generator 200 kva used for sale

General SKU345S753 MakeHinke Tankbau GmbH (AT) LocationBarneveld CEcheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2000 Ltr (2940 Ltr) Vessel sizesdia.1400x1500 mm Dished bottomcheck Dished top sidecheck ManholeDN500/400 Top connectionsDN200, DN150, DN100,, DN80, DN50 OutletDN50 Half coil jacketed(66+18 Ltr) Max. temperature-25/200 °C With paddle stirrercheck dubble Motor5,5 kW 400/690 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.8290 Year of construction2000 Floorspace1,9x1,9 m Total height4 m Weight1400 kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & ...

General SKU316W641 LocationBarneveld CEcheck MakePrestel GmbH Main Features Motor4 KW Length3600 mm Inlet diameter150 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4541 (321) Horizontal conveyor screwcheck Trough-typecheck Length3600 mm Between inlet and outlet2500 mm Shaft diameter90 mm Pitch200 mm Inletø 150 mm Outletø 210 mm Motor4 kW (400 V, 1440 rpm) Screw speed45 rpm With coverscheck Information TypeTRS- 200 H9007/1 Mach.No.KOM132 Year of construction2019 Floorspace3,6 x 0,3 m Total height0,5 m Weight250 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesA ...

General SKU020Y106 MakeDrais Mannheim TypeTurbuMix TM-200E FM1 No.56 008 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Volume200 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-armscheck Capacity200 l. Useful capacity60-148 l. Trough sizesø 600 x 750 mm Inlet275 x 600 mm Inspection hatchø 600 mm Outletø 120 mm Motor7,5 kW 400/690 V Speed mixing shaft± 125 rpm With lump breakercheck Motor7,5 kW 400/690 V Speed lumpbreaker1450 rpm MaterialStainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,5 x 2,1 m Total height2,1 m Weight2500 kgCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder turbo mixersSpicesOther c ...

General SKU236W261 LocationBarneveld MakeHermann Waldner Type4750L No.2140 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4750 Ltr( netto 2000 Ltr) Vessel sizesDia. 1800x2685 mm Conical bottomcheck Manholecheck DN600 Top connectionsDN50, DN40 OutletDN 100 With jacketcheckJacket room 1, volume 45 Ltr, jacket room 2, volume 105 Ltr. Max. temperature165°C. With anchor stirrercheck With scraper With paddle stirrercheck screw stirrer Counter rotating stirrercheck Motor4,4 kW, 380 volt / 7,5 kW, 380 volt Speed mixing shaft50 rpm and 30 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Year of construction1993 Mounted on legscheck With switchgearcheck Floorspace5,0x ...

General SKUR1097 LocationBarneveld MakeDrais Werke GmbH (D) TypeTR-2000 A No.51373 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket5 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor20 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 ltr Trough sizesdia 1200x1700mm Inletdia. 450mm (1x), dia. 200mm (1x) Outletdia. 200mm With jacket(128 ltr) Shaft can be heatedcheck Max. temperature160°C With adjustable packing glandscheck Motor13/20 kW 380 volt MaterialStainless steel Information Year of construction1983 Floorspace5,0x2,0 M Total height2,4 M Weight7500 Kg Extra Specificationseasy clean due to extendable agitator. Including Pergande filter housing type PHFR 4-1500 BH TR, -1/0.5 bar with jacket 5 bar Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectione ...

General SKU305U627 LocationBarneveld CEcheck MakeStarick Fördertechnik GmbH Main Features Motor4 KW Length9520 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter219 mm Length9520 mm Between inlet and outlet7878 mm Shaft diameter133 mm Pitch185 mm InletDN200 OutletDN200 With jacketcheck (cooling) 6000mm long Max. temperature100°C With adjustable packing glandscheck Motor4kW, 400/690 Volt, 1452rpm Screw speed12/25 rpm Information TypeRFS-200/SoK Mach.No.1821.2694.01.05 Year of construction2005 Floorspace9.0x0,5 m Total height0,5 m Weight900 kg ATEX compatiblecheck Extra Specificationswith new motor and gearboxCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additive ...

