glue used for sale

Make Jori machine Model JBT50/4D Year 2018 Speed up to 1.800 cycli per hour Book thickness 3-50 mm Min book size 160 x 120 mm Max book size 450 x 300 mm Cover material 80 - 300 gram Block preperation Milling station with dust extraction Glue system Hot melt glue with 2 application rollers and side glue Cover feeder Automatic airfeed with nipping Foot print 3500 x 1520 mm

Gluing machine Sumbel Senator 1000; good condition; cleaned and tested; Working width 1000mm; cold glue; Upper glue unit with 2 rollers; Pressure roller for cardboard and cardboard; Speed adjustable; Delivery strap 75x205cm. Gluing machine Sumbel Senator 1000; good condition; cleaned and checked; working width 1000mm; for cold glue; top side gluing with two rollers; pressure roller device for processing of paperboard and cardboard; spedd adjustable; delivery belt 75x205cm.

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

Labelling machine NEWTEC 4T 2S 2E + SL Year 2010 (never worked) Counterclockwise direction Speed: 2.500 bph N°2 adhesive station to apply front and back labels NEW N°1 cold glue station to apply L” seal Manual adjustment height heads Manual regulation glue Speed adjustment by inverter Clamps to iron L” seal N°1 glue pump Safety protections

bottling line AVE - 2005 speed: 2.500 bph for sparkling wine 3.000 bph for still wine. Depalletizer GP ENGINEERING mod. COMPACT 52 Filling monoblock isobaric AVE 24.24.6: Rinser 24 clamps single treatment - fixed nozzle Filler 24 valves with pre-evacuation and self-leveling Corker 6 head natural straight cork and mushroom cork. Caps orientator AVE Bottle washer/dryer CAMES mod. W DT 3/8 Capsuling machine ROBINO & GALANDRINO mod. FENIX 2 suitable for pvc and polylaminate capsules Labeller AVE adhesive and cold glue mod. 12T 4S 4E suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING mod. ISOLA 700: Box forming machine - american box Case packer single head with adjustable head Hives inserter AVE Box closing machine above and below hot glue AVE Palletizer GP ENGINEERING mod. PABR 50 Wrap pallets semiautomatic AVE Le ...

2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.

CNC-controlled drilling, gluing and duebel insertion machine Also suitable for drilling furniture connectors due to 3 controlled axes A video of the running machine can be sent on request. Working width max. 1250mm, for double occupancy 600mm with pneumatic center stop 4 pneumatic workpiece clamps Horizontal drilling unit with 3 individually retrievable drills, motor power 1.5kW Vertical drilling unit with 3 individually retrievable drills, motor power 1.5kW X-axis, Y-axis, Z-axis cnc-controlled As a result, quick changes between different material thicknesses are possible. Dowel length 30 and 35mm, currently set to 8x30mm Vibrating conveyor for wooden dowels Glue monitoring Glue quantity electronically adjustable Glue feed via double diaphragm pump Beckhoff controller with Industrial PC and colour screen Programming via WoodWop 5.0, with variable programming Work li ...

Made in Germany Bj 2007, Max web width 430mm Max speed up to 100m/min depending on roll size Max number of crush knives 12 4 winding spindles 76 core 4 winding spindles 40 core, Compressed air 6 bar Web tension via dancer arm motors all with servo drive control via BDF terminal. PLC control type Panasonic glue roller Glue to the core and seal the roll with hot glue Accesories Automatic feed pot for pods

Wood Her Auriga 1308 FÜ + PU compact design - edge thickness 0.4 - 8 mm PLC screen control Edge Control PPC 221 color screen Pre-milling unit for joining in front of the gluing part Edge magazine fully automatic for rolls and strip goods Glue Application Station GLU JET Cartridges + PU Gluing - Multisystem + Glue application using nozzle technology Workpiece height 6-65 mm Auto. Glue height adjustment Printing unit 1912-3 pneumatic Cross-cut unit 1918 pneumatic for rolls and strip goods up to 8 mm edge thickness with pneumatic adjustment from 0-10° inclination of the cross-cut saws Milling unit 1827 MOT 4, flush milling 8 mm, radius milling - bevel milling - 15° 1827 MOT NC axes via control panel Mould milling unit 1832 pneum. Rounding of corners up to edge thickness 3mm in the run Drawing blade unit 1929 for chamfers and radii with 2 drawing blade carriers via control p ...

