129,006 used machines on RESALE, but how to find them? Machine Search
NEW, 150 cm width, with Lehnhoff MS08 Symlock mount, 196 kg dead weight, suitable for 5.6 - 9 t excavators
Feeder Maber Coater 1 Oven 1st of 10 m and 6 m of coolers and 1 burner New transition system Maber Coater 2 Oven 2nd of 31 m and 6 m of coolers and 3 burners New transitiion system Stacker sizes 1140 x 960 mm.
For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg
pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t distance between columns: 310 mm no. of strokes: 80 Hub/min ram - range of adjustment: 40 mm table surface area: 400x300 mm ram surface: 250x190 mm tool hole in ram: Ø 35 mm table height: 960 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNm PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mm SLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passa ...
Rammax RW1504 - HF trench roller, Technical specifications:, Year of construction: 2005, Operating hours: 3368 h
Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg
(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz
(1973) 180t Gräbener Knuckle-Joint Press Precision Knuckle-Joint Press for Detailed Cold Forming This 1973 Gräbener model utilizes a knuckle-joint mechanism to deliver high pressing force with controlled ram speed, making it ideal for precision coining and embossing tasks. It features a compact design with a 180-ton capacity and is equipped with a 5.5 kW motor for reliable industrial operation. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 180 Year of Manufacture: 1973 Nominal Force: 180t Stroke: 50 mm Stroke Rate: 40 strokes/min Shut Height: 305 mm Tool Holder Adjustment: 40 mm Clearance Between Uprights: 390 mm Table Area (Width x Depth): 370 mm x 450 mm Tool Holder Mounting Surface (Width x Depth): 360 mm x 200 mm Tool Holder Shank Hole (Ø x Depth): 40 mm x 75 mm Motor Output: 5.5 kW Motor Speed: 1,450 ...
(1978) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1978 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Frame Width: 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time: 206 ms Safety Distance: 330 mm
(1979) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1979 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Clearance Between Uprights (Frame Width): 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time (Stopping Time): 160 ms Safety Distance: 266 mm
(1986) 600t Gräbener Knuckle-Joint Press Fully Automated High-Precision Short-Stroke Forming This knuckle-joint press delivers a nominal force of 600 metric tons, designed for high-precision forming applications requiring controlled force near bottom dead center. Technical Details Machine Type: Knuckle-Joint Press Model: GK 600 Nominal Force: 600t Year of Manufacture: 1986 Rated Force Travel (Pressing Path): 1.7 mm Nominal Work Capacity: 10,200 Nm Stroke: 100 mm Stroke Rate: 45 strokes/min Shut Height (Max. Die Space): 360 mm Tool Holder Adjustment: 50 mm Clearance Between Uprights: 580 mm Table Area (Width x Depth): 550 mm x 430 mm Tool Holder Shank Hole (Ø x Depth): 65 mm x 105 mm Motor Output: 15 kW Motor Speed: 1,500 rpm Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, ...
(1979) 360t Gräbener Knuckle-Joint Press High-Force Knuckle-Joint Press for Precision Forging and Coining This Gräbener GK 360 is a specialized industrial press designed for operations requiring extreme force and high-definition detail, such as coining, cold forging, and precision sizing. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Year of Manufacture: 1979 Nominal Force: 360t Stroke Length: 90 mm Stroke Rate: 60 strokes/min Max. Flywheel Speed: 360 rpm Shut Height: 430 mm Tool Holder Adjustment: 40 mm Motor Power: 28 kW (1,475 rpm) Operating Voltage: 380V / 220V, 50 Hz Pneumatic Requirement: 6 bar Overrun Time: 123 ms Safety Distance: 197 mm Total Weight: approx. 6,500 kg
(1988/2025) 600t Gräbener Knuckle-Joint Press Heavy-Duty 600-Ton Precision Forming Press - 2025 General Overhaul This Gräbener GKS 600 is a high-capacity knuckle-joint press designed for demanding metal-forming tasks like cold forging, embossing, and heavy-duty coining. It was manufactured in 1986 and has undergone a complete general overhaul in 2025, ensuring modern reliability while maintaining its massive 6,000 kN nominal force. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKS 600 Nominal Force: 600t Year of Manufacture: 1988 (General Overhaul: 2025) Stroke Length: 160 mm Production Speed: 35 strokes per minute Nominal Energy: 10,200 Nm Nominal Force Path: 1.7 mm Frame Width: 580 mm Table & Tooling Dimensions Table Surface (W x D): 550 mm x 620 mm Ram/Tool Holder Surface (W x D): 550 mm x 430 mm S ...