General SKU339U843 MakeAPV LocationBarneveld CEcheck TypeAPV 2000 Pressure Working pressure2000 Bar Main Features Capacity11 Ltr./Hr. Motor3 KW Pressure2000 Bar Specified Features - Piston homogeniser Piston homogenisercheck Capacity11 ltr/hour Twin stagecheck Number of pistons:1 Piston diameter10 mm InletDia: 20mm Outletcheck Motor220-240/380-415 volt, 3 kW MaterialCeramic, Stainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Information No.5-07-754 Year of construction2005 Mounted on wheelsOn mobile desk With switchcheck Floorspace0,96x0,85 m Total height2,0 m Weight130 kg Extra SpecificationsWith Lista 3-drawers cabinet with tooling, 2x Premex indicators, 2x Multifix speed controllers The machine is equipped with 2 small reactors with a Premex stirring device. There are no nameplates on the reactors. Net volume per reactor is approximately  ...

General SKU244U280 LocationBarneveld Main Features Motor1.5 KW Length2340 mm Inlet diameter100 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Trough-typecheck Diameter90 mm Length2340 mm Between inlet and outlet2000 mm Shaft diameter60 mm Pitch97 mm Inletdia. 100 mm Outletdia. 125 mm Insulatedcheck Motor1,5 kW 220-240/380-415 Volt Screw speed20-100 rpm Height between in- and outlet500 mm With coverscheck Information Makeunknown: missing type plate Floorspace3,5x0,4 m Total height0,45 m Weight300 kg Extra Specificationsthis conveyor screw served as an inlet for cryogenic grinding Catalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeve ...

General SKU235U235 MakeIlchmann TypeDTSF 2x200x6.525 Mach.No.CRO 0348 Year of construction2014 Main Features Motor3 KW Length6525 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter200 mm (2x) Length6525 mm Between inlet and outlet5880 mm Shaft diameter108 mm (x) Pitch200 mm Inlet630x350 mm Outlet350x350 mm Max. temperature90 °C With adjustable packing glandscheck Motor3 kW, 220-230 volt / 380-400 volt, 1456 rpm Screw speed31 rpm With coverscheck Information LocationBarneveld Floorspace8,3x5,1 m Total height0,49 m Weight1250 kg CEcheck Extra SpecificationsCapacity: max. 5 m³/hCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubrica ...

General SKU050Y334 MakeNetzsch Mastermix Aldridge TypePMD-200 Year of construction1992 Mounted on legscheck Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1230 Ltr. Motor55 KW Specified Features - Stirring vessel Closed stirring vesselPolymer Preparation Mixer (1x) Capacity1230 Ltr Vessel sizesdia. 1130x1250mm, Flat bottom Dished top sidecheck Manholedia. 300mm Top connections(6x) Outletdia. 85mm With jacket(150 Ltr) Max. temperaturejacket 95 Degr. C, Vessel 125 Degr. C. With anchor stirrerscraper stirrer Motor17,5 KW, 380 Volt (Ex) Speed mixing shaft15 Rpm With homogeniserHigh speed disperser hydraulic driven Motorhydraulic drive unit 55,0 KW, 380 Volt (Ex) MaterialStainless steel 1.4301 (304) Information LocationBarneveld ATEX compatiblecheck Extra Specifications- High spee ...

General SKU014F047 MakeMixaco Maschinenbau Neuenrade TypeCM-2000 D No.22.856 Year of construction1993 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Motor90 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity1600 Ltr, Useful capacity 800 Ltr Vessel sizesdia. 1500x750mm (brand new OEM vessel) With cover(jacketed) Outletdia. 300mm With motor90 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace3,2x1,8 M Total height3,0 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Technical specs Extra informationbrand new oem vessel DiscountReconditionedCold mixersMixacoDiscountReconditionedPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

General SKU048W209 MakeWestfalia TypeSAK-20036 No.1643130 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor30 KW Specified Features - Separator Separator(1x) Motor30,0 KW, 380 Volt Max. rotor speed4500 Rpm MaterialStainless steel Information Floorspace1,8x1,5 M Total height1,5 M Weight2000 KGDiscountSeparatorsWestfaliaDiscountCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU205P135 LocationBarneveld MakeMorton Machine, Motherwell Scotland No.22628 Pressure Working pressure jacket1.7 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizes2950 x 950 mm InletDia.300 mm Top connections(2x)Dia.80 mm Inspection hatch600 x 460 mm en inlaat Outlet300 x 250 mm With jacketcheck With adjustable packing glandscheck Motor55 KW, 415 Volt (ex) Speed mixing shaft+/- 75 Rpm MaterialStainless steel Information Year of construction1979 Mounted on framecheck Floorspace4900 x 2500 mm Total height1600 mm Weight3300kg ATEX compatiblecheck Extra Specificationsvessel provided with 4 connections for lumpbreakersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharma ...