Nominal capacity: 18000 Fl/h, Control range: 25000 Fl/h, Current: 16 A, Voltage: 400 V, Formats: 0,5 l NRW, 0,5 l Euro and 0,5 l clip-lock, Machine partitioning: 8 glue palettes, sixes gripper for labels, 16-piece bottle table (diameter: 640 cm), Running direction: parallel (from right to right), Operation / Control: Siemens S7 SPS, Features: 2 cold glue units, each with one glue pump, electric height adjustment, breakage detection, operating hours counter, preparation for integration of an inkjet datiing system, mechanical adjustment for clip-lock bottles

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Edge height max. 65 mm Edge thickness max. 20 mm Strip cross-section max. 20 x 55 mm Fixed workpiece protrusion in post-processing incl. Edge material 38 mm (max. edge thickness 8 mm) In the case of strips or edge thickness > 8 mm, the output is in of post-processing 30 mm + strip thickness Post-processing is then only possible with the following units: possible: cross-cut and milling unit 08.055 and grinding unit Feed speed 6 - 30 m/min. Roller support rail extendable up to 700 mm Machine length 9,300 mm IMATRONIC 121/01 with system software for operating the Edge banding machine Compact PC in industrial design Electronic height adjustment of the upper pressure Inlet ruler axis-controlled Milling unit 08.376 with 2 motors of 4.5 kW each, in the Working in sync or counter rotation Infrared emitters for workpiece edge preheating Gluing unit 283.151 ...

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Fully Automated Perfect Binder & In-Line Three Knife Trimmer, 4 Clamps Perfect Binder with EVA/PUR Gluing Unit from SM-Klebetechnik GZ3530 included 5m Long Hot Glue Hose , AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0.3 to 65mm, Cover Weight Range: 81.4 - 302.4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1.350 Cycles/Hour (with PUR 1.000 Cycles/Hour), Horizon Melt Tank Stand S-470, M-No. 305011, TriCreaser, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Horizon Stack Lifter SL-40, M-N ...

Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 805 Gathering Machine, AGE: 2016, Basic Frame with 16 Gathering Stations, Gathering For Folded Sections And Single Sheets Possible, Mechanical And Electrical De-Coupling Of Each Station Possible, Air Center Vacuum And Compressed Air Supply For Gatherer, Reject Unit AS Raceway/Transfer, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder, Perfect Binder: Kolbus KM 600, AGE: 2016, 21 Clamps With Co-Pilot Touchscreen, TFT Visualizing Monitors With Graphic Operator Guidance, Milling/Brushing, Equalizing Milling, Notching And Brushing Units, Kolbus LH370 EVA Hot-Melt Pre-Melt Unit, EVA Hot-Melt Roller Type Spine Gluing Unit On Mobile Base, PUR Spine Glue With Nordson Pre-Melter, EVA Hot-Melt Side Glue Unit With Controlled Cut-Off, I.R. Heating In Radius For Increased Glue Open Time, RA 49.A Pile ...

Labeling Machine Krones Contiroll WrapAround 36000 bph Fully operational WrapAround OPP labeler Krones Contiroll Solomatic for plastic and paper labels feed from two rotating reels and glued with hot melt glue. Labeler was manufactured in 2007 and it has two label applicators, both with two label reels with automatic splicing from one reel to another. It is suitable for labelling glass, plastic and metal containers with wrap-around labels. Two narrow strips of hotmelt, which are applied by a heated glue roller to the leading and trailing label edges, glue the labels together. Container plates are driven by a toothed belt and servomotor. This machine has been used for 500ml PET bottles only but it can be adjusted for 500ml to 2000ml bottles as well, max diameter being 105mm. Control PLS are Siemens Simatic S7 series with color touch screens. Technical characteristics Manufactur ...

