gto numbering used for sale

M. No.: 1683/22

SPARE PART E0033 Drive motor for Heidelberg GTO 46 From 1979 Model Ma No.: 665369 With pulley HDM: 42.101.051 1.5 KW SPAREPART E0033 Driving motor for Heidelberg GTO 46 From 1979 model / serial: 665369 Include disk HDM: 42.101.051 1.5 KW

Buchdruck Nummerierwerke fuer Tiegel - Letter Press Numbering units for Tiegel - Cylinder Suenuem - Leibinger Numbering Units Letter Press Numbering units for Tiegel - Cylinder Div. Zubehoer + Ersatzteile (Nummerierwerke OHT) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 46 + Format (cm): 32x46 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 52 + Format (cm): 32x52 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Indentation unit for SM 74, 520 x 740 mm.

Max sheetsize 250 x 350 mm Speed of substrates up to 4.000 cycli per hour Speed of numbering up to 15.000 cycli per hour Nr. of heads 2 numbering heads Feeder manual, by hand Delivery a table or jogger is suggested

Year of construction unknown Impression unit with numbering and perforating device suitable for GTO 52 4 numbering units, 7 digits, counting forward Perforating device vertically Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Dimensions (L/W/H): 97x83x131 cm accessories and equipment:: 1 for PM 74 and SM 74 +version never ussed! include new rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 460 x 460 mm max. speed: 8000 /h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nummerieriwelle - Numbering Slitting wave Heidelberg MO Year 1990 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Nummerier- Perforierwerk / Imprint unit Numbering- Perforation Unit Heidelberg GTO46 Nummerier- und Perforierwerk fuer Heidelberg GTO46 Imprint unit Numbering- and Perforation Unit for Heidelberg GTO46 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rueckwaerts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwaerts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rueckwaerts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwaerts / convex Forwards -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Nummerier- Perforierwerk / Imprint unit Numbering- Perforation Unit Heidelberg MO Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Eindruckwerk mit Nummeriereinrichtung / Imprinting Unit Numbering Heidelberg GTO52 Year 1997 - SN. 790490 Eindruckwerk / Imprinting Unit Nummerierwelle mit 2 Sitzringen / Numbering shaft with 2 mounting rings 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Size: 520 x 740 mm Equipments: 1 X Inking Unit 1 X Numbering Shaft 2 Perforating arm 2 X Mounting Rings 1 cam left and righ

Size: 480 x 650 mm Equipments: 1 X Inking Unit 2 X Linear Perforating Arms 2 X Mounting Rings 1 X Numbering Shaft

<br>Original numbering work for Heidelberg MO<br><br><br>

1 color Heidelberg GTO 52 +. built in 1991 Varn Kompac dampening numbering and perforating unit 41 million impr. immed. avail. from Germany

- single sheet feeder - WEKO double sheet control - standard dampening units - mat chromed damping distributor - quick action plate clamps - Bacher Registersystem - standard powder spray - +Version - 38 mio. impr.

Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.

4-color R23240/17 SHIKI label printing machine model: PC 45 M age: 1992 web width: 280 mm printing width: 270 mm available: immediately 3 – colour or 4 - colour max. feeding: 7, approx. 180 mm equipment: unwinding unit for reels up to 100 cm diameter rewinding unit for low reels pneumatic line hole punching double-sided speed: 7000 cycles/h max. products: file hole margin self-adhesive labels, file hole margin board labels, tickets with and without printing possible: punching, printing, embossing, numbering, perforating Available: sofort

Printshop from one place in germany as package: guillotine cutters Manufacturer: PolarMohr Model: 92E Year: 1998 Price: on request Lift Manufacturer: PolarMohr Model: L-450-W-1 Price: on request drilling machine (semi-automatic) Manufacturer: Constantin Hang drilling machine (automatic) Manufacturer: Constantin Hang gathering machine with stitching automat Manufacturer: Müller-Langenfeld Model: 620 Year: 1993 Manufacturer: Müller-Langenfeld Model: 91 Year: 1992 Manufacturer: Heidelberg Model: GTO 52/2 Plus Year: 1996 bending machine- Car Manufacturer: Heidelberg Model: Multiplate HDM Year: 1999 plate punch HDM Manufacturer: Heidelberg Year: 1998 Manufacturer: Heidelberg Model: (Creo-)Trendsetter 3244AL folding machine Manufacturer: Steel Model: K66.3/4KTL-FB2 stitching machine Manufacturer: Agrafix Model: BX stitchin ...

HEIDELBERG GTO 52 • Year: 1988 • Size: 36 x 52 cm • Serial: 694596 • Counter: 45.396.545 • Size: 36 x 52 cm • Bacher Register 22 cm • Speed: up to 8.000 sheet/h • checked • cleaned • new rollers Good Working Condition test possible Please ask for quotation: send us an email

Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...

Format 35 x 50 Conventional DAMPENING Numbering Device Ask for price and more info & photos.

Heidelberg GTO 52 1 Standard Dampening Format 36x52cm with accessories

Pressure number approx. 58 mio. Plus version Alcolor Film Humidifier Baldwin Cooling Straight-on machine Still in production

Impression work - Numbering ink to number for Heidelberger Speedmaster SM52 - Printmaster PM52 - very well maintained and little used - Built: 2002 - Colour box with colour rollers - Numbering wave - with 2 seat rings - with 2 - switching arms - with 10 numbering works

Offset printing machine Manufacturer: Heidelberg Model: GTO 46+ 32x46 cm Location: germany Price: on request

M. No.: 664937N // Counter (m): 42 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit

Size 36 x 52 cm Perfecting 1/1, 2/0 + version Powder spray Conventional dampening Numbering and Perforating In good working conditions Free of damages or repairs .

Plus version Size 36 x 52 cm Weko powder spray Conventional dampening Cleaned and checked .

- Standard - Numbering unit - with the existing accessories

Complete printshop from one place in germany: Manufacturer: Ryobi 5 colors Model: 755 (S-5-A) Year: 03-2006 Equipment: aut. Print provision, pallet feeder, oscillating FA IVS equipment, Spectro Pro densitometer serial no. B201004, plate punch Beil, Connection for Foellmer counting tape inserter OK-90 Possibly. Number of prints: 38 million Availability: spring 2021 Price expectations: Defects: none, regular maintenance Manufacturer: Horizon Model: VAC-100A, SPF-200A HMU-100, ST-40, FC-200A, SC-200 Year: 04/2008 Equipment: Small format equipment MS-100, additional blower f. VAC-100, stacking lowering table, manual system HMU-100 Availability: spring 2021 Defects: none Manufacturer: Polar 92 Model: XT Year: 02-2007 Availability: spring 2021 Defects: none, regular maintenance Manufacturer: Horizon folding machine Model: AFC-504AKT Year: bought used 04 - 2009  ...