We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,967 used machines on RESALE, but how to find them? Machine Search
used
Description: Max. Cutting capacity 3000 mm Max. Cutting thickness: 12 mm of mild steel S/No. 64674 Internal Reference: ,CBT-032X weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,300 x 2,250 mm
used
Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg
used
Size: 2100 x 2600 mm Equipments: Inner diameter 70, 76.2 152.4 mm Working widths 2100â2600 mm A programmable feed brings the sleeve to the desired length maximum wall thickness 15 mm - are automatically drawn in from the magazine table and centered and fixed on a driven axis The TMA model is an automatic core cutting machine that is easy to operate and works dust-free The cut (minimum cutting width 10 mm) is done with a plate knife
used
Size: 1020 mm Equipments: with PC control Unico used shee cutter Machine speed max 220m / min with register control Calender width 1020 mm Type: Micromatic paper weight : max. 65-120 gram PC and cutting edge control were replace in 2012 cutting accuracy: +/- 0,3 mm Embossing unit year 2005
used
Description: working length: 2500 mm max. thickness of cutting material: 10 ,mm S235, S355 manual limiter adjustment machine is mechanical with a flywheel hydraulic sheet metal presses plate thickness: 10 mm, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,050 x 2,050 mm
new
GUILLOTINE REEL SPLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](https://www.germanplast.eu/listings/4115633-guillotine-reel-s litter) for full description., Force: 50 T
used
Code: 0583 Brand: RAVNE Model: 3700 Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Thickness mm 12
new
GUILLOTINE REEL SPLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T
new
GUILLOTINE REEL SLITTER, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety conditions: 2-hands operation ...
new
Roller splitter type RGS 25, RGS 35 and RGS 50 For the efficient recycling of residual and scrap rolls from the paper/packaging industry, printing companies, etc. The hydraulic roller splitter is suitable for cutting paper, cardboard and plastic foil rolls/balls, as well as for aluminium foil and is mainly used for the recycling of residual and scrap rollers, as well as for the crushing of start-up clumps. The roller cutters are available in various performances in terms of cutting force and roller dimensions. Rolls with a maximum width of 3,000mm and a diameter of 1,200mm can be processed. Special models for processing rolls with particularly large dimensions are also available. As an experience, we offer special material feeding techniques, as well as automated feeding and removal techniques. With regard to personal/occupational protection, we offer optional prot ...
used
Polar 56 ECO Age: 2013 Cutting Width: 56 cm Cutting Length: 56 cm Loading height: 80 mm Ergonomically control panel with 5.5" monochrome display Membrane keypad Memory capacity 198 programs ultra-smooth stainless table surface for an easy handling of the material Light barrier Documentation and tools With 1x extra knife
used
Тypе: MAGURIT FROMAT 053 For frozen meat blocks: up to – 30 C° Dimensions of the meat block: Max. width: 500 mm Max. height: 340 mm Pneumatically operated lifting chute Power of main motor: 5,5 kW Voltage: 400 V, 50 Hz
used
AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...
used
Electric clutch, electromagnetic clutch for guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, eccentric press -for: guillotine scissors crank guillotine scissors -Equipment: clutch, transformer, control -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg
used
Omam second hand line width 2000 mm for PP corrugated sheet extrusion Plastic • Omam extruder diameter 150 mm / 30 D • Main Extruder motor: Siemens DC motor 410 kW • 2-ways continuous filter change FCF 120-2V complete with hydraulic power unit • Melt pump Alfatech AT80 with motor and control panel • Omipa T-Die 2180 mm wide with thickness 5mm and pitch 5,9 mm • Nr.02 T-Dies 3mm thick / 4mm pitch • Caliber with anodized aluminum plates, complete with 5,5 Kw air blades and 3 vacuum pumps 1,1 Kw (x1), 2,2 Kw (x2) • Take-off roller – equipped with 8 rolls, 330 mm diameter, rubber coated, 5 Kw motor • Oven: 2500 mm wide, power 48 kw, infrared, with control unit • Ferrarini & Benelli Corona treatment complete with GTS8 15Khz generator and 2 fans for ozone extraction (0,25hp) • Cooling unit with 6 fans • Take off rollers - 4 rolls, 330mm diameter, rubber coated, 5 Kw ...
used
1) Mechanical guillotine shear COLGAR mod. 3006 Year 1997 length 3050 mm width 32000 mm passage between uprights 250-500 thickness of sharp blades 7 mm 2) Mechanical guillotine shear COLOGAR mod. CS 1520 Length= 1550 mm Blade length = 1580 passage between uprights = 1600 Recess 250 mm. Cutting capacity with sharp blades 22 mm. 3) Mechanical guillotine shear COLGAR CM 3020 Year 1997 Useful cutting length 3050 mm Lamw length 3550 mm Passage between uprights 3465 mm Thickness 22 mm.