General SKU268K300 LocationBarneveld MakeGlatt Inox AG Process Technology TypeIST-2000 No.100117 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor75 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 l Trough sizesø 1350 x 1500mm InletDN300 Outlet300 x 220mm With jacketcheck 87+93+15 l Shaft can be heatedcheck Heating surface total 12 m² Max. temperature-20/160°C With mechanical sealcheck Motorhydr. unit 75,0 + 45,0 KW, 400/690 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Year of construction2001 Floorspace4,6 x 2,2 m Total height6,0 m Weight12.000 kg ATEX compatiblecheck Technical specs Extra informationincluding Brüdenfilter 3m2Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal ...

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader MaterialStainless steel 1.4301 (304) Single screw cont. kneaderContinuous dough preparation line (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck Information LocationBarneveld With switchgearcheck Floorspace3,0x2,4 M Total height5,6 MDiscountKneadersAML StroudDiscountKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

: gebraucht : 2016 : 9737 : prompt, Zwischenverkauf v : 9800 € : 1 : 8330 € : 2025 mm : 3 mm : 500 mm : 4 kW : 2500 mm : 1720 mm : 1200 mm : 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKUR0880 MakeApaco AG (CH) LocationBarneveld TypeAW300-2000/20-98 Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface12 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface12 m2 Tube capacity95 ltr. Max. temperature165 degr.C. Shell capacity110 ltr. Shell diameter323,9mm Shell length2700mm Wall thickness shell3,2mm Max. temperature100 degr.C. Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 (1x) Information No.503531/1 Year of construction1985 Floorspace0,7x0,7 M Total height2,8 M Weight350 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceutics ...

Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included

A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible.

Machine Overview Machine Type: Used Multi-Tasking Machine (Turn-Mill Center) Manufacturer: MAZAK Model: INTEGREX 200-III S (IG 200S III) Year of Manufacture: 2004 Control System: Mazatrol PC FUSION CNC 640MT Pro Working Area & Capacity Max. Swing / Turning Diameter: 660 mm Max. Turning Diameter over Carriage: 500 – 660 mm Max. Bar Work Capacity: 51 mm Max. Workpiece Weight: 100 kg (Chucked) / 150 kg (Shaft) Travels (X / Z / Y / W): 580 / 1045 / ±80 / 1050 mm B-Axis Swivel Range: -30° to +195° (0.0001° positioning) Spindle Specifications Main Spindle: 22 kW, 35 – 5,000 rpm, 349 Nm torque Second Spindle: 18.5 kW, 35 – 5,000 rpm, 326 Nm torque C-Axis Indexing: 0.0001° (Both spindles) Chuck Diameter: 210 mm (Main & Second spindle, Kitagawa B-208) Milling Spindle & Tooling Milling Power: 15 kW Milling Speed: 15 – 12,000 rpm Tool Magazine: 80-station (Drum typ ...

Offer 26025 Technical data: - Sanding belt dimensions approx. 200 x 1800 mm - Roll diameter 150 mm - Sanding belt speeds approx. 5 / 10 / 20 / 30 m/sec. - Speed xxxx rpm - Drive 400 V / 2.2 kW - Sanding belt fine adjustment - Sanding belt position horizontally + vertically infinitely adjustable - Working height approx. 1000 mm - Sliding support - Space requirement approx. W 800 x H 1050 / 1800 x D 1200 mm - Weight approx. 300 kg

Lippert belt conveyor GF 20000-650-500 RA1407 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 20.000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 € : 553.9 € : 2050 mm : 4 mm : 42 1/min : 750 mm : 7.5 kW : 800 mm : 450 mm : 2700 mm : 2300 mm : 1350 mm : 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 € : 1043.28 € : 200 to : 500 mm : 1000x600 mm : 640 mm : 21 mm/s : 2 mm/s : 5.5 kW : 1800 mm : 1300 mm : 2500 mm : 6400 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU244U279 MakeAllgaier-Werle GmbH LocationBarneveld TypeTSM 2000/2 Main Features MaterialMild steel/Stainless steel Surface2.5 m2 Sizes diameter1850 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface± 2,5 m² Number of sieve decks:2 Sieve sizesDia: 1850 mm With covercheck InletDia: 300 mm OutletDia: 190 mm Drive excentercheck Motor2,2 kW,220/380 Volt, 1410 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4301 (304) Information No.2450 Year of construction1982 Floor space2,4x2,1 m Total height1,65 m Weight1000 kg Extra Specifications- No sieve deck includedTumbler screening machinesFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchGeneric medic ...

