germany used for sale

Offset printing machine Manufacturer: Heidelberg Model: GTO 46+ 32x46 cm Location: germany Price: on request

DATA ON THE MACHINE Machine type: Profile steel shears / unclinking machine Manufacturer: MUBEA Muhr u. Bender Model: BF11N Condition: used Price: 1,450 Euro net plus VAT Location Warstein , Germany Reference M-MUB-1220 Description We offer you a used profile steel shear from the manufacturer MUBEA Power 32t Weight approx. 1t Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Note - please read ! --> The motor runs well, the generator does not generate voltage --> A used replacement generator can be purchased for an extra charge (see picture 5) - - - - - Lister generator set 20 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 20 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was made - The engine starts and runs well - The generator does not generate voltage - - - - - Scope of delivery: - Lister generator set 20 kVA - consisting of motor and generator - installed on a metal base frame - For an extra charge a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exac ...

- Manufacturer: Bekum - Machine type/ Machine type: BA 34.2 - Stations / Stations: Single Station/ Single Station - Built: 2001 - Location / Location Germany - Control type/ Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Dimension dimensions mm /mold dimensions mm (A length/ length x W width/ width x C depth/ 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Screen language/ Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight/Weight (kg): 13000

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Haas TRO 140G Price: 110,000 € Machine No: 18767 Built: Number of baking tongs 140 , 2 baking places per pliers Upper engraving without Underengraving 5 x 5 mm Rand yes Tool 22°30' Power consumption: approx. 2.5 kw/h Gas consumption: approx. 24 m3/h Location: Germany The machine is used for the production of sweet, twisted squirrels with standard industrial size and flattop. Winders, conveyor belt, ready-to-wearer, metal detector and stacking table are included. The machine is in a well-maintained condition. The machine is currently stored. Haas, GAM, Steinhoff, Walter, Industry

Used Autoclave PANZER, Type: 700E Electric autoclave with 700 litre boiler volume, with quick release and threaded spindle - Made in Germany - Completely made of high-quality stainless steel - All safety equipment (the latest requirement of the Pressure Vessel Ordinance) - Including all necessary certificates - Full car. Control by F-value controller - Full car. Control of operating temperature, core temperature, pre-selection and operating time clock - Content: 700 litres - El. Power: 54 kW - Operating pressure: up to 2.5 - 3.0 bar - Temperature range: Up to 130°C

DATA ON THE MACHINE Machine type: Roller curve conveyor / 90 degrees Manufacturer: Transnorm Model: 816-500 Built: 2007 Condition: very good (used) Price 1,200 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221 Description We offer you a used roller conveyor from the manufacturer Transnorm, incl. feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

DATA ON THE MACHINE Machine type: Roller conveyor / roller conveyor Manufacturer: Transnorm Model: 2900 Built: 2007 Condition: very good (used) Price 950 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221-1 Description We offer you a used roller conveyor from the manufacturer Transnorm, excluding feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

Make: TRUMPF Type: TRUMATIC L 3030 RotoLas Built: 2002 Working range: 3000 x 1500 mm Laser power: 2000 watts Engine hours: 54,000 Control: Siemens Sinumerik 840D Standard: Closed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000 high frequency excited, mirror telescope, cooling unit, logbook function Automatic pallet changer and longitudinal conveyor belt Drives: Maintenance-free three-phase servomotors HI-LAS High-pressure cutting Plasma Sensors (PMS) Fast editing with SprintLas ContourLas for making small holes Cutting gas pressure setting programmable Laser cutting head with 5" lens and laser cutting head with 7.5" lens, DIAS III Cutting head quick-change device Position laser diode Automatic focus position setting AutoLas Plus Logbook function Laser Oil spraying device for safe thick sheet processing Auto shut-off Workspace lighting  ...

Lister generator set 16 kVA Year of construction 2007 - AVR ESC - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 2 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Condition: -Used - A test run was made - The engine starts and runs well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Lister generator set 16 kVA - consisting of motor and generator - installed on a metal base frame - incl. exhaust - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inquiry with your postal code - - - - - Price and payment: - Price: 4350,- € + 19 % VAT = 5176,50 € - Payment: Pr ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Control: Siemens 840D Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 9 Z - Path mm: 510 Y - Path mm: 510 X - Path mm: 835 Speed m/min: 30 Tool holder: HSK 40 Table load: 800 kg Clamping area mm: 1,000 x 560 Machine footprint mm: 2,100 x 2,700 Machine weight approx. kg: 4,200

Machine details Bearing number 1105-03191 Machine type flat grinding machine Make sit Type RP 800 Built in 1991 Control type NC Warehouse LAGER Country of origin Germany Delivery time immediately Freight base from the exhibition hall, free Technical details Grinding length 800 mm Grinding width 400 mm Workpiece height 475 mm Table length 1100 mm Table width 500 mm max. workpiece weight 700 kg Auto. Cross feed adjustable 3-50 mm/stroke Vertical delivery, 1 tick mark 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore diameter 76.2 mm Connection voltage 380 V Grinding spindle motor 3.7 / 4.5 kW Total power requirement 4.5 kW Machine weight approx. 4.5 t Room requirement approx. 3500x2000x2700 mm Information Automatic delivery, - Electro-magnetic clamping plate with straight fine pole division, dimensions 800x400mm  ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

Perkins generator set 20 kVA with AVR controller - - - - - Engine: - Perkins (England) - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Condition: -Used - A test run was made - The engine starts well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Perkins generator set 20 kVA - consisting of motor and generator - installed on a metal base frame - incl. exhaust / silencer - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inquiry with your postal code - - - - - Price and payment: - Price: 4650,- € + 19 % VAT = 5533,50 € - Payment: Prepayment - An invoice with VAT is issued - ...

DATA ON THE MACHINE Machine type: CNC milling machine Manufacturer: HERMLE Model: UWF1001H Built: 1991 Condition: used Location Warstein , Germany Reference M-HER-0221 Description We offer you a used CNC milling machine from manufacturer Hermle. Control Heidenhain TNC 407/415 Monitor new x-path 700 mm y-path 550 mm z-way 500 mm Table clamping area 650 x 395 mm Spindle speeds - infinitely 20- 4200 rpm Spindle holder ISO 40 DIN 2079 Pinole stroke vertical 95 mm Drive spindle motor 12 kw Machine weight approx. 3.8 t Space requirements approx. 5 x 4.6 x 2.5 m Electrics 400 Volt Coolant device Fixed angle table 1000 x 490 mm Vertical milling head swivel. +/- Full-protection cabin Separate control cabinet (absolutely clean and uncrafted) electronic handwheel Our offer is aimed at professionals who are covered in accordance with the Trade Code in accor ...

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

Large format printer Manufacturer: Roth and Weber Model: 3300-6 Year: 2004 Equipment 6-roll fully automatic machine Number of prints 399,369 sqm Availability: now Condition: Defects 1 piece of heating lamp must be replaced Location: germany Price: on request

Thermal CTP Platesetter Manufacturer: Heidelberger/Creo Model: Trendsetter 3230 Laser new, 440 hours year: approx. 1997 Location: germany Price: on request

CARRAGARM RACK NEW Data: H : approx. 426 cm D : approx. 137 cm L : approx. 403 cm Cantilever : approx. 120 cm Axial dimension: 131 cm NEW GOODS immediately from stock. 675 kg load per arm 2700 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 4 storage levels (5 storage levels) Shelf consists of: 04 x stand, incl. base approx. 426 cm made of IPE180. 16 x cantilever arms approx. 120 cm made of IPE 100 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pa ...

Machine Details Stock number 1105-03811 Machine type CNC lathe - inclined bed machine Brand GILDEMEISTER Type CTX 410 Year of construction 2004 Control type CNC Control HEIDENHAIN TURN PLUS Storage location FRANCE Country of origin Germany Delivery time available at short notice Freight Base EX WORK Technical details Turning diameter 320 mm Turning length 600 mm Turning diameter 320 mm Travel - x 260 mm Travel - z 635 mm Orbital diameter 680 mm Orbital diameter via slide 365 mm Spindle bore diameter 87 mm Turret head (x-fold) 12 Main spindle speed heidenhain turn plus 1/min Rapid traverse X + Z - axles 24/30 m/min Drive power - spindle motor 21 kW Control HEIDENHAIN TURN PLUS Power supply 40 kVA Information control HEIDENHAIN TURN PLUS 2 AXIS MACHINE 12-fold turret VDI 30 Spaneforderer

Machine details Bearing number 1105-03199 Machine type Milling machine - Universal Make DECKEL MAHO DMG Type DMU 70eVolution Built in 2001 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time by arrangement Freight base from location Price Technical details x-path 750 mm y-path 600 mm z-way 520 mm Control HEIDENHAIN iTNC 530 Information Milling machine - Universal DECKEL MAHO DMG DMU 70eVolution NC Swivel Round Table (700X500) Spindle -------------------- Spindle speed: 18,000rpm Tool holder: SK40 Tool changer -------------------- Magazine places: 32 Pick up Facilities -------------------- Measuring probe Conveyor 2. Processor card electronic handwheel HR410 Blowing air M25 Rinsing gun

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

Machine type Electrode inverter welding rectiveror with bi-power setup Make Merkle Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Adjustment range 20 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes 100% ED at 210 amperes Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter by built-in fan Version of portable assembly line Special accessories Bi-Power-Device Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 5 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with  ...

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Description: Very well preserved heavy-duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Details: Model PT1-1070II Year of construction 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Geometry Santer turret Turning diameter over bed 1,070 mm Turning diameter via support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm. Quill diameter 200 mm Quill stroke 350 mm Spindle passage 128 mm Conveyor Drilling rig incl. boring bar length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Bezel 4 quill 500 mm open Main drive motor 71 kW incl. documentation

screen printing machine: Manufacturer: Borghoff & Wilk GmbH Model: DupIomatic-R Year: 1987 screen printing machine for curve printing electro-pneumatic Planetary gear with 3-take-up positions, squeegee device pneumatic squeegee head with vertical lift and fine adjustment conversion kit for conical objects (approx. 7.5 °) Rack and pinion drive possible Equipment: 3 flood squeegees (100mm, 150mm, 190mm) 6 squeegee holders (2 x 100mm, 2 x 150mm, 2 x 200mm) rack 800mm length, various gears and drive wheels Location: germany Price: on request

Machine type: TIG inverter welding system water-cooled direct and alternating current system Make: Merkle Type LogiTIG 300 AC/DC Serial No. 123.146 Connection voltage 3 x 400 volts Setting range 3 – 300 amps Duty cycle 50 % d.c. at 300 amps 60% d.c. at 280 amps 100% d.c. at 250 amps Current adjustment infinitely variable max. weldable material thickness steel / VA = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 amps Special accessories touchpad, display cover Connection for water cooling Carriage Dimensions L x W x H 670 x 240 x 1,025 mm Weight 67 kg Age: 4 years Condition: workshop-tested, very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable  ...

Pad printing machine: Manufacturer: Tampomark Model: TM 85-2 C year: 2010 (ran very little) closed color system 2-colored electro-pneumatic Technical specifications: Cliché format: 100mm x 200mm Squeegee cups: W 85mm Printing format max .: 75mm Printing force: 110 kg Output: up to 1200 cycles / hour Weight: 136 kg Pneumatic connection fine filter: 6 bar Operation: Digital display with piece counter Equipment: Machine base on castors, height-adjustable cross table 2 magnetic holding plates 2 squeegee cups (including 4 new squeegee rings) 2 pad holders incl. Pneum. Pad displacement foot switch Location: germany Price: on request

A quadroblock of Krones SUPERBOLCK is offered All machines are powered by cardio-shafts and please and a synchronous movement of the bottles. This achieves outputs of up to 37,000 bottles per hour. The system includes the following machines: Exhaust Rinser: Kom 560-002 Vacuum Filler: Kom 307-551 Shooter: SV 15 Etyma: Starmatic 24-8-8 Kom. 090-952 Bottle format: 20ml (can be adapted to customer requirements) Capacity: 7000-37000 bottles per hour Built: 1994 Plant condition: The system is completely overhauled Made in GERMANY For more information please contact us. Tel.: +49 6061 968 78 22 or email: v.gurin@allfill.de

Machine type MIG/MAG welding system Make Merkle Type CompactMIG 220 K Connection voltage 3 x 400 volts Setting range 25 - 220 amperes Switch-on time 40% ED at 220 amperes 60% ED at 170 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 90 kg Special Accessories Display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Machine details Bearing number 1105-02750 Machine type Machining center - Universal Made DMG DECKEL-MAHO Type DMU 50 eV / 5 axes Built in 1998 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-path 500 mm y-path 420 mm z-way 380 mm Control HEIDENHAIN TNC 430 Spindle cone HSK 63 Speeds 18,000 rpm Spindle motor 15 kW Rapid response 50 m/min Table clamping area 500 throughs. x 380 mm Feed range up to 20 000 mm/min Tool change device 32 fold Total power requirement 38 kVA Machine weight approx. 5.9 t Information - CNC - Screen web control HEIDENHAIN TNC 430 5-axis machine with B +C axis SIMULTAN - Machine documents spaenefoerderer

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 DW Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 170 kg Special accessories display, automatic wire, VB cable 1.6 mtr. Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 K Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Execution of mobile industrial plant Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 480 x 760 mm Weight 140 kg Special accessories display, automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1  ...

Machine type Electrode inverter welding rectiveror Make Merkle Type MobiARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 330 x 140 x 230 mm Weight 6 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece slag hammer heavy execution 1 piece steel wire brush 2-row 25 pie ...

Iveco emergency generator 440 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Iveco (Italy) - Model: Cursor 13 TE3A - 6 cylinders -Diesel - 1500 rpm - Displacement: 12880 cc - - - - - Generator: - Manufacturer: Stamford (England) - 400 / 440 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 395 x 130 cm - Weight: 3700 kg - Tank volume: 230 litres - Sound level: approx. 67 dB (7m) - Fuel consumption: 70.4 l/h (75%) - - - - - Other: - An integrated socket package can be ordered for an extra charge - This probably includes: 1x 400V 32A, 1x 400V 63A, 1x 400V 125A  ...

We offer a used Tetra Pak® A3 Flex 300V 1000ml Edge filling line in exceptional condition. Line components: -A3/ Flex 0300V aseptic filling machine. Format 1000ml Edge -Accumulator Harness Helix 50 m -Lid Capper Tetra Pak Capper 25 -Cardboard packer Tetra Pak CBP32 -Conveyors Highlights: – Excellent condition – Year of Make 2010 – Immediately available ex-factory UGM Germany The line includes the following components: FILLING MACHINE: Model: A3/Flex Year of make: 2010 Format: Edge Capacity: 7000 pph Volume: 1000 ml Working hours: 31843 ACCUMULATOR: Manufacturer: Hartness International Model: ACHX30-0700-50m Year of make: 2014 CAPPING MACHINE: Make: Tetra Pak Model: Lid Cap 25 Year of make: 2011 CARDBOARD PACKER: Make: Tetra Pak Version: 0400 Model: CBP32 Year of Make: 2010 CONVEYOR SYSTEM: Tetra Pak®

Used automatic labeling machine for cylindrical packaging, for self-adhesive labels (paper or foil), produced by ETMA, Germany, model R-TB - 150/2000. New: 1995 Marking labels with batch number / expiry date: hot-stamping.

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum wor ...

Table diameter: 800 mm Y-way: 800 mm X-way: 800 mm Extension: 700 mm Stroke length: 40 - 210 mm Stolin creation: 350 mm Lifting speed: 10 - 56 ppm. Swivel head: 10° left/right Installation height: 500 mm (from table) 3-jaw chuck diameter: 700 mm Engine power: 4.4 kW Country of origin: Germany Transport mass LxWxH: 2700 x 1700 x 2300 mm Machine Weight: 4500 kg

Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...

Digital Printing System Manufacturer: Canon Model: OC ImageStream 3500 Year: 2015 with Highspeed Printing Transport System MJP30CX-M11002 paper acceptance- / unwinder OCE ImageStream digital control panel Hunkeler Webinspetion W1630/42" year 03/2015 TFT Monitor ELO 2 Technotrans Beta K320L Year: 07/2014 cooling system server rack Supplies Located Germany Price: best offer Must be moved within two weeks