gear used for sale

Gear motor, electric motor, electric gear motor -Speed: 4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 40 x 110 mm -Protection class: IP 54 -Dimensions: 600/280/H270 mm -Weight: 48 kg

Gear Pump, Transfer Pump with Motor and Filter WMW, ORSTA A20-25-63 VS Pump: AC 1,6 TGL 17-747407 Qmax: 1.6 l/min pmax: 6.3 bar engine: Type 1260.1/1 0.06 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 460 x 250 x 170 mm

Due to new motorization, this Reintjes gearbox type WAF 763L with subzetsung 5.750: 1 half May 2026 is available The shooting hours is dan Umnabei 64.000

Gear motor, electric motor, electric gear motor -Speed: 17 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 410/230/H190 mm -Weight: 21.6 kg

Resolver with measuring gear, rotary detector VEM 1969.1 mikroma TS3C2 i = 1 : 5 shaft: Ø 10 mm flange: Ø 56 / 70 mm used, tested ! Dimensions: 160 x 130 x 110 mm

max. wheel diameter: 500 mm gear width: 200-400 mm module: 12 turning speeds: 0-3250 U/min bracke pressure: bis max. 95 Nm inner taper: Konus #39 Control: Fanuc 16 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Transfer in current condition as seen -Foot is broken on one side -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg

Gear motor, electric motor, electric gear motor -Speed: 26.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 385/210/H215 mm -Weight: 18.3 kg

Geared motor, electric motor, electric geared motor -Speed: 216 rpm -Power: 0.33 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 33 -Dimensions: 385/220/H200 mm -Weight: 20.5 kg

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm hole spacing: 60 / 51.5 mm 4x threaded hole: M8 x 1.25, depth: 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

max. wheel diameter: 1250 mm gear width: 600 mm max. module: 16 min. module: 2 tooth width: 490 mm Zahnschrägungswinkel max.: 45 ° shifting: 200 mm max. number of teeth: 12 diameter of hob: 240 mm cutter length max.: 280 mm table diameter: 1020 mm milling spindle speeds (infinitely variable): 28 - 200 U/min power capacity: 25 kW weight of the machine ca.: 16,2 t dimensions of the machine ca.: 4,5 x 4,6 x 2,7 m equipped with: - universal hob head - change gears machine has been partly overhauled (electrical and machnical) and is now with programmable, digital Infeed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Connection: 400/230 volts -Power: 0.45 kW -Rotation speed -Construction: B5 angle -Diameter shaft: Ø 10 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 190/160/H100 mm -Weight: 2.5 kg

Gear motor, electric motor, electric gear motor -Speed: 6 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 675/260/H245 mm -Weight: 47 kg

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

max. wheel diameter: 2500 mm gear width: 750 mm max. module: 18 / 22 min. module: table diameter: 1800 mm min. number of teeth: 12 table hole: 300 mm hob turning speeds: 20 - 100 U/min table load: 10 t milling cutter dia. x width: 250 x 340 mm shifting: 150 mm feeds - tangential: 0,25 - 3 mm/min feeds - radial: 0,07 - 1,5 mm/min feeds - longitudinal: 0,55 - 3,5 mm/min milling feeds: 13,4 - 80 (Einzelteilen) mm/min total power requirement: ca. 30 kW weight of the machine ca.: 28 t - change gears, arbors, toolings, clamping plots - universal hob head - swiveling outer steady - single indexing device party overhauled in 2023 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Geared motor, electric motor, three-phase motor -Speed: 87/106 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 6x motors available -Price: per piece -Dimensions: 370/188/H155 mm -Weight: 9.5 kg

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

Gear motor, electric motor -Speed: 453 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Dimensions: 500/250/H230 mm -Weight: 33 kg

Gear motor, electric motor -Speed: 32/65 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 5x available -Dimensions: 560/250/H220 mm -Weight: 32 kg

Gear motor, electric motor, electric gear motor -Speed: 56 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33 -Weight: 24 kg

Gear motor, electric motor -Speed: 29.5 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Brake: 380 V -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 460/200/200 mm -Weight: 22 kg

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

Gear motor, electric motor -Speed: 127/254 rpm -Power: 0.55/0.9 kW -Construction: B3 -1x shaft diameter: Ø 25 mm -3x shaft diameter: Ø 24 mm -Protection class: IP 54 -Number: 4x engines available -Price: per piece -Dimensions: 560/270/H240 mm -Weight: 43 kg

Gear motor, electric motor -Speed: 19 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Height shaft axis: 200 mm -Dimensions: 530/250/H295 mm -Weight: 56 kg

MODUL ZFWZ 3150/3 Gear hobbing machine max. wheel dia. 3150 mm min. wheel dia. 500 mm max. wheel diameter with outboard-support 1600 mm max. module 30 mm gear width 1000 mm max. helical angle 45 deg tangential adjustment 500 mm cutter length max. 440 mm diameter of cutter (hob) 350 mm table diameter 2400 mm table bore diameter 500 mm depth of hole 1100 m table load max. 30 t Accessories Dimnsions 6700x5400x4800 mm Weight 65000 kg

Gear motor, electric motor -Speed: 56 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 500/240/H295 mm -Weight: 50 kg

Gear motor, electric motor, electric gear motor -Speed: 315 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

Gear motor, electric motor, electric gear motor -Speed: 18/2 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 30 mm -Protection class: IP 44 -Brake: 24 V -Quantity: 1x available -Dimensions: 660/260/H230 mm -Weight: 40 kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H285 mm -Weight: 49 kg

Max. cone distance: 230 mm Number of teeth: 5-150 Diameter of taper hole at large end: 100 mm Taper: 1:19,7 Depth of taper: 150 mm Diameter of hole through spindle: 78 mm Diameter of spindle nose: 140 mm Max. offset above center: 114 mm Max. offset below center: 114 mm Max. distance from machine center to nose of spindle: 343 mm Min. distance from machine center to nose of spindle: 63 mm Cutter speeds: 17-115 rpm Feed (sec/tooth): 9-80 sec Floor space: 1900x2900 mm Net weight: 10750 kg

Gear motor, electric motor, three-phase motor -Speed: 0.16 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 640/250/H240 mm -Weight: 42 kg

A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible.

Gear motor, electric motor -Speed: 0.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 675/260/H290 mm -Weight: 59 kg

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.6 kW -Voltage: 500 VOLT Y -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 available -Dimensions: 490/250/H290 mm -Weight: 39 kg

max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

SEW Eurodrive Type SA67 DT90L-4 ZFISITI 3 chamfer 400 volts 1.5 kW 26 RPM Shaft 40 mm L 52.00cm W 25.00cm H 25.00cm

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 530/250/H220 mm -Weight: 31 kg

Gear motor, electric motor -Speed: 100 rpm -Power: 3 kW -Design: B5 -Diameter shaft: Ø 48 mm -Protection rating: IP 44 -Quantity: 1 piece available -Dimensions: 700/250/H320 mm -Weight: 57 kg

Gear motor, electric motor -Speed: 50 rpm -Power: 2.2 kW -Design: B5 -Diameter shaft: 40 mm -Flange diameter: 250 mm -Diameter recess: 180 mm -Protection class: -No nameplate -Quantity: 1x motors available -Dimensions: 700/280/H300 mm -Weight: 63kg