Used Labeler Cavagnino Gatti CG 84 FR 3 8 3000 bph Year 2001 For flasks of 150 mm in diameter These Cavagnino Gatti rotary wet glue labelers are capable of production speeds from 4 000 to 9 000 bottles per hour with applications throughout the wine beverage food chemical and household industries The CG84CR DR FR series of machines are the result of an innovative design that has allowed for a reduction of components of the labeling unit which has resulted in important advantages in terms of economy ease of use changeover time and maintenance This series of C G machines are available with either the standard bottle platform motion by double profile cam in an oil bath or by programmable servo platforms MP These labelers can be equipped with various optical and or mechanical spotting systems for the automatic alignment of printed capsules glass cartouches side and bottom notchlugs silk scree ...

Used Casepacking Monoblock Oma 2007 This machine is an OMA Monoblock composed of a case erector and case packer Oma brand case erector with hot glue closure Nordson glue heater Vertical cardboard formation Form 2 cartons of 6 or 1 of 12 with or without the hive inside Case packer with mechanical movement Possibility of forming and packing various carton formats Painted iron frame Accident prevention protections Production about 320 boxes of 12 and about 600 of 6 The machine is in accordance with CE 2007 with manuals In excellent condition Dimensions The machine is divided into 2 parts The first part forms and closes the bottom part of the cardboard with hot glue Front 2 500 mm Width 2 100mm Height 2 500mm Weight about 700 kg The second part for cartoning machine Front 2 000 mm Width 1 900mm Height 2 700mm Weight about 900 kg [...for more information send your inquiry to the seller.] refn ...

Used Labeling Machine Cavagnino Gatti 1999 The Cavagnino Gatti CG 80 is a used labeling machine manufactured in 1999 This high speed labeling machine offers exceptional performance and reliability for various labeling applications With its advanced features and sturdy construction it has become a preferred choice in the industry Key Features and Specifications The CG 80 model is equipped with five heads enabling efficient labeling operations It boasts two front and back adhesive stations as well as a glue station allowing for versatile labeling options The machine operates in an anticlockwise rotation ensuring smooth and precise label application A notable feature of the CG 80 is its rotating plate with Malta crosses providing stability and accuracy during the labeling process The entire machine is enclosed in stainless steel ensuring hygiene standards and durability Safety protections a ...

HEIBER & SCHROUDER Model: CE 850 Year: 1999 Blank length: min 100 mm Width of the blank with 4 glue points 600 mm (1 track)/ 347 mm (2 tracks) Width of the blank with 8 glue points 500 mm (1 track)/ 347 mm (2 tracks) Materials c cardboard from 200 g/m² upwards, microwave Description Conical/clamshell box forming machine Fire HEIBER & SCHRODER Model – CE850-2 two-track Machine with 850 mm clearance, two plates, two forming towers, 8 glue points

Used Labeling Machine Cimec Cold Glue Up to 4000 BPH Year 2020 In the industrial bottling sector choosing the right labeling machine is crucial for ensuring efficiency and quality The machine stands out for its precision and reliability Technical Features of the Labeling Machine Cimec Produced in 2020 this second hand Cimec labeling machine model ETC COLLA LN is designed for speeds up to 4000 bottles per hour BPH This reflects the unit s high productivity The formats that this labeler has worked are 0 33l 0 25l and 0 70l Furthermore its linear rotation direction combined with the cold glue labeling method ensures precise and uniform label application Indeed this is essential for maintaining high visual quality of the finished product Adjustments and Safety Despite the absence of automatic head adjustment the machine allows manual label adjustment Therefore it offers flexibility in produc ...

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

- With two wet gluing stations - With 5 positions of glue pallets - With 5-position gripper rollers - Hull etiquette - Chest/vintage etiquette - Back label - Two glue pumps with glue heating - Label pressing station, at the outfeed conveyor - Only about 400 operating hours per year! - Machine in very good condition

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: machine number 0-261-20-6375 edgeband thickness max 3 mm thickness of coiled edgeband max , ,  ,3 mm feedrate max 10 m/min corner rounding unit 1 motor scraper unit , ,  ,Profile scraper control , ,  ,BRANDT EASYCONTROL EC 10+ edgeband height max , ,  ,54 mm workpiece length min , ,  ,70 mm preheating zone , ,  , glue system granulate glue pot below feeding chain quick-change glue pot , ,  , trimming saw 2 motors flush/radius/chamfer milling units , ,  ,1 buffing unit , ,  , magazine for single strips , ,  , type right-side machine supply 400 V/230 V, 3 phases, 50 Hz max. operating full load current 8 A, fuse 16 A control voltage 24 V , total connection , ,  ,5,5 kW  , serial number: 0-261-20-6375, edge thickness:  ...

