glue used for sale

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electr ...

Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018

Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015

Manufacturer: Bürkle Leimauftragsmaschne 800 mm, Type: DAH, Control: no, 4 roller machine: 4, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 800, Working hight mm: 890, Diameter of roller coater mm: 240, Supply roller diameter mm: 180, Roller cleaning system: no, Main engine kW: ca.5,5, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: möglich über Umrichter, Through running machine: yes, FREE TEXT: Maschine muss überholt werden,

Manufacturer: Hymmen , Type: TLA, Year: ca.1990, 4 roller machine: yes, Work piece width min-max mm: 30-1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3-120, Diameter of roller coater mm: ca.230, Year :ca.1990

Manufacturer: Bürkle, Type: DAK, Working widht max mm: 1420, Diameter of roller coater mm: 238,

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997

Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WS Year 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screen The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc.

Hymmen glue application machine 4 Roller Glue Dispensing Machine Type LA 4W Working width 1300 mm 2 rubberized fluted rollers The rubber lining/fluting is in poor condition See pictures 2 rubberized smooth rollers Ribbed rollers diameter 230 mm Smooth rollers diameter 180 mm Maximum passage height 100 mm Application speed 10 and 20 m/min. Motor power 1.1 kW Emergency out of leverage Dimensions 1950 mm x 1100 mm x H 1150 mm Weight with pallet 1300 kg Machine is function-tested Sale in actual condition

1 x folder gluer Kama ProFold 74 Basic : PLC with 8 control channels (Omron), colour touch panel Hotmelt system with 4 channels, 2 nozzles Job Planner Software Suction belt feeder – Top loader Transport module with rollers (280 cm long, approx.. 110”) and patented grid system for tool attachment Delivery unit with pressing roller (180 cm long, approx. 40”) 1 set pressure rollers (2x11wheels, 4x6, 2x3, 1x3s, 2x1) 14 pcs cross-beams, 28 pcs tool-fasteners 1 tipper fold plate including 2 blowing nozzles 1 pair of short plough fold devices with pneumatic flap for short flaps 1 pair of long plough fold devices incl. a pair of folding blades 6 pcs guide wires with special holders 1 x folding & gluing edition : set of pressure rollers (1x7s wheels, 2x6, 2x3, 1x3sil, 2x1sil), 4 pcs cross-breams, 8 pcs, tool-fasteners, alignment aid for cardboard 1 x set for automa ...

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.

Gluing press Emmes Type: H EBP 500 . 10 Working length 5000 mm Working height 1530 mm Support width or depth 150 mm 10 Hydraulic Vertical Press Punch 5 pneumatic front hold-down devices max. compressive force 150/cm² Hydraulic pump 2.2 kW Oil pressure 159 kg/cm Air pressure 8 kg/cm²

Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes.

Width 94 cm Year of construction 1998 Longitudinal seam device Folding floor equipment Disc underglue unit left Gluing device HHS for cold glue 4 nozzle glue heads Small format equipment Valco Code Reader Ejector Pressing tape Price on request. We supply and install worldwide.

A 2-roller Höfer glue spreader is available. Working width: 800mm, rollers: 2. On-site inspection is possible.

Block size press Müro 4x5000A4 WT; cleaned and tested; 1xDryer; Stack increase. Block gluing machine Müro 4x5000/A4 WT; cleaned and checked; 1x dryer; pile elevation.

Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - / Contact us at -

Built in 1995 1 card glue 315 Robatech Nozzle Glue Plant Hotmelt Glue Plant Delivery date: immediately from stock Price on request. We supply and install worldwide.

A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible.

Features: belt feeder, Ero gluing system (cold glue, 4 nozzles), folding unit, pressing belt, max. sheet size: 60-800x126-1100mm, production possibilities: straight line, crash lock bottom, 4- and 6-corner, double-wall boxes and file covers/piches/envelopes, board thickness: 200-800g/m², corrugated board: N-, E-, F-flute, max. belt speed: 320m/min, shaking speed: 20m/min, main motor power: 11kW, total power requirement: 35kVA, max. air consumption: 0.7m³/min, length: 12,700mm, width: 2600mm, weight: 7t. Operational hours counter: 1494h. An on-site inspection is possible.

Müro 5000/A4 TM block size press; cleaned and tested; insertion width 350mm; Insertion height 520mm; Stack increase for small stacks. Padding press Müro 5000/A4 TM; cleanded and checked; width 350mm; hight 520mm; pile elevation.

Box format: Length: 100 mm - 400 mm Width: 50 mm - 320 mm Equipment: Standard, right-hand delivery, box material: 200-700 g/m², Box types: normal folding boxes, folding bottom boxes, 4-point erecting boxes, 6-point erecting boxes. Machine can be viewed by appointment while running.

Cylindrical adhesive applicator OSAM S2R-1300 + disc table OSMA TDM Working width 1300mm Maximum working height 100mm Manual adjustment of the working height 2 up-down glue rollers Disc table OSAMA TDM 1300-3000 Ce Year of manufacture of the set 2018 Total length of the set 560cm

Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.

TWO HHS HOT GLUE SYSTEMS to install on any folder gluer or any similar machine- from 1 to 4 glue points- years 2001/2006- Programmation- without guns- Price: 1.000 euro each LOT.

blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.

Two-ply gluing machine for making large-format boxes

Format range: max. 940 mm, min. 50 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 8 channel with 3 application heads, disc underglue unit left, Pre-crusher right and left, kicker, counter, vibrator on the feeder, digital Position indicators, threading station, lower center feed in folding, pneumatic, intermittent press belt, cleaned, tested.

Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.

Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data  Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to  ...

Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: motorized right turn / back dust margin, laser counter, speed infinitely adjustable via potentiometer. Packing scheme: 1–4 rows / layers, results in 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.

Reference ID: PP-56048 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 II Matic Year Built: 1996 Condition: Good Location: Europe Availability: Immediately Price: 85.000€ LOT Key Features & Equipment • Longitudinal seam configuration • Automatic bottom system (3-point) • 4/6-point gluing capability • Cold glue system by Valco (Year 2019) with 5 nozzles • Hot melt gluing system by hhs-Xmelt (Year 2017) with 3 nozzles • Integrated handle applicator • CoroPack 125 Bobst included (Year 1996) – electronics renewed

Reference ID: PP-56409 Category: Folder Gluer Manufacturer: Jagenberg Model: Diana 165-4 Year Built: 1999 Color: - Impression: - Working Hours: - Speed: - Max. Size: 1650 mm Min. Size: - Condition: Good Location: Europe Availability: Immediately Machine Description: Automatic feeder unit Extended folding and transfer section Press/delivery section Conveyor-type delivery Linear rail-based manual adjustment elements Top control panel / operator panel Safety equipment (protective guards, emergency stop, etc.) Gluing line (glue application infrastructure available)

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...

Working height 900mm Nominal width 1400mm Effective working width 1370mm Rolling pressure force max 5kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 350mm Panel thickness min 3mm Glue hot melt PUR Application rate 40-80g/m Driving power 6kW Tempering device 24kW

TECHNICAL DATA: Roller length: 1300 mm 02 rollers Ø 190 mm Installed power: 0.75 kW EQUIPPED WITH: Glue tray Roller protection grille Safety Foot Switches

cold gluer Ropi FK 3500 Year: 2010 Format / Working width: 60 x 170 mm / 450 x 450mm Technical specification machine suitable for small and very small products medium or small runs Paper/carton weight: 150 ? 450 g / m2 Type of adhesive/glue: commercially available dispersion glue Glue unit: pneumatic controlled gluing unit with 2 gluing heads Speed-dial controlled Feeder: suction belt feeder Speed: max. 10,000 products / h

Overview  The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details  Output: 16,000 - 20,000 bph Formats:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line

Overview The labeller was built in 2009 by Italian manufacturer PE Labellers. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 12.000 bph Adapted for: 1.0L and 1.5L Working sense: entry left – exit right (counter-clockwise) Number of labelling heads: 12 Label position: wrap-around  Label material: OPP with hot melt Machine drive: Siemens S7 Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L

Bobst Media 100 II A2 year 1999 HHS gluing system 6 guns cold glue 1 gun hot glue Disc Gluing

roller glue application machine, laminating machine, laminating system, laminating system -Manufacturer: VEB Jonsdorf -Type: LAM 1300 -Working width: 1300 mm -Number of rolls: 4 pieces -Roll diameter: Ø235 x 1310 mm / Ø170 x 1310 mm -Connection value: 2.2 kW -Dimensions: 2470/1000/H1390 mm -Weight: 1300 kg

Roller glue application machine, laminating machine, laminating system, laminating system, layering machine -Manufacturer: Hymmen, glue application machine, layer machine type 36 -Working width: 1300 mm -Roll diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm -Individual components: see photos -Dimensions: 2230/1100/H1410 mm -Weight: 1260 kg

- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-21

- 2 rollers with a diameter of 185 mm. - Feed speed 18 m/min. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-8

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine

Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators

Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle pla ...