We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,272 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, disc glue on the left, Vibrator & dental apprenticeship on the feeder, pre-crusher right and left, Kicker, counter, fully automatic format setting with Program memory, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped. Other: Machine can be visited by arrangement while running.
used
Mueller Martini 315 Year of construction 1995 1 card glue 315 Robatech nozzle glue unit Hotmelt Duesenleimwerk Delivery date: immediately from stock Price on request. We deliver and install worldwide!
used
I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.
used
Plate Cart
used
Glue application machine HYMMEN Type: TLA 1400 Working width: 1300 mm Dzha9h 4 reels
used
Format range: 550 mm min. 58 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS Xtend, 8 channel with 3 application heads with code reading device, Disc glue control, nozzle glue control, linear ejector, Disc glue on the left, feeder with vibrator & blow nozzles, Feeder with own drive, cutting orientation on the left, Pre-crusher right and left, kicker, counter, folding floor module, Transfer station with own drive, Siemens control panel, Radio remote control, extended, pneumatic press belt, cleaned, tested.
used
Polygraph kama folding glue machine with 3 points format 104
used
Format range: 480 mm min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, electronic gluing unit HHS, 4 channel with 2 application heads, pane under-gluing unit left, Bobst CUBE control, vibrator, primary crusher right and left, Kicker, counter, minimal folding device, pneumatic, clocked Pressing tape. Overhaul 2023: cleaned, tested, new investor and Transport belts.
used
THREE HHS HOT GLUE SYSTEMS to install on any folder gluer - from 1 to 4 glue points- years 2005/2010- Programmation- without guns- Price: 1.000 euro each LOT. NORDSON HOT GLUE SYSTEM MODEL 2035 with one spray gun included – 4 exits- PRICE: 1.000 euro LOT.
used
Format range: 700 x 800 mm min. 100 x 80 mm Equipment: Cliché glue, counter, split cutting guide, new discharge conveyor, double-stroke folding machine, cleaned, tested, painted, new cutting transport chains. Other: Machine can be visited by arrangement while running.
used
Block glue press Müro A3/2000 WT; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insert height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.
used
Reference ID PP-31002 Category Folder Gluer Manufacturer - Model 1850 Year Built 1991 Color- Impression- Working Hours - Speed-- Size 1300mm x 1850mm Min. Size 150mm x 420mm Condition Good Location Europe Availability Immediately Machine Description Aspirated introduction, Linear introduction, automatic bottom and 4/6 corners with mechanical flippers Left-hand disk gluer Nordson gluer Front and rear aligners at the "Trombone" section Front aligner at the exit conveyor Pressure conveyor Accessories, spare parts available at the dismantling date, electrical diagrams,
used
Name Bobst Omega 1600 ID PP-31247 Category Folder Gluer Manufacturer Bobst Model Omega 1600 Year 1982 Size 1600 mm Min. Size 314 mm Condition Good Location Europe Availability April 2023 Description • Glue type HHS cold glue with 3 nozzles • Cardboard thicknesses: EB, BC, C, B, EE, E • Longitudinal seam • Types of boxes that can be made 4 corners, 6 corners, junction, self-supporting bottom, reinforced self-supporting bottom
used
up to 20.000 boxes/hour, SK-5-F precision-stencil- gluing-unit and takt- feeder, solid or corruga- ted board 150-600 gramms.
- Glue specification for package height up to 300mm by means of 1 application roller - The drive via 0.37 kW worm gear motor Bilglu - 1 ST left - 1 ST right - suitable for DIMTER HK 200 and HK 400 Spare parts Dimter Accessories dimter
used
Press also ideal for gluing 4200 x 450 x 60 mm Practical and space-saving 15 pieces press cylinder ( diaphragm cylinder ) with press stroke per cylinder 70 mm, pressing force per cylinder 6800 N 16 pieces of hold-down Loading dimensions L 4.5 x W 1.1 x H 0.5 m Net weight 600 kg OPTIONS the last 3 images Price on request 2 press frames for turning 3 press frames as gluing stars 4 press frames
used
Format range: 915 mm min. 45 mm Equipment: Longitudinal seam, folding floor, double edge, new electronic Upper gluing unit HHS Xact, 4 channel with 2 application heads, high pressure, Windscreen under-glue unit left, feeder with vibrator Vorbrecher right and left, kicker, counter, digital position indicators, motorized transfer station, pneumatic, intermittent pressing belt. Overhaul 2023: cleaned, tested, painted, new pier and transport belts. Other: Machine can be visited by arrangement while running.
used
Format range: box length: 80-535 mm, Box width: 50-400 mm, Equipment: standard, motorized curve / dust wall, counter, Packing scheme: 1-4 rows / layered, gives 16 possibilities Overhaul 2023: cleaned, tested, painted, new belts. Other: Machine can be visited by arrangement while running.
used
Good Used Glulam Beams Press BUILD YEAR 2010 Hydraulic Preeslaenge 12 m Press height 1.3 m Machine like new
used
Glue application machine BÜRKLE BDL 1300 Factory overhauled in 1988 Motor power: 0.37 kW (380V) Working width: 1.30cm max. rubberized roller width: 133 cm The rubber rollers are in good condition Height adjustment by handwheel. max. workpiece height / passage height: approx. 75 mm Machine dimensions (LxWxH): 195 cm x 62 cm x 142 cm Operating instructions available.
used
Format range: max. 740 mm (can be extended to 1040 mm) min. 50 mm Equipment: Longitudinal seam, disc gluing unit on the left, vibrator, cutting alignment according to the feeder, Primary crusher right and left, kicker, counter, digital position indicators, motorized, extended transfer station, Press belt with pneumatic pressure adjustment, main drive with Frequency. Overhaul 2023: cleaned, checked, painted and with new feeder and transport belts, as well as new press belts. Other: The machine can be viewed while running by appointment.
used
Format range: max. 2250 mm min. 420 mm Equipment: longitudinal seam, folding shelf, double edge, 4 point, electronic Upper gluing unit Valco MCP 25, 8 channel with 6 application heads, electronic overhaul folding with servos, vacuum suction feeder, vibrator, pre-crusher, kicker, counter, motorized format setting, press rolls after folding, cutting alignment in the transfer station, Cutting alignment on the press belt. Solid board max. 1500 gr/m², corrugation: A, B, C, BA, BC flute Overhaul 2023: cleaned, checked, painted, new jetty and Transport belts.
used
Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...
used
Equipment: HHS re-pumping gluing unit for disc slime sub-gluing unit fully automatic with capacitive contactless sensor, High-pressure pump, metal frame.
used
SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm
used
Sale directly from the owner! No middlemen! The machine for sale consists of 1 Casemaker 900/2400 Model Servo Drive System (Simca/DY), consisting of: - 1 Investor - 3 flexographic printing units - 1 groove slotting mechanism - 1 folding machine - 1 Valco glue device - 1 counter-ejector - 1 central control - 1 cable tray - 1 set of running rails and 1 prefeeder model 12x25 (Fossaluzza), consisting of - 1 basic machine - 1 autom. Stamp centering So far, the machine has only been test-run, and then dismantled again.
new
Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS
new
Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device
new
RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis
used
Overview The KHS Innoket Roland 16/4 H labeling machine was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in very good condition. Both wet glue and self-adhesive labels can be processed on the machine. The bottle plates are driven by servo motors. Tech Specs: Output: max. 18,000 bph Labels: self-adhesive labels and wet glue labels Bottle formats: 0.5l NRW Special: Other formats are available, as jam jars and spirits bottles were also labeled in the past. Formats can be set as desired, since the bottle plates are aligned via servos and not via a control cam Additional Equipment: Spare parts like servo motor, infeed screw with gearbox
used
Overview The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition. Technical data Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left Complete documentation With a new bottle format and 2 new label formats Freely selectable label dimensions
used
Overview The labeler was manufactured in 2007 by the Italian company SACMI. It is located at a Spanish machine manufacturer. The machine is in good condition. Technical data Capacity: 7.000 containers/h (with 5l-container) Formats: 5l, 8l, 10l Direction of rotation: clockwise Number of bottle holders: 6 Hot glue and pre-cut paper labels One labeling station
used
Overview The OPP labeller Krones Contiroll HS was manufactured by Krones in 2014. It was used in a dairy plant in the Philippines. It was used for cans, filled with milk. The cans had the dimension 209mm x 208mm. As the machine became redundant, it is for sale now. The machine is already disassembled, but can be inspected. Full technical information is available. Tech Specs: Capacity: 36,000 uph Control: Siemens S7 Number of aggregates: one Container dimension: 209mm x 208mm Dimensions: Height: 2450mm Length: 2800mm Width: 3230mm
used
Overview The labeler was built in 1990 by the German manufacturer Krones. It is in a good condition. Technical data: Capacity: 3.000 bph Glue: cold glue Working hours 7,932.45 Formats Bordeaux bottle 0,75l: label, back label, tie band 1,00l: label Number of bottle plates: 6 Pitch circle diameter: approx. 235 mm Techn. documentation available Glue roller is made of rubber-coated steel
used
Overview This labeller was manufactured in 1999 by Auxiemba and is used by a winery from Spain. The company decided to replace this labeller by an auto adhesive unit. The machine is under working conditions and can be visited. Tech Specs Output: max. 14,000 bph Labels: self-adhesive labels and wet glue labels Bottle formats: 375 ml 750 ml 1500 ml
used
Overview The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative. Technical data Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable
used
Machine Description linear gluing, automatic bottom, 4 corners the main engine and the carpet engine are almost new It is equipped with a ZATOR cold glue system WITH 3 spray guns
used
Hot glue gun SCA SCHUCKER AK 310-10/H/230V 7845.1000 D Heizung AK 400-450 230 V 0642.1003 New ! Dimensions: 230 x 100 x 130 mm
used
Glue pump with heating More then 300 machines new and second hand on our seema .de
used
Glue pump with heating More then 300 machines new and second hand on our seema .de
used
Format range: max. 450 mm min. 55 mm Equipment: Longitudinal seam, folding bottom, double edge, new electronic top gluing unit HHS, 4 channel with 2 application heads, disc gluing unit left, Primary crusher right and left, kicker, counter, vibrator on the jetty, digital position indicators, small box setup, intermittent press belt. Overhaul 2023: cleaned, checked, painted and equipped with new feeder and transport straps. Other: The machine can be viewed while running by appointment.
used
Format range: max. 1040 mm min. 50 mm Equipment: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic finishing unit KAS TOP Guard, 8 channel with 3 application heads, Disc gluing unit on the left, feeder with vibrator, mini box device, Primary crusher right and left, kicker, counter, digital position indicators, motorized medium transport in folding, pneumatic, intermittent Press strip. Other: Machine can be inspected in production by arrangement. (very neat condition)
used
Inv. Num. : 6970 Type: Bondjet BJ959 Producer: Hesse Mechatronics Created: 2017 Parameters: Axis X: 370 mm Axis Y: 560 mm Axis Z: 42 mm The rotation angle: 220 Equipment: Manual
used
Overview The labeler was manufactured in 2000 by the German manufacturer Krones. It can label up to 22,000 bph and has processed 0.5l so far. The machine can be purchased refurbished and with warranty on request. Technical data Rotary labeling machine for the application of a wrap-around label Capacity: max. 22.000 bph Processed formats: 0,5l Number of plates: 15 Hot glue Label: OPP Roll fed
used
Manufacturer: Hymmen , Type: TLA, Year: ca.1990, 4 roller machine: yes, Work piece width min-max mm: 30-1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3-120, Diameter of roller coater mm: ca.230, Year :ca.1990
used
Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018
used
Manufacturer: Bürkle, Type: DAK, Working widht max mm: 1420, Diameter of roller coater mm: 238,
used
Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997
used
Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015
used
Glue press Müro 4x5000A4 WT; cleaned and tested; 2x dryer; heat conduction plate; Stack increase. Block gluing machine Müro 4x5000/A4 WT; cleaned and checked; 2x dryer; pile elevation; heating sheet.