Cartoner, make Mohrbach, type MB PCT, year 2015, Possible folding box formats:, 92 82 95mm and 92 82 75mm, Function description, Machine for erecting and gluing boxes of flat blanks, as well as filling the boxes, lid molds and lid closing., The magazine supply for the cardboard blanks is monitored by 2 photocells. One is used to warn, at minimum cutting and the second, the machine switches to malfunction when only a few are left, There are blanks in the magazine., A cardboard blank is removed from the inclined magazine by means of a vacuum feeder, into which, Transport guide rails stored and with feed bars horizontally over the folding tool, transported. Here, the blank passes the glue station, where hot glue is applied to the cardboard blank, is applied., After the blank has been transported over the folding tool, it becomes vertical from the, working push-in ram pushed through the  ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Pressure with rubber belt NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Constructor model : RT20 motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine no. positions 6 Gluing system yes glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping Constr ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Max. forward feed speed 24 m/min Top pressure , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit Constructor model : RT20 automatic timed intervention : , motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine , no. positions 6 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.37 KW r.p.m. : 12000 RPM NO. EDGE PROCESSI ...

Description: Position: 1 SubFamily: Edgebander BATCH 1 Brand: BIESSE Model: STREAM B1 10.5 MDS Type of edging Thin edge Thick edge Gluing System EVA Hotmelt  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , Premilling Unit , Corner Rounding Unit Grooving Unit , Maximum panel thickness 60 mm Max. panel height 60 mm Min. panel length 150 mm Min. panel width 65 mm Min. edge thickness 0.3 mm Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , MDS No. Panel Sizing / Milling units Unit : pre-milling unit automatic timed intervention Edge coil magazine , no. positions 12 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , no. pressure roller 4 with positioning by NC , No. Edge Process ...

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be defined serial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x ...

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change de ...

Description: Max. panel height 50 mm Min. panel width 70 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 10 m/min Pressure with idle wheels Panel support guides NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Edge coil magazine Gluing system glue pot for EVA hot melt glue Roller set to press the edge no. pressure roller 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : glue scraping Control system PLC Safety standard CE mark Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight ap ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Max feed speed 9 m/min Maximum panel thickness 50 mm Operating Units 4 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 9 m/min Top pressure yes Pressure with idle wheels Panel support guides yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : glue scraping Safety standard CE mark yes Total installed power 3.5 KW  ...

Contour edge bander Fabrikat: VITAP Type: BC91 EVO Demonstration machine Technical data: - For straight and curved pieces (convex and concave) - To glue pieces thickness 10-60 mms., in PVC, melamine, veneer, plastic laminate and solid wood - 2 glue spreading rollers - Cutting guillotine up to 3 mm. thickness - Encoder for high precision cutting of the tape ( for shaped closed pieces) - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece - End switch tape cut (only for straight pieces) - Feeding speed adjustable from 3mt to 20mt per min. - Solid Phenolic table easy to clean and with no transmission of heat - Manual / Automatic band cutting device - Glue pot (kgs. 3), with electronic adjustable heating system -Tilting table 0°-45° - Standard accessories - CE standards

If you are interested we will send you photos! MACHINE DESCRIPTION: The MAS tray packer is a packaging machine that folds and glues an open tray (from a cutting) around the product formation. FORMATION: The machine sets 2 x 5 = 10 Tetra packs per tray. Machine dimensions: 3500-4500mm long depending on infeed conveyor. 2008mm width; Height 2000mm Performance: max 10 trays/min Electrical connection: 5% 50 Hz, 3-phase, 230/400 volts, approx. 8kW Energy consumption: 6 kWh Frequency 50 Hz 2% active power 1.18 kW Volume < 80 dB Electrical equipment: brand products, in accordance with standard MAS machine no. 6017, built 06/2006 Cabinet: Make Rittal V2A firmly installed on machine Pneum. Equipment: Make Festo Glue device: Nordson (3.6 kg tank capacity) with 2 hose system; Glue order volume with proportinal valve Compressed air: 6 bar (dry, oil-free) Air consumption: approx ...

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

The STOCK LM 1235 / 1250P litho laminating machine was manufactured in 1995 by the German company Stock Maschinenbau GmbH. The laminator is used for wrapping cardboard with thin paper in order to obtain a decorative, aesthetic packaging. Labels with a format (length x height) of 250 x 250 mm are glued on cardboard sheets with a maximum width of 1250 mm and a length of 1235 mm. The LM 1235-1250P litho laminating machine is equipped with: pressure roller, sensor for detecting and registering the stuck label, or the gluing unit with automatic glue supply. Technical data of the STOCK LM 1235.1250P litho laminating machine - lamination length: 1235 mm - laminating width: 1250 mm - label format (length x height): 250 x 250 mm - semi-automatic machine with a label dispenser - manual label feeding table - single sheet - gluing unit with automatic glue supply - sensor for detecting and  ...

Displacement 3.33 ltr., power 55 kw/74 hp 36/36 speed manual transmission with hydraulic reversing gear and powershift stage Vmax 40 km/h All-wheel drive can be switched on, automatically engaged during braking, Differential lock both axles (front self-locking) Front power lift FOLGER Cat. II + + ports dw Hydraulic connections 3 x dw at the rear Tyres 320/85 R20 AS (12.4 R20 glue) front, co-steering fenders Tyres 420/85 R30 AS (16.9 R30 glue) rear Rotating 6 work lights, auxiliary main headlights for winter service use Air-sprung Grammer Comfort driver's seat with armrests Air conditioning, Recirculation, Radio, Passenger seat PTO 540/540E, speed accumulator, with external switch on the rear fender Rear power lift Cat. II with high-speed hooks, Automatic pull mouth, height adjustable in grid rail Glass roof cabin with sun visor, interior spies, exterior mirrors ca ...

Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension

Aggregate repairs for any type of KRONES cold glue aggregate. Any spare parts for cold-glue units. Please enquire. We offer complete overhauls in-house at fixed prices within a week.

450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding W ...

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Wet glue labeling machine Langguth E 32 for buckets and canisters incl. glue pump and vibrating magazine very good operational condition, directly from production!

Casing-in machine Zechini Model Gamma Year 2000 Working width 420 mm Thickness 100 mm (electrical adjustable) Details After order machine shall be completed with new side dams, new glue bin, and new glue adjustment gears Available Direct

Continuous plank gluing press Suitable for hardwood wood thickness: 11 to 45 mm. Max wood length 2600 mm Gluing bed length: 6 m. Cross-chain transport Angle transfer and loading in the press with side glue, PVAc glue press with bed 1.58 x 10 m., hot water heated, Bohqqiku Hydraulic unit with 15 kW, v-outlet saw cross saw with running Mechanization available for sizing Disrun Vakumm Stacking Device

Carton erector, Bedo – second-hand - : Price from location: 29.500.- € (net)! Manufacturer: Bedo Type: VA 1195 Year of construction: 2006 two cardboard magazines Machine number: 1195.1.6684 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar With Nordson ProBlue 4 Adhesive Melter 4 Litre Hot Melt Glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area Manufacturer's text: Series 11 up to 20 cartons per minute Folding crates according to FEFCO 0201, 0200, 0209 and others all types of corrugated board Carton closure by means of hot melt glue, self-adhesive tape or gummed tape small to very large carton formats one or two cardboard magazines motoric/pneumatic mode of operation no format parts

Hongming HM-600E + PK850 Automatic Case Making machine for Book Cover or rigid box The automatic case maker is made up of two models: the HM-600E and the HM-PK850. When these two machines are used together, they form an automatic case making line. 1-Hongming HM 600E Book cover + box glueing and positioning machine Age: 2021 The Automatic Rigid Apparel Box gluing and positioning Machine is an automatic multifunctional equipment for high precision positioning of hard cover and premium rigid boxes. It is suitable for mass production of a variety of rigid boxes such as jewelry boxes, mobile phone boxes, gift boxes, cosmetic boxes, watch boxes, chocolate boxes and some special rigid boxes, etc. Features: 1. Suit to all kinds of rigid box for positioning 2. Suit to all kinds of hard cover for positioning 3. Computer control for all parameter setting 4. Auto error stop and displ ...