generator 200 kva used for sale

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm -Weight: 8,8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 200 mm -Piston rod: Ø 35 mm -Holes: Ø 15 mm / Distance: retracted 520 mm -Dimensions: Ø 74 x 560 mm -Weight: 6.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 200 mm -Piston rod: Ø 16 mm / M12 -Holes: Ø 14 mm -Dimensions: 450/105/H100 mm -Weight: 3.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 200 mm -Type:B2-50/22x200 Pb10 TGL 10906 -Piston rod: Ø 22 mm / M18 -Holes: Ø 30 mm -Dimensions: 465/75/H90 mm -Weight: 6.6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 200 mm -Groove width: 10 mm, dimensions see photo technical drawing -Dimensions: 200/55/H32 mm -Weight: 1.9 kg

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc -Manufacturer: 3M Scotch-Brite, coarse cleaning disc type CG-DC Ovp 2 pieces -Art.No.: 61163 -Diameter: Ø 200 x 13 mm -Shipping/Price: complete -Transport dimensions: 205/3205/H35 mm -Weight: 0.3 kg

electric motor, three-phase motor -Manufacturer: Euromotori, electric motor type ASA 200LB-2 -Power: 37 kW -Speed: 2960 rpm -Shaft: Ø 55 x 110 mm -Design: B3 Protection class: Ex -Dimensions: 825/396/H570 mm -Weight: 335 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Rota, solid rubber tires 2 pieces -Tire size: 200/50-10 RIM 6.50F-10 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 440 x 200 mm -Weight: 34.3 kg/piece

Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Xycom, Operator Panel from OMSO CD Printing Machine -Type: 2005 -Dimensions: 420/280/H315 mm -Weight: 6.9 kg

Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg

Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders -Manufacturer: SMC, pneumatic cylinder double version each open on one side -Type: C95SDB 80-200 -Piston rod: Ø 25 mm -Stroke: 200 mm each -Pressure: max. 10 bar -Dimensions: 653/195/H130 mm -Total weight: 13.9 kg

Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 2 t -Rope groove: Ø 10 to 14 mm -Dimensions: 450/180/90 mm -Own weight: 8.5 kg

Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm -Weight: 10.5 kg/piece

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

PLC controller, central assembly, RAM, CPU, central processing unit, central device Manufacturer: Siemens, Simatic central assembly -Type: ET 200SP F-CPU 6ES7512-1SK01-0AB0 -Dimensions: 100/80/H120 mm -Weight: 0.4 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Steel -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 665/200/H250 mm -Weight: 117 kg/unit

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

PLC control, digital output, PLC expansion module -Manufacturer: Siemens, Simatic ET 200eco PN Digital Output Module -Type: 6ES7 142-6BR00-0AB0 6ES7142-6BR00-0AB0 -Number: 7 modules available - Price: per piece -Dimensions: 175/60/H50 mm -Weight: 0.9 kg/pc

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: Shen Zhen, axial fan type FP-20060EX S1-B -Voltage: 220-240 V / 65 W -Number: 5 fans available -Price: per piece -Dimensions: 200/200/H60 mm -Weight: 1.4 kg

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

Key data: 65 mm, 510 mm

12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 300 x 200 mm -Quantity: 1x flat angle available -Dimensions: 300/200/H5 mm -Weight: 0.7 kg

PLC controller, connection module for digital electronic modules, terminal module, bus adapter -Manufacturer: Siemens, Bus adapter Simatic ET 200SP -Type: 6ES7193-6AR00-0AA0 6ES7 193-6AR00-0AA0 -Number: 4 modules available -Price: per piece -Dimensions: 70/60/H20 mm -Weight: 0.1 kg/pc.

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

Key data: 490 mm, 1250 , 990

Machine type: EVP-RA 200 Manufacturer: ERBA Power kW: 1.5 Total volume: 230 lt. The EVP-RA 200 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 200 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

Display, display module, display panel, text display -Manufacturer: Siemens, Text display Simatic S7 TD 200 -Type: 6ES7272-0AA00-0YA0 6ES7 272-0AA00-0YA0 -Dimensions: 150/70/H30 mm -Weight: 0.3 kg

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 200 mm -Piston rod: Ø 20 mm -Mounting: Bolt circle Ø 85 x 8 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 440/104/H123 mm -Weight: 8.5 kg/pc.

Key data: 415 mm, 1290 , 980

Machine type: EVK 200 Manufacturer: ERBA Heating element kW: 1.5 Total volume: 200 lt. Description: With the ERBA Granulate Dryer EVK 200, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 200 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Key data: 1660 mm, 510 mm, 510 mm

Fully functional Used CNC Machining Center MAZAK VTC-200 C Year of manufacture 2001 The machine has a Fusion 640M control system and is equipped with a chip conveyor, partition for pendulum machining and much more. Location of the machine: 97070 Würzburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg

Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg

SARCMI BLUESTAR 2000 Complete PET filling line: Blow Molding Machine - SBO-14 ROUE - 18.200 bph Air Compressor - CE68BSG40 - 38,9 m3/m Air Conveyor Monoblock Filler BLUESTAR 2000 - 1R 54 72/9H - 0,5 l. -20000 bph, 1,5 l. -15000 bph Cap Elevator Labeling Machine ROLLQUATRO F30 - 24000 labels/hour Fill Level Control Device - STRATEC Shrink Wrapping Machine - АРЕТ 143/DF - 20000 labels/hour Bottle and Packaging Conveyor Pallet Stacker - PALKOMBI Series IBP429 - 30 pallets/hour Pallet Wrapper - ROTOPLAT 2000 - 30 pallets/hour All machinery in good condition, complete working line.

Müro A3/2000 WT block size press; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insertion height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.