guillotine polar used for sale

Auction-ID: A1-41275-5

Auction-ID: A1-44765-1204

Equipped with Sick walk-in protection Auction-ID: A1-45188-126

Vintage heavy model Auction-ID: A1-45188-142

Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Offer 24206 Specifications: - Max. working width 2030 mm - Max. material thickness at 40 kg/mm² strength 1.25 mm - Backgauge - Space requirement approx. W 2250 x H 1050 x D 750 mm - Weight approx. 700 kg

Equipped with Sick walk-in protection

Weight approx. 12000-15000 kg, cutting capacity for steel 16 mm, cutting capacity for stainless steel 10-12 mm, adjustable back gauge

Vintage heavy model

YAWEI L6SK 6X2500 guillotine shears, built in 2012 in China, are designed for precision cutting of steel sheets with a maximum length of 2500 mm and a thickness of 6 mm. Technical specifications of YAWEI L6SK 6X2500 guillotine shears - maximum sheet metal thickness: 6 mm - maximum sheet metal length: 2500 mm - installed power: 13 kVA - power supply: 3x 400 V; 50 Hz

Maximum cutting capacity: 3100 mm length at 6.35 mm thickness.

With 2x safety wire panel

Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg

Please note! The available forklift cannot load this machine, please bring your own suitable resources

with foot control

Size: 1065 x 1660 mm Equipments: Air table Automatic jogger Plated stainless steel Table size: 1065 x 1660 mm Max sheet size: 1065 x 1660 mm

Cutting lenght 6100 mm Cutting thickness 16 mm

Key data: 2040 mm, 3 mm

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 2300 kg

Offer 24454 Specifications: - Max. cutting width 2520 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - Projection 200 mm - Stroke rate up to 30 /min - Front angle stop 1100 mm - Front support arm 400 mm -Mot. Back gauge 5 - 600 mm - Cut line illumination - Sheet metal hold-up - E – footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm - Weight approx. 3.8 t

Schneidmaschine - Guillotine Schneider Senator Senator 115H Year 2003 - Serial-No. M-115H-013-04/10-03 Schnittbreite max. 1150mm / Cutting width max. 1150mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine - Guillotine Wohlenberg CUT-Tec 76 Year 2005 - Serial-No. 3901-006 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine - Guillotine Wohlenberg 76 SPM Serial-No. 3212-011 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives In einem guten Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Rüttler - Jogger Schneider Senator BR 115 Size 900 x 1150mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cutting machine DSN 700 from the manufacturer DÖINGHAUS Voltage: 3 x 400 V, 50 Hz Power: 2 kW Machine dimensions (LxWxH): 160 x 140 x 170 cm Weight: 550 kg Condition: well-kept, in working order Availability: as of now

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

Manufacturer: Fatosa Type: TBG 480 Year of Make: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum block size: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: Length 1350 x Width 700 x Height 1750 cm With raised front cover - height 2117 mm The guillotine is only equipped with a cross-cutting blade. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

Key data: 2040 mm, 3 mm

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 2300 kg

hydraulic guillotine shear hydraulic CNC guillotine shear with few operating hours and in perfect condition, The Durma VS 4020 is a machine designed for sheet metal processing, specifically a laser cutting machine. Here are some details about the Durma VS 4020 machine: - Laser Cutting Technology: The Durma VS 4020 utilizes laser cutting technology, which is a highly precise method for cutting various types of sheet metal materials. Laser cutting is known for its speed, accuracy, and versatility in creating complex shapes and designs. - Working Area: The "4020" in the model name typically refers to the working area of the machine. In this case, the Durma VS 4020 has a working area of approximately 4000 mm x 2000 mm (or 4 meters x 2 meters). This ample working area allows for the cutting of large sheets of metal. - Laser Source: The machine is equipped with a laser source, which can va ...

Key data: 1250 mm, 13 mm

1250 x 13mm Hydraulic shear

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

Specifications: Max. cutting width: 3100 mm Max. cutting capacity for normal steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable rip fence: 1050 mm CNC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Retraction function Sheet metal holding function Stroke rate: 33 cuts Min. Motor power: 5.5 kW Dimensions (length x width x height): approx. 3800 x 2300 x 1950 mm Weight: approx. 6,5 tons

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity steel St40: 10.0 mm Cutting gap adjustment adjustable rip fence Motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9,5 tons

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Manufacturer: Fischer Rückle, Type: Cut Master, Year: 2007, Control: Fischer Rückel, Cross cutting guillotine: Qeurschneidanlage und Verbindungsmaschine, Cutting lenght mm: 250-2800, Working hight mm: ca.1,5, Digital readout lineal guide: yes, FREE TEXT: verlleimung über Fadensystem, Year :2007

Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

Manufacturer: Jsting , Type: PFS 1800, Year: 1964, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: ca.80, Cutting lenght mm: 1800, Schnittbreite min-max mm: 850, Working hight mm: ca.40, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Year :1964

Manufacturer: Fleck Söhne, Type: DG 46, Year: 2007, Cutting lenght mm: 4600, Year :2007

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968

: Josting, : QD1, : 1981, : yes, : 800, : 45, : yes, : yes, : 1200 x 800 x 1600, : 500, : yes,

Manufacturer: Kuper, Type: QFS 850, Year: ca 1980, Cutting lenght mm: 850, Year :ca 1980

Manufacturer: Josting , Type: QFS 800, Year: ca.90, Program: yes, Pressbalkenöffung mm: 800, Handverstellbarer Laser: yes, Schnittbreite min-max mm: yes, Working hight mm: yes, Alignment light: 5000 X 1200 X1600, Digital readout lineal guide: 2000, Randverstärkung Leimpfaden: mit Automascher Längenerkennung über Luminizenkamera/über Kreidestriche, Year :ca.90