grasso rc used for sale

GRASSO RC7212E Product number:M15-6041 Cooling capacity:109 kW Refrigerant:NH3 Voltage:400 Volt Motor power:75 kW Dimensions:± 5000 x 2600 x 3000 mm Weight:± 6000 kg Year:2000 Number in stock:1 piece Well maintained Grasso NH3 glycol refrigeration plant for glycol output temperatures until -45°C (109 kW). Consisting of: a Grasso RC7212E two-stage piston compressor (frequency driven), Q-plate (Vahterus) glycol/ammonia flooded evaporator, Baltimore evaporative condenser VCL048G and a control box for the whole plant. Please visit also our website: used-refrigeration

Manufacturer: GEA GRASSO Type: RC412E Year of Make: 1999 Refrigerant NH3 (ammonia) Displacement: 796 m³/h Speed: 1500 rpm Cooling capacity: 325 kW at -10°C/+40°C Engine: 90 kW Drive: Belt drive GEA Grasso RC 412 E NH₃ piston compressor with 90 kW motor Compact, high-performance Grasso 12 series compressor unit for industrial ammonia refrigeration systems. The RC 412 E open 4-cylinder piston compressor – in combination with the 90 kW drive motor – delivers reliable cooling capacities in the range of approx. 325 kW (under typical operating conditions such as -10 °C / +40 °C). Njbn Hoxz Hdiog N U Tswp The machine is fully functional and in very good technical condition. It is therefore ideal for installation in existing NH₃ systems or as a replacement machine.

Used Grasso FKS PP 450/S water cooled chiller on Ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor - 50 Hz - 110 kW - 2970 RPM, brazed heat exchanger as evaporator, brazed heat exchanger as condenser, Grasso oil separator with a volume of 275 liter, oil cooler, oil pump and a control cabinet with a Siemens Simatic HMI controller. Capacity based on a cold water inlet/outlet of 12°C/6°C and a cooling water temperatures of 27°C/32°C. Specifications: Brand: Grasso Type: FKS PP 450/S Product type: Water cooled chiller Capacity kW: 445,0 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Capacity tons: 126,5 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Refrigerant: R717 Weight in kg: 5200 Sizes: 3400x1900x2400 mm (LxWxH) Compressors: Grasso HMR-H36S-28  ...

Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Good

Compressor Pack Make: Grasso Model: 411 Year 2005 Freon Previously used for a 10 ton ice machine Does not include control panel

GEA Grasso reciprocating cooling compressor, type: GRASSO 612E PACKAGE, number: 05081362, year of construction: 2005, PS: 25.5 bar, TS: -10/170 °C, refrigerant: NH3, dimensions: 3200 mm x 1200 mm x 1900 mm. If desired, the concrete base is included, but this is not mandatory, dimensions concrete base: 3000 mm x 2000 mm x 450 mm. Switch cabinet is another lot number, see lot number 8.

type mechanic: IR364-10 type Control: RC30/51 max. load: 10 kg workingrange: 1.500 mm net weight: 264 kg functional checked!

Lieder cream filling machine Speed 20 - 60 pcs / min. Volume 15 ml - 250 ml Induction sealing Capping machine

Type of machine: Semi-automatic dosing machine for loose products Portion: up to 2000g (2l) Accuracy: +/- 5g (available option +/- 1g) Power: 230V, 1 phase Emptying: foot-lever Material: food grade stainless steel Hopper volume: 120l (ca.50kg of roasted coffee) Dimensions(H x W x L): 1808mm x 751mm x 743mm LR 2.3 is designed for dosing such products as: coffee beans, nuts, seeds, grains, rice or noodles. The device is working in half-automatic mode. The operator pours the material to be portioned into the main container, then sets the desired weight and starts the dosing process. After weighing the required amount the operator puts a bag under the funnel and empties the weighing container by stepping on a foot-lever. The next charge starts automatically after the weighing container is emptied. In the meantime the operator ha ...

2 pieces Rheinhütte - pumps

Product number: 1794 Type: Multipack RC11-80 U Serial number: 04AF353 Year of construction: 2004 Capacity: max 80 packs/min .Glue unit: Nordson Problue 4 hot melt Power: 3 x 400V, 50Hz Dimensions: 7500 mm x 1550 mm x 2900 mm

MASSON RCD 800 (W8000) 1216 kW /1600 rpm SN 22123 Ratio 3.538:1 1216 kW 1600 RPM Used in excellent condition Available Mechanical Controls Weight (kg) 1800 Dimensions (cm) 125 X 115 X 140

Kubota RCK 48-G23 intermediate axle mower to Kubota G23, rear ejection, without knife, functional. Further intermediate axle mowers for various Kubota mopdelle in stock.

Offer here two solid vacuum boosters of medium size with 700m³/h nominal suction speed

Grinding machine for machine tools, especially small lathes, etc.

