gh used for sale

Key data: 3080 mm, 6 mm

max. sheet thickness steel (450N/mm²) 6.5 mm max. cutting width 3080 mm Machine weight 5600 kg Very good, ready-to-use condition

pressure: 185 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 175 mm/s bending speed: 0-12 mm/s total power requirement: 22 kW weight of the machine ca.: 15.500 kg dimensions: 4970 x 3260 x 2090 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 18 kW weight of the machine ca.: 13.000 kg dimensions: 5080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2.000 mm control: FAGOR 8055 turning diameter over slide: 470 mm feed: 8 m/min spindle nose: DIN-55027-11 spindle passage: 104 mm number of spindle speeds: 0-1600 U/min/rpm spindle drive: 17/ 20.5 kW Torque: 1590/1920 Nm total power requirement: 28 kW weight of the machine ca.: 4.9 t dimensions of the machine ca.: 6.600 x 2.300 mm Tailstock Tailstock quill diameter: Ø 100 mm Tailstock quill travel: 200 mm Tailstock quill taper: Morse taper MT 6 Turret 4-position automatic turret Machine Equipment Full rear protection enclosure Hydraulic 3-jaw chuck SMW AUTOBLOCK 400 GH Fixed steady rest, capacity 50–220 mm Maximum Permissible Weights Max. workpiece weight between centers: 2,560 kg With 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kg Free-standing, center of gravity at 250 mm: 800 kg The data for this ad was created with ModulMWS - th ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 4500x2000x2900 mm weight: 13.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 11.500 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Evaporator Guntner -Type: S-GHN 080.2H/212-END50.E -Cooling capacity: 61.5 kW at DT8, 49.3 kW at DT7 -Fin spinning: 12 mm -Fans: 2 x 800 mm -Dimensions: 3970 x 1120 x 1400 mm -Electric defrost -Refrigerant: Freon -Volume: 115 L -Weight: 518 kg -Quantity in stock: 1 -Reference number: CH 588 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Evaporator Guntner -Type: S-GHNE 066C/17 -Cooling capacity: 16.8 kW at DT8, 13.3 kW at DT7 -Fin spinning: 7 mm -Electric defrost -Fans: 1 x 660 mm -Dimensions: 1880 x 780 x 970 mm -Quantity in stock: 3 -Reference number: CH 577 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

pressure: 330 t chamfer lenght: 3100 mm distance between columns: 2600 mm Control: Cybelec VisiTouch 24 throat: 500 mm dayligth: 500 mm stroke: 300 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 18.500 kg dimensions: 3900 x 1970 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm Arm length: 500 mm dayligth: 500 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 21.000 kg dimensions: 4850 x 2300 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 6100 mm distance between columns: 5600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 160 mm/s bending speed: 0-9 mm/s total power requirement: 32 kW weight of the machine ca.: 36.000 kg dimensions: 6970 x 2300 x 4150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

pressure: 220 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 3600 x 2000 x 2900 mm weight: 11.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 200 mm dayligth: 480 mm : 200 mm/s bending speed: 0-10 mm/s : 120 mm/s total power requirement: 7,5 kW dimensions: 3600 x 1800 x 2700 mm weight: 8.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 325 mm saw band length: 4200 mm cutting width: 500 mm : 15 - 150 m/min. work height max.: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Very little hours - Hydraulic tailstock - CE Safety doors - Multi Fix Tool holders system  D1 - Chip conveyor

grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air cooler, evaporator, cold storage, refrigerated container, cold room -Area of application: for connection to a cooling system -Fan diameter: 500 mm -Maximum permissible operating pressure: 8 bar -Permissible operating temperature: 100 °C -Pressure at sub-zero temperatures: 21 bar / -60 °C -Contents: 13.2 liters -Slat spacing: 7 mm -Number: 2x coolers available -Price: per piece -Dimensions: 1350/740/H700 mm -Weight: 174 kg/piece

Ceiling light, system light, compact light, control cabinet light, lamp module, transporter light, cargo area lighting, Interior lighting -Manufacturer: GHE-CES, ceiling light 12/24 V -Type: 570 E 179 -Voltage: 12/24V max. 10W -Quantity: 31x lights available -Price: per piece/5 pieces €30 -Dimensions: Ø160 x 40 mm -Weight: 0.2 kg/piece

A fully functional sandblasting system is being sold. Dimensions of working chamber approx. H180 W 150 D160 cm Dimensions approx. H400 W210 L210cm There are 2 lifts available Price per piece 8000 Euro net plus VAT Available from June 2026 If you buy both machines, you will get a basement extraction system with water separator free of charge. See other ads. The plant must be dismantled and transported away by the plant itself. There is only a 2t forklift on site The system is handed over by us without electricity. Article location Nuremberg All information without guarantee

