german used for sale

Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg

brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

MAGNETIC SEPARATORS, in form of overbelt plates,, grids, channels, stars, etc.

Including: Injector Hopper Pipe connection diam. 160 mm. Bends Clamps Cyclone Customized to your project

We are selling a large-capacity 3D printer X1000 from German RepRap GmbH. The device is in good condition and has been serviced by Innovatiq., Scope of delivery:, - 1 pc. 3D printer X1000, - Small parts and remaining consumables, Installation space in mm (x/y/z): 1000 x 800 x 600 mm, build speed: 10 – 150 mm/s, Travel speed: 10 – 300mm/s, Layer thickness: 0.02mm, Filament diameter: 1,75 mm, Nozzle diameter: 0.4mm / 0.6mm / 0.8mm, extruder units: DD3 Dual, Extruder temperature: max.290°C, Print bed technology: Heatable up to 120°C, Data transfer/network: LC touch display, wireless printing via WLAN, Ethernet, software: Simplify3D Software, Power consumption: (max.) 2.5kW, approx. 30% in continuous operation, Power connection: Three-phase current 400V (CEE 3L+N+PE), 16 A, Dimensions in mm (w x h x d): 1725 x 1500 x 1320 mm, Weight in kg: 400 kg

DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...

Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Big Bag, 1-place holding structure, complete with supporting hooks, Constructed in solid, painted carbon steel, single place, Machine reconditioned

SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), when asking for a quotation, please detail:, - Type of extruder, - screw (s) diameter, - production rate in kg/h, - material tyupe, - material MFI, - contamination and average %, - filtration required in mesh or my, type: Semi-automatic, non-stop

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, capacity: 100-3.000 KG.

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials

AIR DRYING TUNNEL, for strands, dimensions 2.000 x 300 mm. (or bespoke), blower on bottom with 2 conveyors which send air through slits, constructed in AISI304 stainless steel

VIBRATING SCREN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good  ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, Possible additions: horizontal loading screw and hopper + cyclone on top + collector with dust sleeves piping + bag holding structure+bag weighing station + PLC fo ...

VERTICAL MIXER, 5.000 lt.capacity Total height approx 5.000 mm Max diam. 1,850 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 600 x 500 mm. Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 7,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 7.5, capacity: 5.000 lt.

3,0 m3 capacity Total height approx 4.000 mm Max diam. 1.600 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 900 x 740 h 830 Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 5,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 5.5, capacity: 3.000 lt.

VERTICAL MIXER 14.000 lt., Total height approx 5.500 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 2,4 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials

VERTICAL MIXER, 8 m3 capacity, total height approx 4.500 mm including transmission group, max Ø 2.200 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11

PLC CONTROLLED MIXING, BAG FILLING AND WEIGHING SYSTEM, for plastic granule, customized to the project, including [vertical mixers](.germanplast.eu/it/annunci/4309783-vertical-mixers-from-5-to-3 0-m3), buffers,, pneumatic system with deviators, cyclones, .., with and without loading screws, loading cells, digital display, visual and sound alarms, all managed by a PLC

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...

WEIGHING SYSTEM FOR BIG BAG SUPPORTING AND FILLING STATION, The system includes a sturdy painted carbon steel structure to hold 2 big bags, the pneumatic system to fill them from a source, a diverting valve set to fill the bags alternatively and automatically, a weighing platform on which tha bag rests, with loading cells and a digital scale to check and set the weight of each bag ., price options: new machine bespoke to project

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](.germanplast.eu/listings/4115725-drying-system-for-vertical-mi xers), price options: size and shape bespoke to project

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

OPTICAL VIS+NIR SORTER, increase the quality of your product with a very economical, highly performant solution., Effective separation: Removes impurities, different colors, and other contaminating materials., Sample memory: Learns from samples to separate based on texture and color., Improved quality: Enhances product quality, ideal for the recycled plastics market., Quick assistance: Fast intervention from an Italian company. 24/7 response and quick intervention and assistance from this small, versatile Italian Company., Suitable for various materials: Can sort PET, HDPE, PP, PVC, PC, ABS, PMMA, and more., Customizable: Available with 1-6 channels., NIR technology: Detects stones, glass, soil, and other dense bodies., Polymer detection: Identifies different polymers using short-waved infrared cameras., A.I. software: Learns from previous selections to improve over time., Compact size:  ...

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 3 operators per shift, required space : about 30 x 22 mt., calculated on a 220 days/year 8 h/day = 3.520 T/year - 16 h/day = 7.040 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 2 Ton/h in input (throughput rate depends on feeding rate and on the kind of tires), installed power : about 650 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - available manual (20-25 tyres/h) or automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return  ...

with bespoke exchangeable screen (8-10-12-14-16 mm….), to obtain a more uniform size on agglomerated materials, new machine, complete with lifting auger which collects, material from the discharging hopper of the agglomerator. constructed in a state-of-the-art manner with safety devices side doors basket size about 1.500 mm x diam.600 mm. (or bespoke) gearmotor 0,75 kw screw diam. 220 mm 1,5 kw It can be completed with a pneumatic extraction system to bag filling station or vertical mixer, price options: new machine, bespoke to projecr

CONVEYOR BELT, Sturdy steel construction,, belt width 450 mm,, total length 8 500 mm,, inclination change 45°,, PVC belt L450mm, with applied trapezoidal guides,, corrugated edges, H50 mm and flights H50 mm L250mm,, idler roller diam.219,, outlet 500x150mm,, side rails,, 0.75 kw gear motor, rust-proof+enamel paint

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm, Power: 75 kw

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm. (59.06), Power: 100 Hp 75 kw

SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...