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

HITACHI RCUE50CLG Brand:HITACHI Type:RCUE50CLG Stock number:M23-4664 Cooling capacity:145 kW Refrigerant:R407C Refrigerant Content:1 kg Voltage:400 Volts Power consumption:42,4 kW Dimensions:1088 x 935 x 1343 mm Weight:680 kg Year:2009 New/unused Number in stock:1 piece(s) Price:On request I Description: New unused Hitachi split chiller with 1 screw compressor. Mentioned capacity at a water temperature of +12/7°C and a condensation temperature of +45°C. This split chiller is without a condenser. We can offer a suitable condenser on request. Visit our website: used-refrigeration

Key data: 22 t, 900 mm, 850 mm

Bending cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Centrifuge for lateral feeding of an extruder with flakes / scrap the centrifuge is equipped with a loading tank previous use was on a 100 mm extruder with a conveying capacity of approx. 330 kg for PET flakes at call

Type: RCU200SY-01B Year of Make: 1999 Cooling Capacity: 404kW Refrigerant: R417C RefComp compressor with a capacity of 119kW Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

IMEAS grinding cabin RCI/160 - RCS.2T/160 consisting of a lower and an upper satin finishing machine with two rollers.

length: 6000 mm width: 2500 mm height: 2650 mm weight of the machine ca.: 7,5 t 20” workshop container - seaworthy Various equipment - Roof hatch Weight approx. 7.5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Distance between points: 1100 mm, Center height: 175 mm, Maximum diameter to be rectified: 270 mm, Maximum piece weight: 135 Kg, Working wheel dimensions (od x id x width): Ø508xØ304.8x80 mm, Main engine power: 7.5 Kw, numerical control: Fanuc 21 Oi-T

pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg

Encolleuse Bürkle RCG 700 Bürkle RCG 700 2017 Find more here - /

used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h

ATEX basket centrifuge manufactured by ROUSSELET ROBATEL in 2017, model RC20VXR. Material 316/316L stainless steel Technical features Model RC-20-VXR Year of manufacture 2017 Maximum load (density 1.25 kg/dm³) 2.5 Kg Useful load 2 L Machine motor 400V / 50Hz Maximum speed 3000 rpm Equipment configuration ATEX Feeding pipe Cake washing pipe ELECTRICAL PANELS Lamp Suspension: on inertia plate + silent blocks Dimensions Basket diameter 200 mm Transport information Length 2100 mm Width 1200 mm Height 2000 mm Condition Unused Made by ROUSSELET ROBATEL

A semi-automatic tubular bag processing and sealing station RCM Engineering GmbH is available. Belt width: 108mm, machine dimensions X/Y/Z: approx. 520mm/310mm/450mm, weight: approx. 45kg. Documentation available. On-site inspection is possible.

pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HAVE A GDY SIR; WE VE 1 PC NEW ( OPEN BOX ) RCU 502 KONGSBERG REMOTE CONTROLLER. UNIT AT STOCK REV 2.0.2. F W 1.0.7.3 WE VE 1 PC NEW ( OPEN BOX ) UNUSED RMP 420S KONGSBERG REMOTE MULTIPURPOSE INPUT /OUTPUT UNIT AT STOCK IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

1000KW Cooling Power Sale without guarantee, as is, where is. For more information please sent inquiry

Height=1.95 m, Overall length= 0.85 m, Overall width= 1.3 m, Net weight= 110 kg,

Height=1.8 m, Overall length= 0.87 m, Overall width= 1.1 m, Net weight= 120 kg,

working width: 1150 mm working area:: 5700 m²/Std. total power requirement: 3,0 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,6 x 1,2 x 1,6 m Sweeper with charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BIG CVH 150 Sanitary Container, Dimensions:, 3x2m, Domestic equipments:, - Shower, - WC, - Washbasin

General SKU250X207 LocationBarneveld MakePelletron TypeRC 1 Year of constructionunknown Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4301 (304) Filtercheck Information Floor space0,80x0,50 m Total height1,30 m Weight80 kg Extra SpecificationsRC1 DeDuster® The RC 1 DeDuster® is designed for a product throughput of 10 – 750 lb/h (20 – 350 kg/h) and requires only 12 in (305 mm) installation height. The cleaning air will be supplied through a fan with variable speed control. The dusty air will be cleaned in a compact filter/cyclone combination and returned to the DeDuster® in a closed loop system. The RC 1 is equipped with 3 sight windows. With Globaltek filter suction unit, type BLT520, 1200 watt, 230 volt, dimensions 0,90x0,70x1,60 m Miscellaneous filtersPelletronFilters > Miscellaneous filtersBrand > Pelle ...

Transaction Web cleaning Corona 10 printing stations 10 flexographic printing units 10 paint pumps 1 hot foil 1 Screen print 1 Lamination 1 cold foil fixture 10 Uviterno UV Drying 1 rotate punch 1 Web Video 1 Rewind Printing Accessories: 336 Pressure cyinder 20 speedy whales 4 magnetic cylinders

Centerless grinding machine, PARAGON RC16, 200400 G.W., through-feed grinding, under power in our warehouse (see video)

A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.

Dimensions (L/W/H): 1300x800x1350 mm Weight: 370 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gallus RCS 330– sn11 8 COLORS Age : 10 / 2005 Unwinder 1 meter roll diameter Web breaking detectors Teknek cleaning system Corona Antistatic system 8 printheads with UV ITERNO Ink pumps : 7 Sensotec control register system Rotary diecut ( K1B Gap Master) Knife cutting unit (Tidland) : 2 AVT inspection system Rewinder Webguide E&L Extra ink chamber : 28 available Diecut unit, Matrix rewinder, slitting unit, Camera AVT, rewinder Including 2 tooling sets and 1 anilox set (Extra tooling and anilox to be discussed) Tool List on request