gh used for sale

water cooler, table cooler, recooler make Güntner, approx.1000KW cooling capacity, Device with 12 fans,throughmeser 1000mm. 416 litres capacity. 12000mm length, 2400mm width, 1500mm height, 8 feet, weight 2950KG.

Air conditioner for fully automatic climate control, NEW

One used flexible welding line EVG GH400 for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Günther air cooler for the ceiling or for the wall

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 1500 kg traversing speed: 200 m/min total power requirement: 55 kW dimensions of the machine ca.: 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT 4 servo motors for all axial movements CNC CONTROL PANEL 15 5” touch screen IPG laser sources and coolers integrated Precitec Procutter cutting head system AIR FILTER (compressed air filter) CONVEYOR BELT under cutting area Closed housing and specially coated filter protection windows LOADING / DISCHARGING SYSTEM PROPORTIONAL GAS AND PIPE SYSTEM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer GEMINI Model GHT4-720 x 2,000 Year 2002 FAGOR 8055 CNC Capabilities Max. Ø turning on bed / carriage 720/470 mm. Height of points on flat guide 366 mm. Distance between points 2,000 mm. Fast Forward X/Z Axes 8 m/min Head Nose Head DIN-55027-11 Main shaft hole diameter 104 mm. Head Revolutions 0-1600 No. of Automatic Head Ranges 2 Main Motor Power 17/ 20.5 kW. Maximum torque 1590/1920 Nm Counterpoint Tailstock shank diameter 100 mm Tailstock shaft course 200 mm Morse 6 Tailstock Rod Housing Equipment 4 Post-Automatic Turret. Full Rear Protection INCLUDED Universal 3 Claws Plate INCLUDED Fixed bezel Cap. 50/220 INCLUDED Maximum permissible weights Max. piece weight between points 2,560 kg With 1 bezel / With 2 bezels 3,200/4,000 kg Rim-in with center of gravity at 250 mm. 800 kg Others Total power 28 kW Machine weight 4,900 kg. Machine Di ...

Cool Guntner Type: GHNE 065C / 28 Cooling capacity: 30 kW with DT8, 23 kW with DT7 Fin spinning: 8 mm Electric heaters Number of fans: 2 x 650 mm Device dimensions: 3000 x 750 x 1000 mm Refrigerant: Freon Capacity: 46 L Stock status: 5 pieces Stock number: CH 236 Condition: Used Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

Mower containers and mulchers Working width 1.50 m, 3-point attachment cat. I/II, for PTO 540 rpm. Capacity approx. 2500 ltr. Equipment: Height-adjustable front wheels, support roller, height-adjustable rear landing gear. (3 hydraulic connections required (dw/ew). Lighting system according to StVZO. For mowing and/or scarifying (scarifying knife optional required) of grassy areas. The mown material - including horse droppings and leaves - can be picked up and then transported away at the same time. Required tractor power: 26 kw / 35 hp. High stability during the tipping process and problem-free road transport due to rear landing gear. Emptying height max. approx. 2.20 m (factory specifications). Age-related wear and tear and paint defects/rust present, but still operational. Alternatively, we also offer Reiser mowing containers with a working width of 1.30 or 1.50 m as well as a W ...

Cool Guntner Type: GHN080.2F/210-E Cooling capacity: 54 kW at DT8, 43 kW at DT7 Surface: 235 m2 Air flow: 37 320 m3/h Fin spinning: 10 mm Electric heaters Fans: 2 x 800 mm Dimensions: 4000 x 900 x 1300 mm Refrigerant: Freon Volume: 86.5 l Waga: 460 kg Items in stock: 3 Reference number: CH 392 Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4230 Kg approx.

Control unit, control panel, control panel, control unit, keyboard, screen, control -Comes from a CNC machining center -Manufacturer: Visual Data -Type: MC31 GHEB1 HOM -Dimensions: 482/365/H265 mm -Weight: 12 kg

Make: THERMOKEY Type: GH249CXD/02VQRAFS Year of Make: 2019 Volume: 349 liters Pressure: 10 bar Max. temperature: +95 °C Min. temperature: -40 °C Fan: Ø 900mm with 8 fans AKAD 900-6-6 A2 incl. speed control via SELPRO frequency converter and temperature sensor (from 0%-100%) incl. wiring up to the control cabinet 2 pcs. available Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Gearbox, spur gear, angle gear, worm gear -Manufacturer:GHIRRI CESARE, worm gear type VQ 03 -Translation: R. 1/10 -Hollow shafts: Ø 11 x 28 mm / Ø 14 x 62 mm -Dimensions: 105/90/H110mm -Weight: 1.3 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder stroke 150 mm -Type: HN3-GHI 80/55-150 DH -Piston rod: Ø 55 mm / M34 -Hole: Ø 40 mm -Dimensions: Ø 128 x 545 mm -Weight: 24.4 kg

One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm

Socket outlet, flush-mounted boxes, touch-protected boxes, Schuko socket, explosion-proof wall socket -Manufacturer: CEAG, Ex-wall socket 220-240V 16A unused original packaging -Type: GHG5114306R0001 -Number: 1x power outlet available -Carton dimensions: 290/110/H175 mm -Weight: 1.1 kg

Screw compressor Manufacturer: GHH Rand Model No.: CS80/3 Speed range: 2000 - 2950 Max. volume flow: 710 m³/h at max. working pressure 2.5 bar max power consumption 48kW The compressor is in good condition. Signs of use are present. for more details see pictures

Socket outlets, flush-mounted boxes, touch-protected boxes, Schuko sockets, explosion-proof wall sockets, power connectors -Manufacturer: CEAG, Power connector EX plug 16A 3-pole unused original packaging -Type: GHG5117306R0001 -Number: 1x power outlet available -Cardboard dimensions: 200/95/H100 mm -Weight: 0.3 kg

CEE plug -4-pin connector -16 A -Type: GHG 531 7406 V 0 -EX Protected -Weight: 0.5 kg

CEE wall socket -Construction -5 pole -Type: GHG 531 4506 V0000 -EX Protected -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Length: 300/230 mm -Height: 35 mm -Weight: 4 kg

Vacuum Pump Atlas Copco GHS 900VSD Vacuum Pump Year: 2020 - Ultimate pressure: 0.35mbar(a) 0.26 Torr 35.0 Pa - Voltage: 380-460V - Frequency: 50 / 60 Hz 3pH - Pmotor: 15.3kW / 21hp - N: 700 r/min - Weight: 520Kg - Year of construction: 2020

Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: GHUZ050E13A0 -Connection: 24 VDC -Stroke: 20 mm Price: per piece -Quantity: 3 available -Weight: 1.6 kg

Evaporator Guntner Type: GHN 050C/38 Cooling capacity: 29.6 kW at DT8, 23.2 kW at DT7 Fin spinning: 8 mm Fans: 3 x 500 mm Dimensions: 3650 x 650 x 650 mm Volume: 37.8 L Quantity in stock: 18 Reference number: CH 538 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control

Manufacturer: Unimac-Gherri Series: Tappatore Mod. Cap. 4-Plastic Year: 2010 Capacity: 10,000 b/hr Formats:current 850ml Specifications: - Voltage 400 V - Frequency 50/60 Hz - Nominal power: 4 kW

turning diameter: 1000 mm turning length: 4000 mm turning diameter over bed slide: 680 turning speeds: 0 - 1400 U/min control: Siemens 810 D tool turret - number of stations: 2 centre distance: 4000 mm drive motor: 30/37 kW Torque: 4140 Nm bed width: 550 mm max. workpiece weight between centres: 4800 kg max.workpiece weight:each extra steadyrest: 700 kg spindle diameter in front bearing: 150 mm spindle bore: 104 mm total power requirement: - kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7 x 2,8 x 2,16 m equipped with: - CNC control Siemens 810D ShopTurn - jaw chuck - steady rest - 2-fold steel holder 23500h switch-on hours, 9300h spindle running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: . V 0: . Hz 0: . kW The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various machine parts are available. 1) Siemens Sinumerik 840D PCI/ISA-BOX, Siemens Sinumerik 840D, MMC103, Sinumerik 840D CNC full keyboard XT/AT. 2) 2x load contactor Siemens 3RT1054-6AP36. 3) Tachometer Baumüller GHT S42.

Used plastic agglomerator, model GHX 300. New: 2021. Technical data: - Capacity 300 liters, - Recommended feed 200 liters, - Efficiency 220 kg/h (PE / PP PET / PA films), - Automatic or manual water supply, - 75 KW engine, - Installed set of six sets of fixed knives, - Rotating arm with double-sided knives, - Knife material 9 CrSi, - Pneumatic agglomerate discharge with the possibility of setting in automatic or manual mode, - Good condition / Used for only one year.

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ghiringhelli M500 SP600 MIA, centerless grinding machine, Grinding wheel width: 650mm, Grinding wheel Diameter: 600mm, Grinding wheel motor 75kW, Overhaul and CNC retrofit possible. Feel free to ask for more info., It can be inspected in our warehouse in Gussago BS (Italy), Mimu machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly w ...

centerless grinding machine GHIIRINGHELLI M200 SP500 with MIA grinding wheel 200x500 Interesting price The machine is visible working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Grinding wheel width: 200, Grinding whe ...

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4315Kg approx. machine and 60 Kg box

bore capacity in steel (diameter): 28,0 mm throat: 320 mm bore stroke: 150 mm morse taper: 3 MK table:: 500 x 350 mm turning speeds: 75 - 3010 U/min total power requirement: 1,35 / 1,7 kW weight: 290 kg range L-W-H: 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 1 ...

bore capacity in steel (diameter): 25.0 mm throat: 255 mm bore stroke: 120 mm morse taper: 3 MK turning speeds: 105 - 2900 U/min table:: 395 x 420 mm column diameter: 100 mm threading: max. M10 voltage: 400 / 50 Hz V weight: 140 kg range L-W-H: 500 x 570 x 1100 mm Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Full C-Axis 360.000 - Driven tools Axiaal & Radial  - Driven tailstock -  Steady rest C-Type - Front chuck with 180 bore - Rear chuck with 180 bore - 3 guide way bed width 750 mm

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...

Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: piecesﻠ...

A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible.

Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance

Key data: 3080 mm, 6 mm

max. sheet thickness steel (450N/mm²) 6.5 mm max. cutting width 3080 mm Machine weight 5600 kg Very good, ready-to-use condition

pressure: 185 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 175 mm/s bending speed: 0-12 mm/s total power requirement: 22 kW weight of the machine ca.: 15.500 kg dimensions: 4970 x 3260 x 2090 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.