Contact:
Alexander Kosir/
+436641029345/
a.kosir@tbauctions.comI
Induction hardening machine for ZF shafts or components with similar
dimensions
Feeding:
The machine is operated from the front, and the workpieces are placed
in holders on the turntable for machining. The rotary indexing table
feeds the workpiece into the machine for machining. The machined parts
are removed at the same station.
The light display located directly above the operator is used to sort
the workpiece as an OK or non-OK part.
Hardening 1:
Once the rotary indexing table is positioned, the recirculating ball
indexing table lowers the mixer into position. A weighted top
counterweight rests on the part, preventing it from lifting. The part
is controlled by a magnetic coupling below
of the rotary indexing table. A sensor checks the correct rotation. An
inductor heats the part to the set hardening temperature.
The recirculating ball indexing table lifts the hardened part into
position. Once the part is hardened, the recirculating ball rail table
moves to the up position.
Tempering:
Once the rotary indexing table is positioned, the recirculating ball
rail table lowers the mixer into position. One
Weighted top counterweight S51224454 rests on the part and prevents
it from lifting. The part is replaced by
a magnetic coupling under the rotary indexing table. A sensor checks
the correct rotation.
An inductor heats the part to the set temperature. The ball screw
table is inserted into the
upper position.
Hardening 2:
Once the rotary indexing table is positioned, a pneumatic actuator (4)
lowers the hardener (5) onto the part. First
the part is cooled to room temperature with a coolant. It is then
dried with compressed air.
Auction-ID: A7-41285-2