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor with reversing valve -Type: Elmo-G 2BH6 000-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Reversing valve: Wachenhausen GHDM7 -Dimensions total: 430/370/H380 mm -Weight: 38 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: 60 m -Quantity: 1x wire rope available -Shipping/Price: complete -also other crane ropes: available -Transport dimensions: Ø 820 x 620 mm -Weight: 196 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: approx. 53 m -Number: 4x wire rope available -Price: per roll -also other crane ropes: available -Transport dimensions: Ø 750 x 560 mm -Weight: 187 kg/piece

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Delem DA 66S stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 10.000 kg dimensions: 4200x2200x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: piecesﻠ...

Manufacturer: Amada Model: Promecan GHE 630 Type of Machine : Hydraulic Guillotine Shear Find more here - / Contact us at -

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU432X1357 MakeGlatt AG TypeGHT-U-250 Machine number101.145 Year of construction1993 Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1578 Ltr. Max.temp.50 °C Specified Features - Drying oven Drying ovencheck (Hordentrockner) Max. temperature50° Capacity1578 l. Internal diameter1200 x 920 x 1430 mm Internal width1200 mm Internal depth920 mm Internal height1430 mm Steam heatingcheck Number of doors:1 With air circulationcheck With fancheck MotorSupply fan motor: 2 kW Exhaust fan motor: 3 kW Total: 5 kW (motors only) With rackscheck With rack mounted on wheelscheck With trayscheck 24 (3 x 50 x 80 cm) area 9,6 m2 With timercheck Drying ovens Tray sizes500 x 800 x 35 MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchgearcheck (as is) Floorspace1,1 x 1,8 m Total height2,2 m Weight800 kgDryin ...

General SKU050F238 TypeGHT-400 Glatt Horden Trockner LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Max.temp.100 °C Specified Features - Drying oven MaterialStainless steel 1.4301 (304) Drying oven(1x), make Glatt AG Pratteln Max. temperature100 Degr. C. Number of compartments:2 Capacity2x 900 Ltr Internal width700mm Internal depth950mm Internal height1300mm Steam heatingcheck Number of doors:2 With fancheck Motor3,3 KW, 380/660 Volt (Ex) With rack mounted on wheels(2x), With 15 slots each 500x800mm With trays/With 29 product containers each 495x800x35mm Information No.101010 Year of construction1991 With switchgearcheck Floorspace2,6x1,3 M Total height2,7 M Weight1600 KG ATEX compatiblecheckDrying ovensDiscountGlattDryers > Drying ovensDiscountBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a ...

with separate hydraulic power unit

Information: Pick-up also in 48155 Münster for an extra charge in the amount of 50.00 euros net per barrel.

CEE Socket, Socket, Safety Wall Socket STEEL GHG 561 1402 VO ( GHG5611402VO ) EX 5633 PD 15 A 380 V AC IP54 explosion proof ! New !' Dimensions: 190 x 120 x 110 mm

CEE Plug, Plug,Safety Plug STEEL GHG 584 1207 VO ( GHG5841207VO ) EX 58-5842 PS 15 A 380 V AC IP54 explosion proof ! New !' Dimensions: 160 x 100 x 95 mm

Terminal box BBC GHG 782 0103 VO 380 V AC 440 V DC IP54 explosion-proof ! New ! Dimensions: 150 x 100 x 80 mm

Limit switches, motor switches, load switches BBC GHG 363 1003 VO ( GHG3631003VO ) EX 3642 LR 16 A 380 / 500 V AC IP54 explosion-proof ! New !' Dimensions: 250 x 100 x 90 mm

Limit switch ABB CEAG GHG 391 0303 VO ( GHG3910303VO ) EX 3935/3 PH 6 A 380 V AC explosion-proof ! New ! Dimensions(packaging): 160 x 130 x 100 mm

Twist drills, automatic drills GÜHRING GHFW Ø 30 mm HSS DIN 1897 New ! Dimensions: 210 x 50 x 50 mm

Pump on 24 volts Hydraulic ramps Auction-ID: A3-44484-6024

Complete with ramps. In good condition. Auction-ID: A3-44484-6026

Laptop ACER Swift SF113-31 Pentium N4200 1.1 GHz 4 GB RAM 120 GB SSD, S/N NXGNKEG00673504BDE7200, no power adapter, without software, internal NBSBG056