used
Guillotine shears, plate shears, plate shears, crank guillotine shears -Mechanical guillotine shears -Cutting width: 2040 mm -Max. Cutting thickness: 2.0 mm -Rear stop -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg
used
The EBA 10/720 Guillotine is a very popular machine within the larger guillotines catergory. This guillotine is programmable and has light beam guards, it runs on 3-phase electric and has all the top quality features necessary on a modern paper guillotine. The EBA guillotines are manufactured in German, made in the same factory as the IDEAL guillotines. High quality German engineering. Program (50 Programs), Air table, Side table with air. Hydraulic driven knife and clamp operation Three-Phase Paper size: max. cutting width 72cm max. depth 720cm Min. Cut width 15mm Min. pile height 100mm
used
Sheet thickness: 13,00 mm void: 0 Table length: 4100 mm Table width: 4100 mm Knife length: 4100 mm MACH-id 5322 MAKE HACO Belgium TYPE HSLX 4013 YOP 2000 SPECIFICATIONS Control Robosoft SC7p Guillotine / Lazer / Cutting table Guillotine Cutting lenght 4100 mm Maximum sheet thickness 13 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 4300 mm Width 2500 mm Height 2200 mm
used
Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 0 mm Knife length: 0 mm MACH-id 5222 MAKE JORG Holland TYPE 4086 YOP 80 er SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3000 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm 1000 mm Power resonator kW / Amp 11 kW DIMENSIONS Length 4000 mm Width 2500 mm Height 1540 mm
used
Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 0 mm Knife length: 0 mm MACH-id 5168 MAKE VOLZ Ozamech TYPE FGH 630 A YOP 2002 SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3000 mm Maximum sheet thickness 6 mm Throat 100 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 3660 mm Width 2750 mm Height 1700 mm
used
Sheet thickness: 6,00 mm void: 0 Table length: 2000 mm Table width: 0 mm Knife length: 2000 mm MACH-id 5167 MAKE VOLZ OZAMECH TYPE FGH 620 A YOP 2002 SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 2000 mm Maximum sheet thickness 6 mm Throat 100 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 2660 mm Width 2755 mm Height 1620 mm
used
Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3050 mm MACH-id 5122 MAKE HACO Belgium TYPE HSLX YOP 2011 SPECIFICATIONS Control Cybelec CybTouch 8 Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3050 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm 750 mm DIMENSIONS Length 3400 mm Width 4000 mm Height 2100 mm
used
Sheet thickness: 8,00 mm void: 0 Table length: 3100 mm Table width: 0 mm Knife length: 0 mm MACH-id 4417 MAKE Gasparini Italia TYPE CO 3006 YEAR 2003 SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3100 mm Maximum sheet thickness 8 mm Backgauge stroke X in mm 1000 mm Power resonator kW / Amp 11 kW Controll DELEM DAC Throat 500 mm DIMENSIONS Length 3300 mm Width 2800 mm Height 1900 mm
new
sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including s ...
new
Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...
used
Sheet thickness: 6,00 mm void: 0 Table length: 3050 mm Table width: 0 mm Knife length: 0 mm MACH-id 4007 MAKE Amada Promecam TYPE GPX 630 YEAR 1992 SPECIFICATIONS Controll Conventionel Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3050 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm 1000 mm Power resonator kW / Amp 5.5 kW DIMENSIONS Length 3600 mm Width 2200 mm Height 2100 mm
used
Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 3000 mm Knife length: 3000 mm MACH-id 5325 MAKE HACO TYPE TS 306 YOP 80 er SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3050 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 3600 mm Width 2100 mm Height 2000 mm
used
Sheet thickness: 6,00 mm void: 0 Table length: 3100 mm Table width: 3100 mm Knife length: 6 mm MACH-id 4149 MAKE DURMA TYPE SB 3006 YEAR 2007 SPECIFICATIONS Controll ENC 100 Guillotine / Lazer / Cutting table Guillotine Maximum sheet thickness 6 mm Throat 350 mm Backgauge stroke X in mm 1000 mm DIMENSIONS Length 3850 mm Width 3000 mm Height 2000 mm
used
Sheet thickness: 12,00 mm void: 0 Table length: 3050 mm Table width: 0 mm Knife length: 0 mm MACH-id 3984 MAKE Amada Promecam TYPE GX 1230 YEAR 1999 SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3050 mm Maximum sheet thickness 12 mm Backgauge stroke X in mm 1000 mm DIMENSIONS Length 3850 mm Width 2380 mm Height 2040 mm