: neu : ca. 4 Monate ab Auftragse : Italien : 92000 € : 1738.8 € : 200 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 2 mm/s : 2950 mm : 2500 mm : 2600 mm : 6500 kg : horizontal verschiebbar : 2050 mm : 1450 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 € : 781.19 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 82000 € : 1549.8 € : 200 to : 500 mm : 870x500 mm : 1000x600 mm : 500 mm : 300 mm : 21 mm/s : 3 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3000 mm : 8200 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1896.69 € : 200 x 32 x 32 mm : 1 kW : 2550 1/min : 42 mm : 270 mm : 470 mm : 1050 mm : 600x800x1350 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.774with machine stand, emergency stop pushbutton and brake OPTION (price on request): Footpedal as emergency stop ALTERNATIV MODELS: Art.Nr.: 317.762 table version Art.Nr.: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brake The da ...

: gebraucht : 2891C : China : 250 € : 1 : 200 mm : 63 mm : 160 mm MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

turning diameter:65 mm turning length:120 mm control:Index C200-4D SL z-axis main spindle travel:390 mm z-axis subspindle travel:390 mm x-axis subspindle travel:600 mm Travel Y1:± 80 mm Travel y2:± 80 mm x-axis rapids:45 m/min y-axis rapids:15 m/min z-axis rapid travel:45 m/min Spindle 1 RPM:5000 1/min Spindle 1 Power:35,5/27,5 kW Spindle 1 Torque:170 /125 Nm Spindle 2 RPM:5000 1/min Spindle 2 power:35,5/27,5 kW Spindle 2 torque:170/125 Nm c-axis:0,00014 ° bar material dia.:65 mm spindle nose:AD 140 spindle bore:85 mm Milling spindle 1 RPM:18000 1/min Milling spindle 1 power:11 kW Milling Spindle1 torque:19 Nm Milling spindle 2 RPM:18000 1/min Milling Spindle 2 power:11 kW Milling spindle 2 torque:19 Nm B-axes swivel angle:230 ° B-axes torque:440 Nm B-axes angle resolution:0,001 ° Milling spindle 1 & 2 tool magazine:80 HSK A40 Milling spindle 2 tool magazine static tools :6 x VDI 25 ...

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

workpiece diameter:26 mm swing diameter:- mm workpiece length:66 mm total power requirement:12 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm

max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required.

grinding length:1370 mm grinding width:560 mm workpiece height:800 mm total power requirement:50 kW dimensions of the machine ca.:9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 365 U/min milling motor:37 kW ram head dimension:240 x 240 mm max. ram stroke:1250 mm total power requirement:133 kVA weight of the machine ca.:50 t dimensions of the machine ca.:11 x 5 x 6,4 m Machine was overhauled in 2008 by OEM New control CNC SIEMENS 840 D automatic tool changer 72-pcs C-axis with driven tools Angle-, straight tool holders with CAPTO holder Coolant device Chipconveyour

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden

internal diameter:315 mm grinding depth:315 mm swing diameter:420 mm number of spindle speeds:32 - 360 U-min wheel box:-drehzahl 100 - 8000 U/min face diameter:500 mm total power requirement:12 kW weight of the machine ca.:5900 kg dimensions of the machine ca.:3400 x 1750 x 2000 mm

faceplate diameter:2000 mm swing diameter:2130 mm turning height:1400 mm ram stroke range:1000 mm workpiece weight:10 t faceplate turning speed range:1 -200 U/min main drive:60 kW total power requirement:95 kW weight of the machine ca.:24 t dimensions of the machine ca.:6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1270 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min max. workpiece weight:6.000 kg milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 (8 x 100 mm) mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

x-travel:2000 mm y-travel:1500 mm z-travel:1460 mm milling spindle motor:35/30 kW spindle taper ISO:50 spindle turning speed range:24 - 3000 U/min table surface area:1350 x 1550 mm table load:6 t feed speeds:10 - 3000 mm/min rapid speed:10 m/min total power requirement:48 kW weight of the machine ca.:24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary