gi used for sale

Manufacturer: Giardina Lackwalze 1450 mm Poore Neu<CRLF>NeuGiardina, Spare roller: Öl Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: schleifen,

Entrance width 2000 mm Lenght 12.000 mm Number of turbines 6 Turbine output 7.5 kw

Manufacturer: Giardina Lackwalze 1450 mm ca 35 shore muss geschliffen werden, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm distance spindle /table: 60-765 mm distance spindle/base plate: 1.200 mm taper MK: 3 threading: M20/M24 column diameter: 115 mm table-size: 510 X 425 mm spindle turning speed - stepless: 60 - 1:400 U/min total power requirement: 1,4 kW weight of the machine ca.: 350 Kg. dimensions of the machine ca.: 1,9 x 0,6 x 0,9 m - Digital spindle speed display - Foot switch - Thread cutting device - Left-right rotation - 2-speed motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: MINIPAN Model: CMBY 0400X000.06 GIROPN Year of Manufacture: 2011 Type of Machine: Soft dough biscuit forming machine • Power supply: 400V • Power consumption: 3.2 kW • Backlit LCD display with touchscreen • Rollers for soft dough • Fixed molds with wire cutter • Rotating molds: "guillotine" that opens when the dough is placed and then closes for precise dosing without dripping • Sheet size: width 400 mm, Length: min. 600 mm, max. 800 mm • Sheet types: 2 internally inclined edges, magazine for up to 20 sheets • Dimensions: Length = 2600 mm Width = 990 mm Height = 1400 mm Weight = 530 kg • Sugar dispenser at the machine outlet • DÜBOR TSA 800/10 plate lubricator (, 2012) with 5 spray nozzles Find more here - / Contact us at -

We are looking for retail properties for sale without a broker! Criteria: vacant retail properties in need of renovation, such as DIY stores, supermarkets, hotels, apartment blocks in Germany and the Netherlands in cities with 20,000 inhabitants or more or near major cities. Please send all offers to the contact person: Svetlana Ament E-Mail: samentscholten-tanks Phone: 05924 255 485

We are looking for hotels for sale without a broker! Criteria: vacant hotels in need of renovation in Munich, Berlin, Hamburg and Frankfurt am Main or near major cities wanted Please send all offers to the contact person: Svetlana Ament E-mail: samentscholten-tanks.de Phone: 05924 255 485

Offer 25094 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 60 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 225 mm - Drilling spindle speeds infinitely adjustable 35 – 950 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max. distance from drill spindle to table / base plate 740 / 1220 mm - Table with 2 T-slots 700 x 590 mm Height adjustable via rack with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space requirement approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - with: - Emergency stop button -Lighting - Coolant device

bar capacity 90 mm - 2x12 driven positions turrets - Y axis in upper turret - tail stock - very very well equipped ( 36 driven + 39 fixed tool holders - 30 collets etc.etc.) - Lns Sprint S2 barfeed with front magazine - Siemens 840D Power Line Control - IN PERFECT CONDITION

Description TWIN SCREW GRANULATION LINE Twin screw co-rotating extruder diameter 140 L/D 32 Feeder silo, forced feeder with dosing units, control panel Celetric Water ring peletizer Forties T1000 year 2016 Hydraulic screen changer Rectangular vibrating screen

Description TWIN SCREW GRANULATION LINE Twin screw co-rotating extruder diameter 140 L/D 32 Feeder silo, forced feeder with control panel Celetric 2012 Dosing system for side feeder Ergomec 2012 Water ring peletizer Filtech GRO 1000 Hydraulic screen changer Rectangular vibrating screen

number of spindles: 8 bar capacity: 36 mm control: FANUC 30i-B Subspindle speed: 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.

number of spindles: 8 bar capacity: 36 mm control: FANUC 30i-B Subspindle speed: 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motorised roller table 19.3000mm year 2007 consisting of: 2 x roller tables 1300x6000mm 1x roller table 1300x4000mm 1 x roller table with longitudinal roller guide 1300x 3300mm Working width 1,300 mm Frame: painted steel frame Castors: 30 mm plastic disc castors, white Roller spacing: approx. 50 mm Stopper: spring-loaded disc stopper Legs: adjustable H-legs, height descending 900>800 mm adjustment +100 mm CE documentation ADDITIONAL: Frequency inverter for speed control

number of spindles: 8 bar capacity: 36 mm control: FANUC 30i-B Subspindle speed: 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lg.Nr. 25075 Mot. Welding rotary and tilting table Specifications: - Load capacity 1000 kg - Face plate diameter 800 mm - Face plate can be tilted by motor - Rotary movement electr. infinitely variable 0 - 250 cm/min - Welding current transmission 650 A - Drive 400 V / 2.8 kW - Table height in horizontal position approx. 1100 mm - Re- + counterclockwise rotation - Space requirement approx. W 1200 x H 1100 x D 1500 mm - Weight approx. 850 kg

Manufacturer: GILDMEISTER Model: MSL 42 Operating Hours: 3,000 Find more here - / Contact us at -

turning diameter: max. 560 mm turning length: 600 mm control: 840D powerline Siemens greates pass round over bed: 680 mm Swing dia. over traverse guideway: 565 mm centre distance: 620 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 37 kW max. Torque: 390 Nm spindle nose: 170H5 spindle bearing diameter: 120 mm usable bar diameter: 65 mm max. chucking diameter: 250 mm C-Axis: 0,025° / 360 ° Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1 power capacity - Sub spindle: 25 / 33 kW max. Torque: 213 Nm spindle bearing diameter: 90 mm spindle bore: 57 mm spindle nose: 140H5 C-Axis: 0,025° / 360 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tools: max. 4.500 min -1 power capacity - driven tools: 12,2 kW tool taper: VDI 40 DIN 69880 Tool dimensions with sq ...

A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible.

E-chain hoist, electric hoist, crane GIS type 150 / FFabr. No: 1502802 Year of construction 1981Load capacity 1500 kgHook travel 4 metersMain lifting speed 4 m/min. Fine lifting speed 1 m/min.- Electric carriage with a speed for double T-beams- 2 load trainsGood condition; used

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h.

tail stock: ja : ja condition: nicht geprüft weight of the machine ca.: 3,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible.

: 2 turning diameter: max. 250 mm toll turrets: 2 x 12 control: Fanuc 16 T tool taper: HSK 63 : 04800000181 frequency: 50 Hz ampere: 168 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible.

turning diameter: 42 mm turning length: 250 mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-lathe with bar feed with Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible.

core drilling diameter max.: 18 mm bore depth: 320 mm swing diameter: mm total power requirement: 33 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- neu aufgebaut, neue Elektrik in 2018, - Schnecken-Späneförderer, - Ölnebelabsaugeinrichtung, - Kühlmittelfilter, selbstreinigend, - Doppelschlitten in Lage 6 zum Abstechen und Rückseitenbearbeitung, - Polygondreh- und Gewindefräseinrichtung Lage 4, - CNC-Kreuzschlitten AUTOR in Lage 5, - Abgreifspindel, hydraulisch in Lage 6, - Transportband für Fertigteile, - Stangenlader Iemca PRA

Gildemeister G20, 6-Spindel-Portal-Drehautomat, GILDEMEISTER 20, Maschine komplett überholt, Elektrik - neu, PLC – neu, Mechanik - generalüberholt -, Geometrieprotokoll – wie Neumaschine –, CE – Konformitätserklärung, einschl. elektrische Standardausrüstung, Grundausstattung der Maschine:, 1 Tippbetrieb zum Einrichten, 1 automatische Zentralschmiereinrichtung, 1 Kühlmitteleinrichtung einschl. Pumpe und Antrieb, Behältervolumen ca. 650 L, 1 Werkzeugspindelführungsblock, 1 Antriebsgruppe für rotierende Werkzeugspindeln einschl. Gewindeschneidgetriebe für jede Werkzeugspindelposition wahlweise:, - a) Gegenläufig zum Schnellbohren, - b) Synchronlaufend, - c) Zum Gewindeschneiden bzw. Reiben, 2 Planschlitten mit unabhängigen Planvorschub, 4 Kreuzschlitten mit unabhängigem Plan- und, (Längsvorschub als Option) + 1 Maschinen-, leuchte, 1 Paar Wechselräder für Spindeldreh ...

