We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,969 used machines on RESALE, but how to find them? Machine Search
used
sheet width: 2540 mm plate thickness: 2,0 mm thickness at Niro-steel: 1,25 mm no. of strokes: 34 Hub/min cutting angle: 1,4° table height: 820 mm distance between columns: 2600 mm Control: konv. engine output: 4,0 kW weight of the machine ca.: 1330 kg. range L-W-H: 2892 x 1865 x 1430 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - extended, extendable support table - freely movable foot switch - Operation manual Special accessories included: - electro-motorized back gauge with analogue position display Fine adjustment via handwheel at the front - Sheet metal holding device for thin sheet metal cuts Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -93253 ...
new
GUILLOTINE REEL SPLITTER 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., AVAILABILITY: STOCK - NEW, Force: 30 T
used
Machine was only in operation three times to test ticks Dough throughput of up to 300kg per hour Dough band height: min./max. 12mm/ 32mm, depending on dough Dough band width: 170mm wide infeed conveyor for convenient dough feeding Dough sheet flour maker with large storage container and adjustable drive for uniform Mehler picture on the dough sheet Touch panel with pictograms for language-independent operation Quick and easy familiarization of the machine thanks to pre-installed standard programs max. 50 programs can be saved Guillotine and punch for maximum product diversity Dough sheet side calibration system by means of innovative vibrating bars Approx. dimensions: Dough sheet machine (WxDxH): approx. 2460x840x1590 mm Poppy seeds (WxDxH): approx. 1450x840x865 mm Item condition: well-maintained Availability: as of now Electrical connection: 3 x 400 V / 50 Hz 0.6 ...
used
Head machine for special square rolls Model: Mini-Rustica GS, with guillotine and punching device incl. 2 longitudinal cutting rollers 3 and 4 rhg. Belt flour for infeed conveyor LED control, Stainless steel Ribbons NEW Machine mobile with brake Connection 400V, 16ACEE plug Dimensions: 1740 x 815 x 1650 mm, WxDxH Machine is cleaned and workshop inspected with 6 months warranty
used
Sheet metal shears, sheet metal shears, sheet metal sheet shears, crank sheet metal shears -Manufacturer: Cidan, mechanical guillotine shears type MS-M 10/3 -Cutting width: 1040 mm -Max. Cutting thickness: 3.0 mm -Back gauge: 500 mm -Throat: 660 mm -Setting dimensions: 1840/1330/H1130 mm -Transport dimensions: 690/1330/H1130 mm -Weight: 880 kg
used
4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from guillotine shears SafanTyp VS 255-4 -Hydraulic valve: Hoerbiger L-VAM220PO6A1P -Dimension.: 450/310/H250 mm -Weight: 19 kg
used
hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer, hydraulic unit from guillotine shears SafanTyp VS 255-4 -Hydraulic pump: Sauer Type 4 P 023 LM 929 -Motor: rotor 5.5 kW / 1450 rpm -Hole distance: 215/140/Ø12 mm -Individual components: see photos -Dimensions: 735/350/H300 mm -Weight: 88 kg
used
Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump -Grease lubrication pump: hand-operated, made from Stankoimport 3218 guillotine shears -Dimensions: 725/200 / H310 mm -Weight: 11 kg
used
Three-phase motor, electric motor -Manufacturer: Volta, electric motor from guillotine shears Stankoimport 3218 -Type: AOC2-52-6 - C1 -Power: 9 kW -Speed: 890 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Dimensions: 570/370 / H315 mm -Weight: 112 kg
used
Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm -Socket: Ø 25 mm -Price: complete -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from Fischer DHS 12/3000 guillotine shears -Piston rod: Ø 140 mm -Stroke: 170 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 270/270 / H565 mm -Weight: 326 kg / pc.
