gutbrod used for sale

Gutmann + Weyand Filling Machine Gastronomy/Bakery - Manufacturer: Gutmann + Weyand - Operating mode: pneumatic / manual - Suitable for: jams, creams, sauces, doughs and much more - Precise dosage adjustable

A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible.

Inv. Num. : 8504 Type: PH 1022/338 Producer: Gutmann Generated: Parameters: The blasting machine is in good condition.

General SKU239T285 LocationBarneveld CEcheck Main Features Motor18.5 KW Length6500 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter720 mm Length6500 mm Between inlet and outlet5850 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet530x420 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck Information MakeGuttridge Mach.No.0580194-1-1 Year of construction2013 Floorspace7,5x1,8 m Total height1,5 m Weight2800 kg Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBi ...

General SKU239T284 LocationBarneveld CEcheck MakeGuttridge Main Features Motor5.5 KW Length4700 mm Inlet diameter400 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter460 mm Length4700 mm Between inlet and outlet3900 mm Shaft diameter150 mm Pitch325 mm Inletdia. 400 mm Outletdia. 300 mm Motor5,5 kW 400/690 Volt Screw speed89 rpm Outlet height1400 mm Height between in- and outlet1400 mm With coverscheck MaterialStainless steel Information TypeScrew Conveyor Mach.No.580194-3-1 sc6.2 Year of construction2013 Mounted on wheelscheck Floorspace5,8x0,9 m Total height1,4 m Weight1600 kg Extra Specificationswith a rail system Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFo ...

General SKU239T286 LocationBarneveld CEcheck Main Features Motor18.5 KW Length5000 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter700 mm Length5000 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet650x400 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck Information MakeGuttridge Mach.No.0580194-7-1 Year of construction2013 Floorspace7,3x1,7 m Total height1,40 m Weight3000 kg Extra SpecificationsSynatel level control, type digimatic, Schmersal sensors Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectioner ...

Type: CR-030/157BTM Serial number: 108675-001 Year of construction: 2012 Gutter width: 315 mm Gutter length: 1570 mm Stroke: 1 - 5 mm Infeed height: 1470 mm Outfeed height: 800 mm Power: 3 x 400V, 50Hz, 0.3kW Dimensions: 2250 x 1400 x 1700 mm Weight: 217 kg

Gutter width: 315 mm, Gutter length: 1570 mm, Stroke: 1 - 5 mm, Infeed height: 1470 mm, Outfeed height: 800 mm, Power: 3 x 400V, 50Hz, 0.3kW, Dimensions: 2250 x 1400 x 1700 mm, Weight: 217 kg

Automatic dates/olive gutting machine Motor power: 1:5 kw operation mode: Automatic Weight: 350 kg Size : 100 x 1000 x 1000 Output : 150 kg/ Hour Power supply : 380 v Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

Gutter and downpipes, metal elements, wooden parts, various bitumen burners, small tools, tarpaulins, a total of approx. 6 running metres of shelf space, a total area of approx. 17x2 m of floor space, without the previously glued objects

Gutter downpipes galvanised approx. 4 pipes each approx. 300 cm, approx. 3 - 4 pipe parts each 200 cm, plus 2 pipes stainless steel-coloured, other pipes available, but not exactly visible

Total dimensions: L240 x W210 x H70 cm Auction-ID: A1-46623-64

For sale is an extensive measuring station for vascular diagnostics and vein analysis in a neat design. The system consists of a rollable measuring trolley with the COMPACTUS instruments for light-reflection rheography (LRR) and ULTRADOPP 980E for CW Doppler analysis. The set is complemented by a monitor, printer, evaluation unit, transducer, various probes, sleeves, cables as well as extensive accessories and documentation. The measuring station is set up as a complete workstation and offers very extensive equipment for direct use in the field of angiology and vascular diagnostics. In addition, a new CAPTO SP 844 Pressure Transducer is included in the scope of delivery. Overall, the system is clean, tidy and with an extensive range of accessories. Equipment: · COMPACTUS Measuring Device for Light-Reflection Rheography (LRR) · ULTRADOPP 980E CW Doppler Analysis · Monitor / Screen · ...