3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Fanuc 310i, Country of origin: Italy, Operating hours: 34.000 | 22.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000

Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi

Control: Fanuc 310 i, Max bar diameter [mm]: 25, Number of linear axis + C axis: 6 + 2, Spindle speed [rpm]: 10.000, Spindle motor [kW]: 3,7, Z - travel [mm]: 80 | 300, X - travel mm: 50 | 240, Y - travel [mm]: 350 | 120, High pressure coolant: 20 bar, Auto bar loader: FMB Turbo 3-26/3200, Machine weight approx. [kg]: 3.800

Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625

6 spindle bar automatic Gildemeister GS20, compound slide with drive in pos. 1, compound slide with drive in pos. 2, compound slide in pos. 4, compound slide in pos. 5, 4x axial spindle (pos. 1, 2, 4, 5), rotating milling device in pos. 3, pick-up spindle pos. 6, swing rear machining arm drive in pos. 3, swing rear machining arm drive in pos. 6, swarf coneveyor, worm type, set of tool holders, set of cams, Number of spindles: 6, Max bar diameter [mm]: 20, Max bar feed [mm]: 100, Spindle speed [rpm]: 214 - 5.168, Spindle motor [kW]: 11, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Pietro Cucchi

Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600

Gildemeister GM20, Country of origin: Italy, Operating hours: 0, Number of spindles: 6, Max bar diameter [mm]: 20, Auto bar loader: Cucchi Giovanni alternative IMG Easy load

A double-sided Busetti glass drilling machine is available. Drilling heads: 2, drilling dimensions X/Y: 1250mm/1450mm, min. drilling diameter: 3mm, max. drilling diameter both drills/with top drill: 130mm/220mm, speed: 4000rpm, max. glass thickness: 38mm. Machine dimensions X/Y/Z: approx. 4500mm/2050mm/2300mm, weight: approx. 1700kg. An on-site inspection is possible.

turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 212 mm turning length: 750 mm control: HEIDENHAIN Manual Plus spindle turning speed - stepless: 10-4000 U/min turret head: 8 Stationen weight of the machine ca.: 2 t dimensions of the machine ca.: 2.85 x 1.65 x 1.80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 210 mm, 305 mm, 5000 1/min

CNC Lathe Make: Gildemeister Model: CTX 200 Control: Heidenhain Pilot 1190 Year of manufacture 1996 Switch-on hours: approx. 38,000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over carriage 210 mm Turning length 305 mm Bar passage 42 mm Speed 5000 rpm Turret 12 stations Tool holder 20 VDI Machine dimensions L x W x H 2800 x 1651 x 1771 mm Machine weight approx. 3000 kg Accessories: Various tool holders Collet chuck on main spindle Tailstock Documentation

ICMA S.GIORGIO TWIN SCREW EXTRUDER, for PE PP PS PC ABS, Barrel with 2 x 110 mm co-rotating screws, n.1 vacuum degassing pump, semi-automatic hydraulic screenchanger (possible fully automatic screenchanger), no cuttins, but we can supply STRAND or WATER RING or UNDERWATER, Electric cabinet

EWD - GILLET log bandsaw line with canter and double-cut, - Heavy duty log loading deck, - EWD hydraulic log carriage, type EW 1000, - GILLET canter, type SL, - GILLET bandsaw machine, type TO1600, - Outfeed conveyor, - Control unit with Mudata controller

chucking diameter: 250 mm greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 850 / 1350 mm weight of the machine ca.: 2700 KG dimensions of the machine ca.: 2900 x 1953 x 1825 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Heidenhain centre distance: 1400 mm weight of the machine ca.: 3,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C