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Manufacturer: Fischer, pressure booster cylinder from Fischer DHS 12 / 3000 guillotine shears -Shaft: Ø 65 mm -Dimensions: 1125/340 / H580 mm -Weight: 326 kg
used
4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from Fischer DHS 12 / 3000 guillotine shears -Type: 4 WEH 32 E 33 / 8LW 220-50 NET -Pressure relief valves: Rexroth type DBW 20 B 2-30 -Dimensions: 560/365 / H335 mm -Weight: 154 kg
used
4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from Fischer DHS 12 / 3000 guillotine shears -Type: 4WEH 22 D 41 / 8LW 220-50 NET -Dimensions: 425/230 / H280 mm -Weight: 44 kg
used
Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg
used
Polycarbonate, plexiglass, acrylic glass, acrylic glass -Plastic panels: transparent -the panels: are covered on both sides with protective film -the panels: can be cut with guillotine shears -the panels: are flexible but not suitable for bending -Length: 3000 mm -Width: 2000 mm -Thickness: 2 mm -partly: slight damage to the edges -Number: 20x pieces available -Price: per piece -Weight: 14.5 kg/piece
used
Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg
used
Stop for press brake, edging bench, guillotine shears ... -Recording with: elongated hole -Length unit: approx. 300 mm -Fine adjustment -Number: 2x available -Price: complete -Dimensions: 2x 410/320/H120 mm -Weight: 28 kg
used
Meatballs machine, schnitzel cutting machine, shaped meat production, shaped -Body: made of stainless steel -cutting with a guillotine (knife). -The meat is pressed into a mold and cut, -then placed on a conveyor bath by vacuum. -Working method: electro-pneumatic -Dimensions: 2600/700/H1730 mm
used
Rondo Doge Cutting Table Year of construction 2002 63cm bandwidth completely stainless steel with calibration head attached Cutting frame with protective grille with bracket for 2 rollers with attached filler#ät with 2 Tichter with adjustable guillotine Speed adjustable Band height 90cm
used
Very good condition sheet metal shear guillotine with little use https://www.baileigh/sheet-metal-shear-sh-5210 This hydraulic shear was one of the machines that got us started and built Baileighâs quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time. 52â length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 5 hp motor runs on 220-volt single-phase power. Up to 28 strokes per minute. Adjustable 24â backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot pedal push. Auto mode: Continue cycling as you hold the pedal down. This hydraulic shear comes standard with high ca ...
used
Colgar guillotine shear - Year of construction 1975 in perfect working order complete with n. 2 pairs of Busch blades, n. 2 Front extensions, n. 1 front team, n. 1 row on the pallet. Complete cutting wire lighting. Table with rollers for support and unloading. Rear register mm. 750 motorized with shot counter. Electrical system. Lubrication system. Electric current operation V. 380/50 Hz. Maximum sheet cutting capacity mm. 4/5. Machine made up to standard.
used
Hydraulic guillotine shear Manufacturer: Ermaksan -wear resistant blades upper knife: two sides; lower knife: four sides - Control unit: CYBTOUCH 6 - 1.000mm rear guide with drive, precision 0.1mm - 1.000mm side ruler and front supports - metric scales - ball screws on the front supports to facilitate the positioning of the sheets - CE approved front, back and side protection plates -light curtains on the back (labor protection) Delivery time: about 4 weeks -Sheet guide system -Automatic hydraulic adjustment of the cutting distance - Silent high pressure pump - Holding springs -adjustable pedal - emergency stop button - shadow line - retractable finger guard - CE certified regulation and conformity Technical data: Cutting width: 2600 Cutting thickness: 6mm Strokes per minute: 24 Number of fasteners: 12 pieces Pressure: 10 to. Main drive: 11 kw backgauge ...
used
We have used Baykal HNC 8116 CNC hydraulic guillotine shears for sale. The shears have a cutting length of 8060mm and the maximum sheet thickness is 16mm The machine was purchased as new and has been working with us since 2014. During this period, the machine was not very usable, we mostly used it to cut sheets with a thickness of 3-8 mm. The meter reading is 3515h Below are some basic information ⢠Welded steel structure providing the necessary rigidity and durability ⢠CYBELEC CNC control with the possibility of programming the bumper, the number of cuts, the cutting angle, the gap between the blades; ⢠Motorized rear bumper driven by a ball screw with a tilting function to enable the cutting of oversized sheets ⢠Protection of the operators fingers from the front of the machine ⢠1000 mm long front supports ⢠Side recess in the 350 mm frame â ...
