glass cutting table used for sale

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

plate thickness:15 mm total power requirement:13 A 9 KVA weight of the machine ca.:50 kg dimensions of the machine ca.:1000 x 400 x 650 mm

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Tube cutting machine manufactured in 2011. This TRUMPF TruLaser Tube 7000 features a laser power of 3600W and an impressive X-axis travel of 6500 mm. It is equipped with a circular diameter of 200 mm, ensuring efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 7000 machine we have for sale. Contact us for further details.

This 3-axis Bodor P3-G3 fiber laser cutting machine was manufactured in 2024. It features a powerful 12,000W laser, providing efficient cutting capabilities for various materials. If you are looking to get high-quality cutting capabilities, consider the Bodor P3-G3 machine we have for sale. Contact us for further details.

Cutting Machine Fischer Hartmannsdorf OK S TZ 2 Year: 1981 0.37 kW 220 / 380 V Dimensions: 350 x 180 x 480 mm Weight: 11.5 kg

Cutting Wheel Set RIDGID E-1032 Diameter: 38.6 mm Cutting Depth: 11 mm Cutting Wheel Set consists of 6 cutting wheels ! New ! Dimensions(Packaging): 80 x 60 x 45 mm

Cutting dies, tapping dies, hexagonal JBO R1.1/2 HSS Wrench size: 85 mm New ! Dimensions: 98 x 85 x 22 mm

Cutting dies, tapping dies, hexagonal JBO R1.1/4 HSS Wrench size: 70 mm New ! Dimensions: 81 x 70 x 20 mm

Cutting dies, tapping dies, hexagonal JBO R1 HSS wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting dies, tapping dies, hexagonal JBO BSP G3/4 HSS Wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting dies, tapping dies, hexagon EMUGE G3/4 HSS ISO 228 Wrench size: 50 mm New ! Dimensions: 56 x 50 x 16 mm

Cutting dies, tapping dies, hexagon EMUGE G1A HSS ISO 228 wrench size: 60 mm New ! Dimensions: 68 x 60 x 18 mm

Cutting dies, tapping dies, hexagon JBO BSP G1 HSS Wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting Dies, Tapping Dies RAXA 6M R2 HSS Diameter: Ø 105 mm New ! Dimensions: 105 x 105 x 22 mm

Cutting dies, tapping dies PAGUS R1.1/2 HSS diameter: Ø 90 mm used ! Dimensions: 90 x 90 x 22 mm

Cutting Dies, Tapping Dies RAXA 6M R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

Cutting dies, tapping dies PAGUS R1 6110-1n HSS diameter: Ø 65 mm New ! ! Dimensions: 65 x 65 x 18 mm

Cutting dies, tapping dies EMUGE R1 HSS diameter: Ø 65 mm New ! Dimensions: 65 x 65 x 22 mm

CNC Flame Cutting Machine BACH APOLDA AC 2500 Year: 1993 Control: MESSER GRIESHEIM KS20A Dimension : 3800 x 2000 mm 2 burners oxygen, propane without table ! Rails 8 meters (2 x 8 meters) used, tested ! Documents available. Dimensions : 3800 x 2000 x 2000 mm

Cutting dies, tapping dies FW R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

CNC Flame Cutting Machine, Plasma Cutting Machine BACH APOLDA ACW 2500 Year: 2001 Control: NBS 400 Dimensions of System: 4100 x 1900 x 1500 mm without table: rail 8 meter (2 x 8 meter) 2 oxy-fuel cutting heads 1 plasma cutting head MANNSFELD PGS 50 74 kVA Bj.: 1988 without table ! used, tested ! Dimension plasma equal: 1600 x 660 x 1500 mm

Cutting head ROLLER ́S CENTRAL M32 x 1.5 holder: Ø 64 mm Dimensions: 80 x 84 x 84 mm

Cutting head ROLLER ́S CENTRAL M40 x 1.5 holder: Ø 64 mm Dimensions: 80 x 92 x 92 mm

Cutting head ROLLER ́S Central R1/2 holder: Ø 64 mm Dimensions: 80 x 70 x 70 mm

Cutting head ROLLER ́S Central R1.1/4 holder: Ø 64 mm Dimensions: 80 x 95 x 95 mm

Cutting head ROLLER ́S ROLA-H Pg 16 holder: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Cutting head ROLLER ́S ROLA-H Pg 21 holder: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Cutting head ROLLER ́S ROLA-H Pg 29 holder: Ø 64 mm Dimensions: 125 x 100 x 100 mm

Cutting head ROLLER ́S CENTRAL M25 x 1,5 holder: Ø 64 mm Dimensions: 80 x 80 x 80 mm

Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm  

Bread slicer Band slicer PS Mako Slicer 400 - Ribbon bread slicer - Manufacturer: PS Mako - Type: Slicer 400 - Operating voltage: 400 volts - Rated current: 8A - Year of construction: 2002

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Bread slicer Treif Diskus 400+ circular knife -digital control - Cutting width adjustable from 3 mm to 15 mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Nominal power 0.9 kW - Year of construction 2015 External dimensions: width 80 cm depth 70 cm height 112 cm

Find more here - .ucymachines/

a Plasma Cutter for sale, 70A source, 2500 x 1250 CNC bed 2021 Mantech Phantom P26 The machine is a Mantech Phantom P26, please note that it is running a 70CT GYS powersource rather than Hypertherm. The machine was new in July 2021 and has had only light use, it is essentially in as new” condition. It has touch screen control / windows PC. Power requirement is TWO 32A Class D sockets, plus gas (we run on dry refrigerated air) Find more here - .ucymachines/

The machine (built 1999) comes with a table of 3 x 4m, can work with up to four cutting heads and is fully functional. The scope of supply includes an automatic sludge extraction system, sand storage tank incl. pressure vessel and an Ingersoll high-pressure pump. 2x head system. Can also run with 4x heads 1x pump included. has always been serviced. Is ready to use. Great working condition. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2011 Satronik DHDS-5500 Plasma cutting device: Table size 4700X13000mm Useful cutting area: 4000X12000mm Program language: G kodos Topaz Cutting range: Lv2-Lv30mm Angle cut: up to Lv25mm High speed:19000mm/perc/MIN Find more here - .ucymachines/ Contact us at - sales@ucymachines

2000 Sato Elektronik SATRONIK Flame cutting machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

2017 Trumpf TruDisk2002 (FD24) A laser device with chiller in excellent technical condition Manufacturer: Trumpf Type: TruDisk 2002 (FD24) 380 V -10%... 460 V +10%, 3AC +PE 11,8 kW/12,6 kVA 18 A/400 V IP 54 50... 60 Hz July 2017 4/2LLK: 550/470 kg Icn/SCCR 13 KA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Trumpf Model: TruDisk 8002 (6000) Type: TruLaser-Robot 5020 Date of Manufacture: December 2007 Weight: 2000 kg Technical Specifications Electrical Details: - Voltage: 380 V (-10%) to 460 V (+10%) - Phase: 3 Phase + PE - Frequency: 50 - 60 Hz - Current: 56 A (at 400 V) Power Consumption: - Power: 39 kW / 40 kVA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Offer 24820 Specifications: - Infinitely adjustable cutting current 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - max. cutting thickness - steel approx. 32 mm - Alu approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing plant - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round blade, electrically oscillating knife and a milling machine (incl. suction device) • Multifunction tool head for holding up to 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universa ...

Rego Herlitzius Type: Rotec 350 Circular knife Year of construction 2010 Cutting width: 3 – 25mm completely made of stainless steel for loaves max 3250mm length on casters tested and cleaned Stock level: 2 pieces