used
Sheet thickness: 10,00 mm void: 0 Table length: 3100 mm Table width: 0 mm Knife length: 0 mm MACH-id 3616 MAKE Promecam France TYPE GH 1030 Z YEAR 80 er SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3100 mm Maximum sheet thickness 10 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 3620 mm Width 2400 mm Height 1800 mm
used
Sheet thickness: 6,00 mm void: 3100 Table length: 0 mm Table width: 0 mm Knife length: 0 mm MACH-id 3505 MAKE Safan Darley Holland TYPE B Schear YEAR 2007 SPECIFICATIONS Controll CNC Touchscreen Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3100 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm1000 mm DIMENSIONS Length 3800 mm Width 2200 mm Height 2100 mm
used
Sheet thickness: 8,00 mm void: 0 Table length: 6000 mm Table width: 0 mm Knife length: 0 mm MACH-id 3449 MAKE Darley Holland TYPE GS 6000 x 8 mm YEAR 1989 SPECIFICATIONS Controll Conventionel Guillotine / Lazer / Cutting table Guillotine Cutting lenght 6000 mm Maximum sheet thickness 8 mm Backgauge stroke X in mm 1000 mm DIMENSIONS Length 6800 mm Width 3500 mm Height 2700 mm
used
Sheet thickness: 13,00 mm void: 3050 Table length: 0 mm Table width: 0 mm Knife length: 0 mm SPECIFICATIONS Controll SC 70 Robosoft Guillotine / Lazer / Cutting table Hydraulic Guillotine Cutting lenght 3050 mm Maximum sheet thickness 13 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 4300 mm Width 2200 mm Height 2500 mm
used
Sheet thickness: 15,00 mm void: 0 Table length: 3200 mm Table width: 0 mm Knife length: 3200 mm SPECIFICATIONS Controll Conventionel Guillotine / Lazer / Cutting table Hydraulic Guillotine Cutting lenght 3200 mm Maximum sheet thickness 15 mm Throat 100 / 400 ? mm Backgauge stroke X in mm 5 - 1000 mm DIMENSIONS Length 3600 mm Width 2300 mm Height 2200 mm
used
Durma CNC 3HAP 60400 Press Brake and Durma AHGM 6016 NC Guillotine Shear Both machines are in good working condition Press Brake : 6050 mm 400 Ton Guillotine Shear: 6000 mm maximum cutting length Maximum cutting thickness : 16 mm
used
Guillotine shears TS S30-6 Year of construction: 1969 Sheet thickness: 6mm Sheet width: 3000mm Depth stop electr. adjustable Front editions available Dimensions: approx. 3400 x 1500 x 1700 mm Weight approx. 7 T Finger/hand protection available Sale without guarantee and without return, the guillotine shears can be tested on site for function.
used
Sale guillotine shears (guillotine) Safan B-Shear 310-6 2013 release in excellent condition, there are all documents on diagnostics and maintenance work performed. Running hours 12 674
new
-Exhibition Machine- DERATECH Practica CNC hydraulic guillotine shears 3050 x 20 mm Available Model VAC-20 x 3050 mm Hydraulic kullissen-guided guillotine shears in robust design Cybelec CybTouch 8 controller Backgauge 1000 mm, foldable Angle stop 1000mm Support arms 1000 mm Knife for cutting VA material with 4 cutting edges Support table with ball rollers DWSQ0E Automatic cutting angle and cutting gap adjustment CE
used
Plate shears, sheet metal shears, sheet metal shears, crank plate shears, guillotine shears -Manufacturer: Fasti, mechanical guillotine shears type 506/20/2 -Cutting width: 2030 mm -Max. Cutting thickness: 2.0 mm -Back gauge: adjustable by hand -Throat: 545 mm -Stroke: continuous stroke / single stroke / tapping -Setup dimensions: 2505/1650/H1150 mm -Transport dimensions: 2505/1100/H1150 mm -Weight: 1200 kg
used
Guillotine shears, sheet metal shears, sheet metal shears, hydraulic shears, hydraulic shears -Guillotine shears: hydraulic -Cutting width: 2580 mm -Max. Cutting thickness: steel 2 mm / aluminum 3 mm -Projection: 540 mm -Dimensions: 3020/2000/H1320 mm -Transport dimension: 3020/2000/1320 mm -Weight: 3185 kg
used
Guillotine shears cutting blade, replacement blade for guillotine shears, replacement blades, cutting blade, scissor blade, tape system cutting device -Manufacturer: Schleicher, cutting device from belt system WV-SYS 160-1050 -Cutting width: max. 500 mm -Number: 1x device available, without partial wiring -Dimension: 900/210/H590 mm -Total weight: 175 kg
used