used
sheet width: 3050 mm plate thickness: 5 mm distance between columns: - mm table height: 750 mm strokes per minute until: 25 - 80 cutting angle: 1° 10´ Number of downholders: 16 total power requirement: 11 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3,4 x 2,6 x 1,4 m Electric 380 Volt: Back gauge motorized: 750 mm Squaring arm withh mm-scale: Support arms: 2 x Shadow line lighting: Cutting lenght bound: Foot switch: Hydraulic guillotine shear in a solid all-welded construction with cutting output of 3050 x 5 mm and motorized backgauge adjustable from the front and readable via counter.The cutting performance refers to sheets with a strength of max. 45 kg/mm². Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Werner & Pfleiderer -Type: Topline -Pastry table with guillotine and lots of tools
used
sheet width: 3050 mm plate thickness: 12,0 mm ST plate thickness: 8,0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0,5 - 3,0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Number of working hours: 18.822 h total power requirement: 22,5 kW weight: 8.500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge with analogue display Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325234 The data for this ad was c ...
used
sheet width: 2020 mm plate thickness: 2,5 mm ST plate thickness: 3,5 mm ALU distance between columns: 2100 mm cutting angle: 2,0 ° no. of strokes: 32 Hub/min weight: 1.180 kg range L-W-H: 2392 x 1865 x 1430 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - 1x stable side stop - 2x front stable support arm - freely movable foot switch - Operation manual Special accessories included: - electro-motorized back gauge with analogue position display Fine adjustment via handwheel at the front - Sheet metal holding device for thin sheet metal cuts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Schneider guillotine shears, steel shears up to 2000mm
used
WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...
used
Perfecta 115 UC High Speed Guillotine Age: 2001 Counter: only 382.601 cuts Working width: 115 cm Color display Programs Chromed Air table Chromed Side Air Tables (Left and Right) Machine comes with 2x knives
used
Guillotine Make Horizon Model APC-T61 Year 1999 Cuttinglenght 610 mm Details Hydraulic cutting Hydraulic clamp Digital readout + programming Light curtain safety Available direct
used
Stop for press brakes, bending benches, guillotine shears... -Manufacturer: HACO, stop with height adjustment for press brake type PPES 30135 -Stop length: 2220 mm -Travel: 715 mm -Individual components: see photos -Transport dimensions: 2440/930/H480 mm -Weight 380 kg
used
Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.
used
Guillotine Make Wohlenberg Model 155 MCS-2TV Year 1988 Cuttinglenght 1550 mm Details Mechanical cutting Hydraulic clamp Digital readout on a monitor + programming Light curtain safety Details with 2 almost new spare knives, sticks, books, knife changing tools, fully functional machine Video
used
Used Filling Monoblock for Wine Bertolaso 15000 BPH 2001 Rinser Automatic CALIPSO 63mm 2 450mm rotary rinser with 63 spray nozzles that penetrate 90mm deep into the bottle 2 channel rinser for steam sterilisation Support structure completely covered with AISI 304 stainless steel sheets AISI 316 stainless steel gripper elements with jaws made of food grade material AISI 316 stainless steel spray nozzles and spray valves Stainless steel drip tray with drain line pressure reducer for rinsing agent total treatment time at 15 000 bph 12 seconds Filler Low vacuum filling machine model ENOICA 72 2800 mm with 72 filling valves Ring bowl completely made of stainless steel AISI 304 bowl bottom with slope filling valves completely made of stainless steel AISI 316 Electric filling bowl height adjustment by push buttons on the control panel of the machine Electronic filling level probe Endress Hauser ...
used
FASTI guillotine shears Effective length: 1030mm Maximum sheet thickness: 2.5mm
new
Guillotine shears type 3000x8
used
1 x Polar 137 XT guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar TR 130ER-4 unloader 1 x LW 1000-4 stack lift 1 x Polar RA-4
used
Pastry line Fritsch Model: Easyline R with dough bowl holder Cutting station with cutting rollers with cutting roller tray Dough Collection Container Dough scraper with guillotine with cutting length adjustment Stainless steel version approx. 6500 mm long Connection 400V, 16A-CEE plug Machine
used
KNIFE GRINDER MVM AF 1500 -Italian made, Year 2001 -Max size 1500 mms. -Automatic grinder will precision grind all chipper, planer and guillotine knives to a length of 1500mm (59 inches) -The knives are held on a electro-magnetic bed and full flood coolant is applied to the grind area so the steel retains its original hardness -Speed control, available immediately -Many grinding tools, all accessories
used
sheet width: 2540 mm plate thickness: 3.25 mm throat: 100 mm no. of strokes: 60.0 Hub/min back stop - adjustable: 530 mm voltage: 400 V engine output: 7.5 kW weight: 2450 kg range L-W-H: 3600 x 1000 x 1560 mm Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Liia packing, banding machine, oven, guillotine, wrapping machine Professional Packing Line - The whole set as the pictures.
used
Thickness range : 0,15 - 3,00 mm Max width : 1.400 mm Raw materials : HIPS - ABS - PP - PE single layer GPPS-HIPS, SAN-ABS, PMMA-ABS double layer Extruders: Main extruder : Diameter 110 mm, 160 kw AC motor, degassing, 7 zone heat control Co-extruder : Diameter 90 mm, 55 kw AC motor, 6 zone heat control Screen changer: Double screen changer, hydraulic Melt Pomp : 600-700 kg / h capacity 15 kw AC motor Feed Block : AB - ABC T die : 1600 mm width - 9 zone heat control Calender group: 3 pcs diameter 350 x 1570 mm high efficiency water cooled cylinder Hydraulic cylinder movement and mechanical lock 3 pcs cooling heat control device Coil winding : 2 pcs AC motor Sheet ...
used
Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.
used
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation
used
Hydraulic guillotine for cutting sheet metal from LVD Belgium type HSL 31/6 3100 mm x 6 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 0.5 - 2 degrees. 9kW motor. Machine weight 4.2 t Bumper departure 750 mm. support for supporting metal sheets at the front of the machine, - ruler 2500 mm long, for cutting at an angle of 90 degrees Original DTR documentation and health and safety instructions in Polish.
used
Hydraulic guillotine for cutting sheet metal by ESPE Strojarne Piesok, type CNTA, 3150 mm x 6.3 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 1 -2.5 degrees, set from the desktop. 11 kW motor. Machine weight 7 tons. Bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3150 mm. 2 supports to hold sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Light line enabling line cutting. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.
used
Hydraulic guillotine for sheet metal cutting by Beyeler Switzerland type VR 10-3070, 3070 mm x 10 mm (ST40). Cybelec DNC10 PS fully CNC controlled machine. The machine has a variable gap between the knives and a hydraulically variable knife angle of 1 - 2.5 degrees, set after entering the thickness and hardness of the material. 18kW motor. Machine weight 9 t. Super-fast bumpers - 1050 mm bumper departure. Electrically adjustable cutting length in the range of 10-3070 mm. 2 supports to support sheet metal at the front of the machine, plus a 90 degree cutting gauge. Light line for line cutting. Original DTR documentation and health and safety instructions in Polish. Infrared protection of the rear working area. The machine is designed for continuous operation - 3 shifts.
used
Hydraulic guillotine for cutting sheet metal from Darley the Netherlands, type GS 3000-10, 3050 mm x 10 mm (ST40). The machine has a variable knife gap and a constant knife angle of 1.5 degrees. 18 kW engine. Machine weight 9 tons. Electric bumper - bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3050 mm. A machine with very small external dimensions. A support for holding sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.