Galvanized steel

Type: MultiShaker 450/1600 Serial number: E050970405041 Year of construction: 2016 Width: 450 mm Length: 1800 mm Infeed height: 1350 mm Slith: 2 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1900 x 1100 x 1450 mm Weight: 860 kg

Width: 650 mm, Length: 1650 mm, Infeed height: 1070 mm, Slith: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1800 x 1250 x 1200 mm, Weight: 1000 kg

Width: 450 mm, Length: 1800 mm, Infeed height: 1350 mm, Slith: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1900 x 1100 x 1450 mm, Weight: 860 kg

Kroma Gutmaster 1200 for Sale – High Capacity Fish Gutting Machine, For sale: Kroma Gutmaster 1200, a high-performance industrial fish gutting machine, known in the industry as the Ferrari” of gutting systems due to its speed, precision, and reliability., Key Features:, - Capacity up to approx. 65 fish per minute (adjustable speed), - Advanced 16-step system automatically adjusts to fish size, - Suitable for multiple species (trout, mackerel, seabass, seabream, tilapia, etc.), - Precise and clean gutting with minimal manual finishing required, - User-friendly operation with automated positioning system, - Built in stainless steel for durability and hygiene, Specifications:, - Working range: approx. 0.18 – 1.2 kg fish, - Power supply: 3x400V, - Machine length: approx. 5.1 meters, - Single-operator operation, Condition:, Well-maintained and in good working condition. Can be seen runn ...

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

Unwinding, cutting, stacking and depositing on a conveyor belt consisting of: 1x u550 divertler, slicer/stack system c23s25 (middle cut-out) and 1 x conveyor belt tray 2m and an extraction system GR 140.2 x trolley for paper rolls. Specifications: Dispenser u550: Umwinder u550 Outfeedplate Airshaft 70mm/520 Lifting KIT Offline KIT 2 trolleys for the paper rolls Cutting line C23S25: Cutter c23 Middle knife Gutter cut 6mm c20/23 Extraction side trim-c23 v2 Conn.parts Gutter cut c23 v2 Stacker s25: Aassy Automatic stop plate Conveyer/conveyor belt 2000/634 v-speed Extraction system GR 140 Appointment You have the opportunity to inspect the objects before buying. Location Location: Im Schorrenfeld 8 in 76661 Philippsburg-Hüttenheim Disclaimer The sale of used items takes place as the item stands and lies, to the exclusion of any warranty for material defec ...

85,700 litre wine tank/storage tank RSM, round, made of V2A Cat No.: 24-0149 Condition: New Pieces: 5 KK UNI-ACKER Dimensions: Overall height: 12,850 mm Diameter: 3,000 mm Sheath height: 12,000 mm Thickness: Bottom 3 mm Sheath 3-2 mm Lid 3 mm composed of: Flat floor for concrete base 3% inclined incl. ground anchoring ring in accordance with European regulations in the event of earthquakes and storms (parts of the anchor ring must be welded on site by the customer). Nozzle DN100 DIN 11.851 in the lid (for mounting light on the customer's side, light not included) Dome Ø 400 mm in 1.4404 with jointvery stable Solid door Laveggi A4 (edge thickness frame 12 mm) without swivel arm Double-jacketed laser-welded 2xh 1250x9330 à 8.75m2 with parallel connection 2" Connector Thermometer connection NW20 with sleeve Cleaning line NW 50 with connection  ...

Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 100 - 350 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105  ...

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + suitable for medium-sized dough pieces (approx. 300 - 1,100 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 300 - 1100 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 x ...

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

H. Wichelmann mobile coating machine with outfeed vibrating gutter, type: BMA, machine number: 06/838, year of construction: 2006, 10 kW, drum dimensions: Ø 950 mm x 2300 mm, gutter width: 500 mm, s/s screw, diameter: 350 mm, tier: 240 mm, total dimensions: 4500 mm x 2000 mm x 2550 mm, H. Wichelmann filter unit, dimensions: 600 mm x 600 mm x 2000 mm.

used, kpl. 1 year warranty, plate size 800 x 800 mm, 50 plates, closed outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 520 liters, filter area 522, dimensions 5000 x 1400 x 1500 mm, weight5000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 500 x 500 mm, 30 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 115 liters, filter area 12m2, dimensions 3000 x 1000 x 1400 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

cast-ribbed clamping plate with T-swallowtail grooves, approx. 5400 x 2200 mm, water gutters on the face, weight approx. 8 t

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

used, kpl. 1 year warranty, plate size 800 x 800 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 460 liters, filter area 36m2, dimensions 3500 x 1200 x 1500 mm, weight 4000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Siemens Uroskop Access in gutem technischen und optischen Zustand Baujahr 2005 alle technischen Unterlagen und viel Zubehör

Used complete technological line for slaughtering pigs with a capacity of 80 pcs/hour The line consists of the following components: DIRTY PART - Feed pass 1.8 mb with spray and blocking - Restrainer box for BO-4AT deafening - Bleeding tub with rollers 4.5 mb - Conveyor mobile bleeding table - Consumable blood collection device UZK - 2 Z - Differential lift for bleeding track - Synchronizer - Three-shaft brush washer - Self-exuding loop lowerer - Self-pulling loop washer - Photo-cell sink - Single station knife sterilizer - Apron rinser - Hanging scaler 80 pcs/hour heated with steam - Loop extractor - Gantry sealer Super B 80 pcs/hour - Bristle conveyor belt 7 mb - Bath under the bristle brushing machine. - Hood over the bristle scalding set - Exponential table for brushing machine with air curtain - Tubular cleaning table - Bath under the  ...

