chains, even for complicated cuts • high register accuracy • Working width: 2,050mm • Performance: 1-lane approx. 4-20 sheets/min; 2 lanes approx. 8-40 sheets/min • Cutting thickness: approx. 0.5 to 20mm • Sheets control • Easy to set and correct the register via the display, even during production Consists of: Fasson gluing machine type SFAM 716 Display work band type 5A/1650 PRESS BAND Type 5/1650_D.4 Mounting station LOT Loaded in truck or container

Pallet rack, heavy-duty rack, high rack, boltless rack, storage rack uprights, single supports, stiffening profile, shelf plates, shelf boards, shelf boards -Storage rack: steel shelf stands and wooden shelves in various sizes -Shelf stands: dimensions 1990 x 500 mm 38 pieces / 2992 x 500 mm 5 pieces -Shelf stands: dimensions 2996 x 600 mm 48 pieces / 1990 x 600 mm 37 pieces -Shelves: 1000 x 500 mm 334 pcs. / 1000 x 600 mm 909 pcs. -Price: per stand 10.- Euro / per floor 5.- Euro -Weight: Stands 5.4 to 8.4 kg/piece / Shelves 5.6/6.3 kg/piece

Year of construction 1999 96 systems No. uiglenia 28 2592 needles Cylinder diameter 30 Single-bearing computerized machine. SFE yarn feeding and MPF positive feeders. Equipped with MER type feeders - for lycra feeding . Additional machine computer equipment : - Power supply board - Several Mag 68k boards for controlling selector selection in individual systems. Additional locks - possibility of acquiring on needles - can be a 3-way machine. Possibility to produce MESZ knitted fabrics. Additional shapers. Operating instructions. Price with loading.

Governing Unit: ... Axis X Strokes: 1000 Y Axis Runs: 800 Z Axis Strokes: 810 Board Length: 630 Width of Board Table: 630 Max Workpiece Dimensions Length X Width X Height Table: D.1050 X H.1000 Spindle Table Surface: Tapped Holes Max Workpiece Spindle Weight: 1500 Spindle Spindle: 6000 Spindle Spindle taper: ISO 50 Torque Cont 10 Min Spindle: Nm X-Axis Rapid Displacement Rapid Displacement: 60000 Y-Axis Rapid Displacement Rapid Displacement: 60000 Z Axis Rapid Displacement Rapid Displacement: 60000 Number Of Atc Warehouse Tools: 160 Max Tool Diameter Atc Warehouse: 250 Max Tool Length From the Atc Warehouse Reference Line: 630 Atc Magazine Tool Selection Method: Fixed Max Tool Weight Atc Warehouse: 30 Kg Atc Warehouse Tool Change Time: 5 SEC. Refrigerant Pressure: 30 BAR Refrigerant Tank Refrigerant: 500L Height Machine Dimensions: 3300 Width Machine Dimensions:  ...

Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Mandrel Uncoiler 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive ...

High-performance planing system Kupfermühle type K43 with inlet and outlet for planing and beveling boards and beams. Consists of: 1. Semi-automatic inlet roller conveyor, length: 10 m 2. Kupfermühle HOMS 410 planing machine 3. Outlet roller conveyor, length: 10.5 m with pneumatic ejector, Working height four-sided: 250 mm, Working height two-sided: 280 mm, Feed planer: max. 30m/min, spindles: 4 + 2 x bevel, 1. Infeed roller conveyor, length: 10 m, working width: 420 mm

cutting width: max. 250 mm Cutting height: max. 80 mm Saw blade diameter: 400 mm Motor output: 3,0 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +-20 mm mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw -------------------------------------------------- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system t ...

Description: Completely overhauled in 2022: New high-voltage generator, high-voltage cable and insulator Electronic control board has undergone a general overhaul by the manufacturer Maintenance carried out in the form of a general overhaul of the X-ray tube. All seals and the target were replaced.  , 180 kV / 20 W high-performance microfocus tube with detection capability of up to 0.5 µm. Brilliant live images thanks to a highly dynamic, temperature-stabilized GE DXR digital detector with 30 images per second (frames per second) 1000 x 1000 pixels Resolution 200 x 200 micrometers. phoenix diamond | window, up to twice as fast data acquisition with the same high image quality Xact version MIL 9.0 Build 12 Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg