glue binder used for sale

Muller Martini Perfect Binding Line, Equipped With: Endsheet Feeder, Perfect Binder: Muller Martini 3006-18 with Stream Cover Feeder with 18 Stations, Book Block Feeder, Hot-Melt Spine and Side Gluing with Pre-Melter, Spiral Lay Down Balance or Drying Converyor to Trimmer. Three Knife Trimmer: Muller Martini 3670 With Cassettes for Quick Change, Stacker Delivery, Max. Size: 450x310mm, Max. Speed 6.000 Cycles/Hour, Max. Size Head/Tail: 420mm, Max. Size Spine/Front: 305mm, Production: 4.000 Books/Hour.

2 x 10 Stations (20 Bins) Duplo Collator DC-10/60, M-No. 040600126/-129, Duplo Connecting Bridge, M-No. 040200317, Duplo Lifting Unit LUL-HM, M-No. 040600026, Duplo Stiching Unit With 2 Hohner Universal 43/6 Heads, Duplo DBM-500T Trimmer, M-No. 040600855, Total Cuts: 7929640, Brochure Repress Sation, M-No. 00152158, Duplo Stacker System 5000 For Porduct Delivery, M-No. 040601504, Format: Min. 120x148mm, Max. 350x500mm, Bin Capacity 60mm, Paper Stock 40-300 gram, Speed: 5000 Booklets/Hour or 10.000 Sets per Hour

1 pliers binder Hot melt binder Milling - Setup Envelope Press Station

1 pliers perfect binder Milling - Satation Hot glue binding Envelope Anpress Station

Horizon BQ-440, SL-40 Stack Lifter, HT-70 trimmer Horizon BQ-440: max. format 320x320 mm min. format 110x145 mm Speed 1,100 cycles/hour max./min. envelope size 145220 mm to 320580 mm Max. thickness 40 mm, min. 1 mm. 4 pliers

Perfect binder Single clamps Cover Insertion: manual Binding thickness 1 mm to 30 mm Serial No.: 084012 Located: Germany Available: immediately

Perfect binder Wohlenberg City 500 Art.Nr. PS5907 Year of construction 2000 from school - almost didn't run. Oрtу Compressor

Product No. 707826, Semi Automatic Stacking And Bundling Device, Working Width: 34cm, Min. Format: 14x8cm, Max. Format: 34x23cm, Max. Pile Length: 55cm, Pressure: 6 Bar

- Manufacturer: ExOne - Model: Innovent+™ - Description: The most advanced and flexible binder jet 3D printer in a compact package. The Innovent+™ is designed to reliably produce functional parts in a variety of materials, including metals, ceramics, and composites. It features patented dispensing, spreading, and compacting technology for consistent, high-quality prints from fine powders. Technical Specifications: - Build Dimensions: 160 x 65 x 65 mm (6.3 x 2.5 x 2.5 in) - Max Throughput: 166 cc/hr (10 in³/hr) - Layer Thickness: 30 to 200 μm - Print Resolution: 30 μm voxels - Min Powder Size: 2 μm (d50) - External Dimensions: 1,203 x 1,016 x 1,434 mm (47.4 x 40.0 x 56.5 in) - Weight: 500 kg (1,100 lbs) - Electrical Requirements: - 120V, 1-phase, 60Hz - 230V, 1-phase, 50Hz - Binder Systems: Aqueous, Solvent, Phenolic - Operator Interface: Full HD multi-touch display, On-board  ...

Description: Lot office/EDP equipment, consisting of FUJITSU Scansnap IX 500 document scanner, OLYMPIA A 3040 laminator, FELLOWES Helios 30 binding machine Approx. Onsite Dimension. (l x w x h): 600 x 500 x 300 mm, weight approx.: 10 kg

Mechanical convection cooling incubator (2pcs) For complex experiments on the incubation of microorganisms with their minimal dehydration without condensation in the inner chamber of the incubator. Has a programmable controller with a weekly programming timer. Temperature range from -5 to 100C, external dimensions 925 1945V 800, 1 external door and 1 internal glass door. The volume of the chamber is 400 l. Extendable grill 2 pcs. Weight (empty) 220 kg. Temperature variation max. +/- 0.6K, degree of protection IP according to EN 60529 IP 20. rated voltage at 240 V 1.4 kW.

spare parts - dimter application with 2 rollers Glue with 2 glue rolls 270 mm; guide from above; Aggregate not yet overdone, behaelter can be found;

We offer the labeler after comprehensive overhaul and modernization (including cabinet). The machine is designed for bonding three paper labels on glass bottle. Implementation of fully stainless steel. Labeller is equipped with two stations: - adhesive label front, neck and back label. Scanning system and label transfer is based on the pallets, which select a label from a magazine, transfer it onto the gripper drum and then onto bottle. The machine is extremely stable and reliable. Support comes down to refill glue and charge labels into magazine. Capacity: max. 24 000 b/h. We provide 1 set of equipment designed for a customer bottle. Machine has full 12-month warranty.

AUTOMATIC GLUE SPREADER type OMMA OPEN 1400 year 2003 CE mark : YES technical details : useful working width mm. 1400 max. working thickness mm. 80 working speed : 18 mt/min. spreading rollers diam.mm.250 dosing rollers diam.mm.185 installed power kw 1,6 weight kgs. 1200 volt. 380/50 standard details : - separate electric box - automatic cleaning device for spreading rollers - pressure-free side seals with antifriction flanges to avoid any overheating when long shifts and high working speeds are involved too - careful and sensitive adjustment of the dosing rollers by geardrives - large diameter spreading and dosing rollers - high uniformity of the spreading on full working width - separate gearmotor - collecting tank of the cleaning water - electric plant realized in accordance with high standards with low voltage on secondary circuits, all electric components in ...

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

Type ART. 200 Set with a single gun Pipe long 4 m Glue container 5 kg Universal nozzle Made in Italy Weight 10 kg

FORMAT 76x100 pocket wallet folder Estro unit for capacity folders (3D) very good condition, hotmelt gluesystem with 2 guns (MHGraphics is Fidia-dealer) price includes installation and instruction (3 days) in European Community transport Hotel etc. paid by customer price when new:Euro 185.000 Available: sofort/Imm.

Glue tank with rollers for sanding machine IMA

Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.

Glue application machine for sanding machine IMA

Technical data: - Pressure vessel 12 litre- operating pressure max. 5 bar- glue container with pressure gauge glue gun with pointed nozzle - glue hose 4 m- glue indication valve with pointed nozzle water tank for glue gun with holder

Technical data: - Foam rubber roller width 180 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

Technical data: - Foam rubber roller width 72 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

Format range: 1350 mm, min 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point bonding, electronic upper glue unit HHS Xpect YOC 2017, 8 channel with 4 application heads, disc glue on the left, new electronic servo overtaking system with touchscreen, Feeder with clock control and vibrator, feeder belt with Quick adjustment, pre-breaker right and left, kicker, counter, digital position indicators, additional means transport in the Pre-crusher top/bottom, folding floor module 150 with additional Medium transport top/bottom, additional means transport in folding, Jagenberg DBS01 control, motorized threading station, Video surveillance in the transfer station, fully automatic Format setting Jagset 2, cutting alignment on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transpor ...

Technical data: - pressure vessel 8 litre- operating pressure max. 5 bar- glue container with pressure gauge glue gun with pointed nozzle - glue hose 4 m- glue indication valve with pointed nozzle- water tank for glue gun with holder

1 used Nordson order head, type Mini Blue II SureBead, 230V / 100W, with solenoid valve and 40-degree connection, built in 2013. 10 pcs. available (intermediate sale reserved).

1 used Nordson 16 foot hose, Blue Series, 240V/504W. Built 2013. Nordson part number 2747976. 6 pieces available (intermediate sale reserved).

1 used Nordson 24 foot hose, Blue Series, 240V/760W. Built 2013. Nordson part number 274797. 6 pieces available (intermediate sale reserved).

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.

Built in 2001 ; working condition

Block glue press Müro 5000/A3 TM; good condition; cleaned and tested; Table equipment; Format A3; Stack increase. Padding press Müro 5000/A3 TM; good condition; cleaned and checked; table top machine; size A3; Pile elevation.

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

finger jointing spare parts - GRECON Glue application system Glue system compl. Drive plate with Glue and dosing roller L=270 mm (300 possible) 2 Stueck

Format range: max. 1350 mm, min. 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 + 6 point gluing, HHS electronic finishing unit, 4 channel with 4 application heads, High pressure, disc gluing unit left, electronic Overhaul folding with servos, extended folding station, module 150, Primary crusher right and left, kicker, counter, vibrator on the jetty, digital position indicator, motorized threading station, motorized Transfer station, additional means transport in folding, vacuum on Overturning, camera surveillance, Jagenberg DBS 01 control, fully automatic format setting Jagset II, pneumatic, clocked Press strip. Overhaul 2023: cleaned, checked, painted and with new feeder and transport belt. Other: The machine can be viewed while running by appointment.

spare parts - cook bolinders - glue application with gluing combs Ccmealplm For adhesive application on compact wedge zinc systems (compact wedge zinc machine ) Praezisions glue comb system with working width max. 250 mm, 2 tine laenia 15 mm or alternatively 20 mm

Format range: max. 1000 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-tend, 4 channel with 2 application heads, Disc gluing unit left, feeder with vibrator, folding floor module A2 Primary crusher right and left, kicker, counter, Bobst CUBE control, additional middle transport at the top/bottom in folding, cutting alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, tested, painted and fitted with new feeders and Transport belts, as well as equipped with new press belts. Other: The machine can be viewed while running by appointment.

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Format range: max. 1850 mm min. 420 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic HHS top gluing unit with 4 application heads, disc bottom gluing unit on the left, Primary crusher left, motorized format adjustment, Kicker, counter, friction feeder with clocking, vacuum at the feeder, digital position indicator, motorized transfer station, middle station in folding, cutting alignment according to the feeder, Cutting alignment on the press belt. Overhaul 2023 with new feeder and transport belts, new Press belts top / bottom, cleaned, checked, painted Other: The machine can be viewed while running by appointment.

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

We have the following Nordson Hotmelt units for sale: 2 x 3500 2 x 3800 1 x Pro Blue 4 1 x Pro Blue 7

Barberan Lamination line include following machines: 1- GLUE UNIT ( MELER BRAND 250 LT) 2-FRONT LIFTER 3-FORK FOR FRONT LIFTER 4-GLUING MACHINE BARBERAN EN-PUR-4-1600 5-CONVEYOR BARBERAN IT-4000/16 6- LOADING FOR FOR CONVEYOR 7-PRESS BARBERAN CAL-H-2-1600 8- GUIDE ROLLER 9- BACK LIFTER

Amtmann Fassong banding machine / laminating machine. Year of construction: 1986 Step 1: Foil blanks are separated from the stack by the vacuum plate and partially glued via the gluing unit Work step 2: The A4 cardboard blanks from the additional cover sheet feeder with conveyor belt are separated and transported to the transfer position. Step 3: The partially glued film blank is transferred to the positioned A4 cardboard blank for transfer to the final position. Step 4: Transport by means of a pressure unit. Suitable for solid, shape, edge or strip gluing, depending on the design of the glue transfer roller in time, from different carriers, such as punched blanks, etc. The Fasson banding machine is designed to speed up the production cycle.

Glue application machine NEW MACHINE MH 6213 4 reels Working width: 1300 mm Double Burste

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Format Range: max. 1650 mm min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS X-tend 8 channel with 4 nozzles, Disc gluing unit link with re-pumping device, electronic Overtaking fold with servos, feeder with vacuum, primary crusher left, Kickers, counters, digital position indicators, pressing device after folding, motorized threading station, Jagenberg DBS 01 control, Fully automatic format setting Jagset II, corrugated cardboard package , 3 x alignment with the press belt, pneumatic, clocked press belt. Press belt extension, video surveillance tray, cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running, by arrangement.

POLYPRESS is suitable for the flexible production of straight and curved components made of glulam. Their special design allows adaptation to a wide variety of assignments and steppings in the shortest possible time. Batch size 1 can be produced rationally with this press.

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.