(1994/2026) Gräbener 360t Knuckle-Joint Press Precision 360-Ton Forming Press - 2026 General Overhaul This Gräbener GK 360 is a high-precision mechanical press designed for specialized metalworking tasks such as coining and cold forging. This unit has been freshly overhauled in 2026, combining its proven knuckle-joint engineering with modern reliability. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Press Capacity: 360t Year of Manufacture: 1994 (General Overhaul: 2026) Stroke Length: 60 mm Production Speed: 60 strokes per minute Frame Width: 460 mm Machine Weight: approx. 6,300 kg Table & Tooling Dimensions Table Surface (W x D): 440 mm x 525 mm Ram/Tool Holder Surface (W x D): 440 mm x 320 mm Tool Holder Adjustment: 40 mm Shank Hole: 65 mm x 105 mm deep
pressure: 100 t dimensions of the machine ca.: 2 x 1,5 x 2 m strokes per minute: 80 total power requirement: 3 kW weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3774 MRS 8 cbm – Motorised two-shell grab year/Baujahr 1998 6.5 t 8 cbm Motorised two-shell grab with electro-hydraulic drive 8 cbm Engine Clamshell Grab with Electro-Hydraulic Drive
pressure: 180 t dimensions of the machine ca.: 2 x 1,5 x 2 m strokes per minute: 60 total power requirement: 3 kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load capacity up to 12,000 kg Grab content from 1 m 3 up to 10 m³ Make: all reputable manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.
Load capacity up to 12,500 kg Gripper content of 0.5 m³ up to 5 m³ Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.
Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 300 mm -Opening width: 1640 mm -complete with: rotary servo -Mounting bolt: Ø 60 mm -Intermediate dimension: 270 mm -Dimensions: 1640/540/H2100 mm -Weight: 690 kg
Crane grab, hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 695 mm -Shovel length open: 1720 mm -Total height: 750 mm -Recording: 59 x 65 mm -Weight: 293 kg
Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm
Load capacity up to 25,000 kg Grab content from 0.5 m² up to 4 m² Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.
Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: 610 to 900 mm -Dimension: 1320/670/H1700 mm -Own weight: 287 kg
Pipe grab, round grab, laying clamp, round material grab, scissor grab -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Grip width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x grippers available -Price: per piece -Dimensions: 700/220/H500 mm -Weight: 25 kg/pc.
Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg
Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg
Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm -Own weight: 59 kg
Working width 190 cm, suitable for Volvo S3 quick coupler, 2300 kg, transport dimensions: LxWxH: 190 x 200 x 130 cm
NEW, 180 cm width, 215 kg net weight, suitable for Euro attachment, Year of construction: 2021
Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: up to approx. 950 mm, see photos -Load capacity: kg -Dimension: 1320/600/H1300 mm -Own weight: 88 kg
Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg
NEW, 180 cm width, 215 kg net weight, suitable for Euro attachment, Year of construction: 2021
Pipe gripper, round gripper, laying tongs, round material gripper, scissor gripper, pipe laying device -Manufacturer: Siegert, round material gripper round pliers type RZ -Gripping range: 50 to 250 mm -Load capacity: 250kg -Dimension: 630/250/H450 mm -Town weight: 11 kg
Pipe grab, round grab -self-locking -Replacement arms -up to approx. max.: Ø 150 cm -Clamping claws -Total weight: 350 kg
Yanmar SV60-A excavator, Technical specifications:, - Year of construction: 2020, - Transport weight: 5,560 kg, - Operating weight: 5,635 kg, - Rubber track width: 400 mm, - Digging depth: 3.91 m, - Engine power: 32.6 kW, - Displacement: 1,995 l
Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!
Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l -Opening width: 1400 mm -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg
For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to
For sale I offer a Tractel grab hoist T532D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request. Dates: - The T 532 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads. - Load capacity 3200kg - Length, height, depth without hook 620x355x130mm - Rope diameter 16.3mm - Weight 24kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope. # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T532 # T500 series # 3200kg # 3,2to
Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Manufacturer: Atlas, clamshell bucket -Bucket width: 400 mm -Opening width: 1520 mm -Total height: 2190 mm -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1520/500/H1685 mm -Weight: 682 kg
Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Clamshell grab: bucket width 300 mm -Opening width: 1665 mm -Total height: 2320 mm -Mounting bolt: Ø 60 mm -Intermediate size: 270 mm, dimensions see photos -Transport dimensions: 1665/360/H1880 mm -Weight: 732 kg
Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg
-For machines 2-5T -Width shells 350mm -Center center shafts 200mm -Width between the ears quick coupler 150mm -New Auction-ID: A3-43534-30141
-For machines 2-5T -Center center shafts 200mm -Width between the ears quick coupler 150mm -New Auction-ID: A3-43534-30139
Width shells 520mm For machines 6-9T New Auction-ID: A3-43534-30140
maximum number of results exceeded
please refine your search
250 € 
