goeckel used for sale

various components, pressure vessel (3 pcs.) a' 720 l

GOEDHART VCI-C-63634 Brand:GOEDHART Type:VCI-C-63634 Stock number:M22-2412 Cooling capacity:78 kW Number of fans:3 Fin spacing:4 mm Refrigerant:Water / Glycol Refrigerant Content:85 l Voltage:400 Volts Power consumption:6,9 A Motor power:3,75 kW Dimensions:4800 x 1070 x 1000 mm Weight:620 kg Year:2008 Number in stock:15 piece(s) Price: Quotation request Description: Nice Goedhart glycol coolers with 3 fans. Mentioned capacity at a water temperature of +6/12°C (in/out) and an ambient temperature of +15°C and 34% glycol. Visit also our website: used-refrigeration

GOEDHART DU-S Brand:GOEDHART Type:DU-S Stock number:M23-2477 Cooling capacity:80.0 kW Application:Freezing / Cooling Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:222 kg Voltage:400 Volts Motor power:3x 3 kW Dimensions:4010 x 2434 x 1050 mm Weight:2,000 kg Year:1996 Number in stock:6 piece(s) Price:Quotation request Description: Good dual discharge Goedhart ammonia evaporator with 3 fans. Mentioned capacity at an evaporating temperature of -38°C and 7K. Visit our website: used-refrigeration

Cool Goedhart Type: VCI-B 82506E Cooling capacity: 26 kW at DT8, 19kW at DT7 Fin spinning: 6 mm Electric heaters Number of fans: 2 x 500 mm Device dimensions: 2450 x 1250 x 700 mm Refrigerant: Freon Capacity: 38 L Stock status: 1 piece Stock number: CH 241 Condition: Used Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

R25716/12 GOEBEL Roller cutter Model: Practica H III Built: 1957 Working width: 1000 mm Rolling diameter: max. 1000 mm Shaft diameter: 70 - 76 mm Round knife Cutting width min.: 15 mm Roll-up diameter: min. 15 mm, max. 400 mm Speed: 300 m/min Available: immediately

R25716 / 12 GOEBEL reel slitter model: Practica H III age: 1957 width: 1000 mm diameter unwinder: max. 1000 mm diameter core: 70 – 76 mm system: circular knife min. slitting width: 15 mm diameter rewinder: min. 15 mm, max. 400 mm core diameter: 12 mm speed: 300 m/min Available: sofort

Internal threading machine Hagen & Goebel type HG 124 Masch. No. 4112 Year of construction approx. 1980 Cutting capacity M 3 to M 18 in brass M 3 to M 10 in steel projection 250 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kW Mains connection 380 volts, 50 Hz - 6 speed levels via belt change (3 steps via belt + 2 engine speeds) - Table height adjustment with rack via hand crank on the round column - without guide cartridge - Drill chuck 1 to 13 mm- Tool holder 25 mm cylindrical shaft holder Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg good condition; used

Goebel OPTIFORMA 520 Year 1985 Size: Width 520mm Unwind 5 printing units wet offset 4 bays in 25 inches Filing Hole Cross Perforation Cylinder Display: roll/roll roll/fold Machine is in production

Tapping machine Hagen & Göbel HG 16 C 12/16 1.950 € VB Pick-up only 39114 Saxony-Anhalt - Magdeburg 01.03.2023 3 Description Offer Tapping machine Hagen & Göbel HG 16 C 12/16 with coolant tank/pump without quill guide spindles and the tool holders (Fig. 1-6) The machine is sold to our customer due to a business change. It is operational and functional as far as it works. Manufacturer: Hagen & Goebel Soest Type: verm TB C 12/16 Ref. 2226 Year built:1993 Cutting capacity: depending on the material 4-56 mm at 14-28 m/min see performance plate Drive power: 3AC 380 V, 41.1/7.1 A 1.2 kWQ Engine: KBA 100 A 6 Coolant tank: approx. 25 l gesch. Cooling center pump: TB40/220-x 380V, 0.25 A, 12 kW, 2700 1/min, 50 l/min Accessories: no Dimensions: approx. HxWxD 1500 x 990 x 1400 mm Weight: approx. 750 kg estimated Condition: used see photos The machine is stil ...