HERMES, SAIT, MIRKA, VSM Machines for the packaging of abrasive materials. 1. Press for wide belts 2. Press for narrow belts 3. Paper cutter (wide belts) 4. Canvas cutter (wide belts) 5. Guillotine for cutting wide strips to length 6. Guillotine for cutting narrow strips to length 7. Machine for cutting jumbo rolls into narrower rolls 8. Machine for cutting already glued wide strips into narrower ones (eg: 600 mm ï¨ 4 x 150 mm) 9. Press for crushing waste 10. Dust extractor 11. Compressor 12. Machine for applying glue to the tape for joining canvases 13. Machine for gluing endless belts for power tools (blue). Cutting, milling, gluing, cutting papers and abrasive cloths from Jumborola. 1. Paper (jumbo) - 13,105 m (approx. 18,000 m2) 2. Canvas (jumbo) - 5,000 m (approx. 7,000 m2) 3. Canvas and paper rolls 150-300 mm - approx. 18,000 m2 and approx. 7,000 m2
used
Stop for press brakes, bending benches, guillotine shears... -Stop: for press brakes, bending benches, guillotine shears... -Receptacle: M16 x 2 -Dimensions: see photos -Quantity: 2x available -Price: complete -Dimension: 345/175/H115 mm -Weight: 4.2 kg/pc.
used
Roll enlargement and slitting unit The equipment consists of: Walking conveyor Roll turner Unwinder trolley Unwinder Two-position scraper bender Correct-feed rollers Centering rollers No. 1 (RC 8 x 1600) Sheet straightening machine (5x230x1700) Roller conveyor with pressure roller Guillotine shears No. 1 (NNR 10-1700/2) Cleaning device Centering rollers No. 2 Complex for butt welding of strips L-1700-M-Sh Pulling rollers No. 1 Loop table No. 1 Centering rollers No. 3 Pulling rollers No. 2 Centering rollers No. 4 Disc shears Edge-crushing shears NKP 4-500 Roller conveyor idle Loop table No. 2 Separating device No. 1 Pulling rollers No. 3 Guillotine shears No. 2 Device for lane separation No. 2 Winding device Winder assembly Winder pinch roller Folding winder support Winder unloading device Unloading cart Column with rotary console
used
Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...
used
Hydraulic guillotine - Gasparini type CO-2504. Cutting length: 2550 mm x 4 mm, Cybelec DNC 10 CNC control. Full CNC change of the knife angle and the inter-knife gap, set by the computer after specifying the thickness. and length of the material. Cutting programs. Cutting sheet metal in the range of 0.4 - 4 mm. Very large loading depth of 520 mm into the machine body (photos), which enables endless cutting of sheet metal from a roll. CNC stop, departure 10 -1050 mm, retraction, programs. A very accurate and precise guillotine. Machine weight 5 tons. 2 supports and a 2000 mm long angle bracket at the front of the machine. Full original Operation and Maintenance Manual in English, BiHP position manual in Polish. A spare set of new cutting knives.
used
Hydraulic guillotine - AMADA type GPX 630. Cutting length: 3100 mm x 6 mm, full CNC control. Variable angle of the knife and the gap between the knives, set by the computer after feeding the gr. and length of material. Sheet metal cutting in the range of 0.4 - 6 mm. CNC bumper departure 10 -1050 mm, retraction, programs. Machine with automatic support for long sheets of cut sheet metal at the back. Raised rear bumper. Machine weight 6.5 t. 2 supports and an angle bar at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, the main motor only - 5.5 kW. Full original DTR in English and Polish, OHS manual in Polish. The machine is little used, the cutting knives are 95% sharp.
used
Hydraulic guillotine - AMADA type GPN 630. Cutting length: 3100 mm x 6 mm, Variable knife angle and knife gap. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.
used
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 16-310, 3100 mm x 16 mm (ST40) The machine has a quickly changing gap between the knives with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 21 pieces of sheet metal holders. 18.5 kW engine. Weight 12.5 t. CNC bumpers with reading and setting device, bumper travel up to 1200 mm. 2 supports to hold sheets of metal at the front of the machine, and a ruler for cutting at a 90-degree angle. Light line on the material, lighting, central lubrication. electronic cutting length adjustment 10-3100 mm. Single or continuous cutting with adjustable intervals between strokes. Very fast guillotine. Knives 90% new, cutting material from 0.5 to 16 mm. Original OHS documentation and occupational health and safety manual in Polish.