At Crezta Equipment, we supply complete giblet handling systems designed for hygienic processing, efficient separation, and consistent product quality. Main Equipment Included Gizzard processing units (opening, cleaning, peeling) Heart and liver separation systems Gut reception conveyors Stainless-steel offal transfer conveyors Inspection and trimming tables Giblet washing and cooling units Offal collection bins & pumps Key Advantages High hygiene standards with full stainless-steel construction Consistent giblet recovery and reduced product loss Easy access for cleaning and maintenance Modular design that adapts to any plant layout Reduced manual labour through automated separation and cleaning units Designed for Better Yield and Better Food Safety Our giblet handling equipment is engineered to minimize contamination risks and ensure clean, reliable product separat ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 13 plates + 12 frames, closed outlet, 30 mm cake thickness, pressure max. 6 bar, capacity approx. 35 liters, filter area 4m2, dimensions 1500 x 800 x 1000 mm, weight 700 kg, hand hydraulics, drip plate, filtrate gutter, with or without Filter cloths, also available as a longer frame with more plates and frames

Availability: immediately Location: near Dresden 1 apricot system (temperature control to + 95°C) - Working width approx. 800mm - Overall length approx. 2000mm - Working height approx. 870mm +/- 50mm with stainless handlebars.- Brake castors - Stainless steel frame construction in stainless steel 1.4301 – glass bead blasted - Conical drip plates – return flow apricot tub - Round cord belt transport 2-part with belt stripping in the return - Drive.- Deflection waves stainless steel 1.4301 with driven transfer shaft - Drive station SEW (7-20m/min.) - Stainless chassis with mounted apricot tray approx. 80 Lt. version double-walled with thermal oil filling and electric resistance heating. (Pre-tempering to approx. 60º C). Level query with acoustic signaling. - Product delivery via OMAC rotary lobe pump with downstream instantaneous water heater (electrically for tempe ...

Cologne S Smoking Shelter 2165 x 2500 x 2165 mm Whether on company premises, in public places or in private areas - the Cologne S smoking shelter with access on the right is a reliable choice for a practical and versatile shelter with timeless elegance in the outdoor area. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The stable frame construction made of hot-dip galvanized and powder-coated square steel tube guarantees durability and durability. The steel parts are primed and paint-coated (protection class: C4 medium). High-quality wall elements made of toughened safety glass shield against wind and rain. The canopy is designed in such a way that it can easily withstand even very high wind loads and snow loads (wind load zone I-III/snow load 1.9 kN/m²). Whether as a smoking shelter or as a bus shelter - this canop ...

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...

used, kpl. 1 year warranty, plate size 630 x 630 mm, 50 plates, closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 480 liters, filter area 33m2, dimensions 4300 x 1200 x 1200 mm, weight 2.2 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...

Exzentnerschneckenpumpe von Mono Pumps sehr guter Zustand

used, kpl. 1 year warranty, plate size 630 x 630 mm,25 plates, closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 200 liters, filter area 16m2, dimensions 3000 x 1200 x 1200 mm, weight 1.5 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...

Different gutter ca 150st with and without sieve occupy 800x400mm MVC 50-3 1100x300mm MVC 50-3 1100x400mm MVC 50-3 1100x500mm MVE 50-3 1200x400mm MVD 50-4 with and without sieve 1200x800mm MV 100/50 1200x1000mm MA 220 1200x1500mm Vem 8 1250x400mm MVD 50-3.1 Sieve 1300x1200mm MA 220 1400x650mm MVES 50-1P 1400x800mm MV 100/50 1400x1100mm MA 440 1450x900mm MVES 50-1P 1450x1200mm MVFS 50-2P 1500x400mm MVE 50-3 1500x500mm MS 7.21 Sieve 1500x650mm MVE 50-3.1 1500x800mm MVE 50 1600x400mm MVD 50-2 1600x900mm MVES 50-1P 1600x1200mm MA440 1750x400mm MVD 50-2 1800x500mm MVE 33-1 1800x1400mm MV 900-5 1850x500 MVES 50-1p sieve 1900x900mm MVF 33-1 2000x400mm MVF 50-1 2250x400mm MVE 50-3.1 3350x400mm 2x MVD 50-2 3500x2000mm 2x Schenck DF3 7400x950mm DMW 1000v 7500x500mm 2 Jost ruttler 7500x750mm DF3

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 - overhauled, in gut condition Belt width 600 mm Belt length 810 mm Total length 1360 mm Width 1210 mm Height adjustable from 1010 to 1260 mm Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Bindler & Schneider Type: ZE 90/10-10-F/SL (Gear pump) Year of manufacturing: unbekannt output capacity: 6000 kg /h pieces: 1 different: guter Zustand I offer this machine in as-is where-is condition ex Warehouse Hess. Lichtenau, unpacked