Air cooler, cold store, refrigerated container, cold cell, heat exchanger -Manufacturer: Goedhart, air cooler without fan -Fan: diameter 500mm -Slat distance: 10 mm -Housing: made of stainless steel -Dimensions: 2270/1080/H680 mm -Weight: 224 kg

Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

GOEBEL U7 SLITTER-REWINDER, overhauled in 2010, working width 3.600 mm., materials min 20 max 95 gqm, for paper, board, tissue, core Ø on mother reel 76/152 mm., unwinder: max reel diam.1.450 mm, rewinder: max reel diam.1.200 mm., Slitting: minimum5 mm.on 76 mm core, average speed 1.000 m/min., web guiding unit, shear slitting system, very good conditions, (the yellow table before unwinder is no more avialnle), WORKING WIDTH: 3.600 mm. 141.73

GEA Goedhart evaporator, 3 fans, type: DPA 043 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P0912020, year of construction: 2012, dimensions: 1800 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 062 D HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P054216049, year of construction: 2007, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 1 fan, type: SPB 061 D HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P164710627, year of construction: 2007, dimensions: 1000 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P263132683, year of construction: 2003, dimensions: 2000 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 35-F32 HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P0715018, year of construction: 2015, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 35-F32 HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P5114058, year of construction: 2014, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 35-F32 HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P0715018, year of construction: 2015, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 45-F52 HOCHLEISTUNGS-LUFTK CO2 45 bar, manufactering number: 10110809, year of construction: 2015, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P315409515, year of construction: 2007, dimensions: 2500 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P263132683, year of construction: 2003, dimensions: 2000 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P263132683, year of construction: 2003, dimensions: 2000 mm x 1000 mm x 300 mm.

Working width / working width 1550 mm

Abrbeitsbreite / working width 1250 mm

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: 140 mm Working height from to: 20,80 mm : endlos mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 printunits (1x possible copy stop) We have printing cylinders of : - 24" - 23" 2/6 - 25" Max web width 520 mm Rol to Rol Also, the following parts: - Cross perforating cylinder : 2x 24" - Jump perforating rings - Ranking rings : 4x 24" + 2x 25" - Pinfeed rings : 2x single + 2x double

thread dia.: 3 - 10 mm Tools speed: 120 - 600 U/min table-size: 250 x 350 mm throat: 250 mm voltage: 380 V threading length: 80 mm total power requirement: 0,55 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,7 x 0,7 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Göltebodt quick-change holder 21 x 300107 € 100,-- 3 x 300114 € 100,-- 1 x 300125 € 150,-- 1 x 300105 € 75,--

thread capacity: M 16 threading depth: 80 mm throat: 250 mm table-size: 400 x 500 mm spindle turning speed range: 9: 280 - 1800 U/min quill stroke: 80 mm thread capacity: min. M 4 mm dayligth: 315 mm spindle taper: B 18 thread capacity: in Alu: M 22 total power requirement: 2,2 kW weight of the machine ca.: ca. 200 kg dimensions of the machine ca.: xxxxxx 0,86/1,17 m Condition: ready for operation: CE signed: Electric 380 Volt: Base: Automatic thread cutting machine in table design, threads with conductive cartridge, single and continuous stroke, tap breakage protection,switching from ri- to le-running via double friction clutch that means only the work spindle will switched, pole-changing motor, faster return, column height adjustable, intervention protection secured by a magnetic switch. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM  ...

Pot hinge drilling machine, fitting drilling machine -Number of drills: 8 pieces -Brill: in opposite directions - Right-hand drill holder: O 10 mm - Drill holder on the left: O 11 mm -Drawing drilling pattern with the photos -Weight: 150 kg

Air cooler, cold store, refrigerated container, cold store - Equipped with: 2x fans -for refrigerant: Eth. Glycol 35% -Cooling capacity: 28.7 KW -Air output: 12,900 m³/h -Area: 149 m² -Slat spacing: 10 mm -2x fans: 520 watts 1350 rpm -Fan diameter: 500mm -Electric defrost -Housing: made of stainless steel -Drip tray -Number: 2x cooler available -Price per piece -Dimensions: 1100/2340/H700 mm -Weight: 318 kg

Air cooler, cold store, refrigerated container, cold store -Quantity: 1x fan -Fan diameter: 500mm -Slat distance: 10 mm -Housing: made of stainless steel -Drip tray -Dimensions: 1200/1450/H720 mm -Weight: 186 kg

Air cooler, cold store, refrigerated container, cold store -Cooling capacity: 12.5 KW -for refrigerant: Eth. Glycol 35% -Air volume: 8250 m³/h -Area: 94 m² -Coolant: ETH. Glycol 30% -Fan diameter: 500mm -Slat spacing: 10 mm -Drip tray - Quantity: 1 piece -Dimensions: 1700/1200/H970 mm -Weight: 232 kg

Air cooler, cold store, refrigerated container, cold store - Equipped with: 2x fans -for refrigerant: Eth. Glycol 35% -Cooling capacity: 28.7 KW -Air output: 12,900 m³/h -Area: 149 m² -Slat spacing: 10 mm -Number: 2x fans 520 watts 1350 rpm -Fan diameter: 500mm -Slat distance: 10 mm -Housing: made of stainless steel -Dimensions: 1200/2300/H720 mm -Weight: 254 kg

Air cooler, cold store, refrigerated container, cold store -for refrigerant: Eth. Glycol 35% -Fan diameter: 500mm -Slat distance: 10 mm -Housing: made of stainless steel -Drip tray -Number: 3x cooler available -Price per piece -Dimensions: 1100/1450/H720 mm -Weight: 184 kg

Air cooler, cold store, refrigerated container, cold store - Equipped with: 2x fans -for refrigerant: Eth. Glycol 35% -Cooling capacity: 28.7 KW -Air output: 12,900 m³/h -Area: 149 m² -Slat spacing: 10 mm -Housing: made of stainless steel -Number: 1x cooler available -Price per piece -Dimensions: 1100/2300/H720 mm -Weight: 320kg/pcs

Air cooler, cold store, refrigerated container, cold store - Equipped with: 3x fans -for refrigerant: Eth. Glycol 35% -Cooling capacity: 55 KW -Air flow: 28,960 m³/h -Area: 262 m² -Fan Diameter: 500mm -Slat spacing: 10 mm -Housing: made of stainless steel -Drip tray -Number: 3x air cooler available -Price per piece -Dimensions: 3570/1100/H940 mm -Weight: 534 kg/pc

Air cooler, cold store, refrigerated container, cold store -Quantity: 3x fans -for refrigerant: Eth. Glycol 35% -Fan diameter: 500mm -Slat distance: 10 mm -Housing: made of stainless steel -Drip tray -Dimensions: 3320/1100/H720 mm -Weight: 500kg

Air cooler, cold store, refrigerated container, cold store - Equipped with: 4x fans -Cooling capacity: 70 KW -Air flow: 39,673 m³/h -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500mm -Slat distance: 10 mm -Housing: made of stainless steel -Drip tray -Number: 2x cooler available -Price per piece -Dimensions: 4550/1100/H940 mm -Weight: 600kg/pcs

Specifications: Tapping capacity M 10 – M 45 Cutting capacity in ST M 36 Recording MK 2 Motor power 4 kW Speeds 35 – 185 rpm

Dimensions (L/W/H): 660x1050x1600 mm metric thread: M 33 Messing metric thread: M 16 Gußeisen metric thread: M 14 Stahl no. of flutes: 25x10mm 2x T-Nuten throat: 220 mm weight: 730 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 0 Number of milling agregates: 3 St. Spindle diameter: 50 mm Weinig Unicontrol 10-5, built in 1993 Slotted spindle 6 x 100 mm 2 profile spindles length 320 mm, stroke 95 mm Fitting spindle with folding device with return and discharge device Weinig Univar 10 with olive drilling rig, built in 1990 3 spindles each 320 mm long, stroke 95 mm + Fitting milling device Götzinger SFM, built in 2011 -------------------------------- Milling machine for the locking parts in the frame with 4 mm clearance + Drilling corner bearing Includes tools for Weinig Unicontrol: Zuani Tools IV 68/78/90 wood, 68/78 aluminum 4 mm clearance -------------------------------- For sale on behalf of the customer ex location Machines are currently still in use -------------------------------- (Technical information according to the manufacturer - no guarantee!) The data for this ad was created wi ...

Description: tapping machine Thread diameter 3 - 10 mm Tool speed 120 - 600 rpm Table size 250 x 350 mm Projection 250 mm Operating voltage 380 V Thread length 80 mm Total power requirement 0.55 kW Machine weight approx. 0.35 t Space requirement approx. 0.7 x 0.7 x 1.9 m Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,900 mm, weight approx.: 350 kg

We sell slicer, fully automatic vertical sausage cutter, of the German brand GRAEF, model VA 300. Made of stainless steel and anodized aluminum. Ideal machine for automatic slicing depositing stacked in the form of staggered. It has different ways to set working speed. Graduation of the thickness of the manual slice. Equipment completely rebuilt and overhauled by GRAEF technical service. Stainless steel cutting blade of 300 mm diameter. Product tray measurements: 420 mm long x 220 mm. Machine dimensions: 900 mm x 670 mm x 560 mm high. Cutting thickness: 0 to 10 mm infinitely variable Cutting length: 210mm Cutting height: 175 mm Cleaning and maintenance applications are developed with ease. Power 230V, 50Hz, 0.5Kw, 2.4 A . IP33 Weight: 75kg. Slicer, semi-automatic slicer, meat cutters, industrial meat cutters, industrial slicer, meat machinery, sausage machinery, food slicer. I ...