3361 offers

maximum number of results exceeded > 1000
please refine your search

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -year of manufacture: 2009 TECHNICAL PARAMETERS: -planing width 200 mm -planing height 120 mm 1 head lower 5.5 kW 2 head of law 4 kW 3 head left 4 kW 4 top head 5.5 kW -spindle diameter 40 mm -feed motor 3 kW -adjustable feed speed on the geared motor -electrical height adjustment -height adjustment engine 1.1 kW -two rolls of the countertop stretching -six of the upper roller steel -one roll of rubber upper -cardan shafts feed -chrome-plated tops -central lubrication -feeding table length 2130 mm -nozzle diameter 130 mm Overall dimensions of the machine: -length of 380 cm – widt ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Cold mixer containermixer, Make Mixaco Maschinenbau GmbH (DE), Type LAB CM 6-MB, No 080139, New 2008, Material stainless steel, Capacity 6 Ltr (nett), Vessel sizes dia.260x160mm, With cover (jacketed ), Manual operated outlet dia. 75mm, Max. temperature 90 Degr .C., With motor 5,5 KW, 400 Volt, Mounted on frame, With switchgear, Floorspace 1.1x0.8 M, Total height 1,9 M, Weight 350 KGCOLD MIXERSPLASTIC MACHINERY > COLD MIXERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more mach ...

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -year of manufacture 2004 TECHNICAL PARAMETERS: -working width 230 mm -working height 120 mm -spindle lower 5.5 kW -right spindle 4 kW -spindle left 5.5 kW – the spindle top 5.5 kW -two types of feed rate -four top steel roller gears -one upper rubber roller -air pressure -electrical height adjustment -the length of the table initial 2200 mm -feed motor 1 kW -height adjustment engine 0.37 kW Overall dimensions of the machine: -length: 350 cm -width: 160 cm -height 180 cm -weight 1600 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Colloid mill in line, Make FRYMA KORUMA, Type MZ 100/R, No F186 1063, New 1981, House material stainless steel, Rotor material stainless steel, Rotor sizes dia.90mm, Inlet dia. 37mm, Outlet dia.37mm, Motor 5.5 KW, 380 Volt, Speed 2940 Rpm, Mounted on wheels, With switchgear, Floorspace 0.7X0.7 M, Total height 2.1 M, Weight 140 KGCOLLOID MILLSGRINDERS > COLLOID MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition TECHNICAL PARAMETERS: -Max planing width: 200 mm -Max planing height: 130 mm -Number of spindles: 4 -The order of spindles: down, right, left, up -Each on a separate spindle motor -Shafts extending gear -Suction diameter: 2 × 120 mm, 1 × 125 mm, 1 × 140 mm Return on kardanach -Pump lubrication table -Raising the body electric -Power supply: 400V Overall dimensions of the machine: -length of 315 cm -width: 135 cm -height 155 cm -weight 1500 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Three roll mill, Make Exakt Apparatebau Norderstedt, Type 80-S, No 1672, Material stainless steel, Roll diameter 80mm, Roll width 200mm, Rolls placed horizontal, Motor ± 1,1 KW, 230 Volt (1 Ph), With variable speed drive 35-630 Rpm, Manual roll adjustment, Rolls can be cooled, With switchgear, Floorspace 0,7x0,4 M, Total height 0,4 M, Weight 60 KGTHREE ROLL MILLSGRINDERS > THREE ROLL MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -year of production 1999 -ideal for the production of Windows TECHNICAL PARAMETERS: -planing width 230 mm -planing height 150 mm -pneumatic head jump right and top 50 mm -spindle lower 5.5 kW -left and right spindles 7.5 kW – the spindle top 5.5 kW -bottom spindle 4 kW -power undercutting 2.2 kW -unit with pneumatic doskokiem -spindle diameter 40 mm -spindle RPM 6000 -adjustable feed smoothly 3-32 m/min -feed motor 2.2 -four upper pinch rolls gear -the upper three rubber rollers pinch -Additional rolls for the strip shaft -rubber draw roller in the counter -electric control head top  ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Conical granulating sieve, Make Quadro Engineering Corp., Type 194S Quadro Comil, No 194-0656-1, New 1995, Material stainless steel (1.4301), Rotor sizes dia.200mm, With hopper, Outlet dia.250mm, Motor 4,0 KW, 230/400 Volt (ATEX II 1D 135gr.C), With variable speed drive, Speed 0-2800 rpm, Mounted on stainl. st. frame, Mounted on wheels, With switchgear, Floor space 1.6x1.0 M, Total height 2.0 M, Weight 400 KGSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH ...

Category: 112: gear cutting and hobbing machines
New in: 2007
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

General overhaul in 2007. Bumper height: 160 mm Table diameter: 320 mm Vertical table movement: 270 mm Cross table movement: 320 mm Longitudinal movement of table: 200 mm Distance between cutter and stand: 265 mm Maximum distance between knives and clamping table: 280 mm Number of double strokes per minute: 71-112-180 Max power: 350 kg Feeds: longitudinally and transversely in the range: 0-0.6 mm Electromotive drive: 1400 rpm, 1.5 kW Machine dimensions: 930 x 1200 mm Machine weight with standard accessories: 1050 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Conical granulating sieve, Make Quadro Engineering Corp, Type Quadro Comil 196 Ultra, No 196-1317, New 2006, Material stainless steel (1.4301), Rotor sizes, With hopper, Outlet dia.350mm, Motor 7,5 KW, 400/680 Volt, With variable speed drive, Speed 0-1800rpm, Mounted on stainl. st. frame, Mounted on wheels, With switchgear, Floor space 1.5X0.9 M, Total height 1.7 M, Weight 400 KGSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machine ...

Category: 112: gear cutting and hobbing machines
New in: 1981
Price: request quote
Location: Land-sk SK 81101 Bratislava, Spitalska 53
Seller: ALM Trade Sro

Manufacturer: WMW HECKERT, Karl-Marks-Stadt Type/Model: ZFWVG 250 x 800 New in: 1982 Technical data: 1.Workpiece diameter over bed 500mm 2.Milling length 800 mm 3.Max. module 7mm 5.Work-piece diameter over saddle 250mm 6.Center height over bed 260 mm 7.Work-piece spindle bore 102 mm 8.Number of teeth 2-50 9.Range of spindle rotation: 0,0032-2,6 Rpm 10.Range milling Feed: 0,25-198 mm/min 11.Power Main drive motor 4 kW 12.Total weight 3300 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Pump peristaltic pump, Make DEPA ELRO, Type IP 400, Material (alu housing), With motor 5.5KW, 220/380Volt, With variable speed drive, Inlet dia.50mm, Outlet dia.50mm, Mounted on frame, Mounted on wheels, With switchgear, Floorspace 1.8x0.8 M, Total height 0.9 M, Weight 450 KGPUMPSPUMPS > PUMPS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 702: breadmaking and confectionery machines
New in: used
Price: 4.250 €
Location: Land-hr HR 52420 BUZET, Strped 59
Seller: DELICIA d.o.o.

ROBUST AMERICAN PLANETARY MIXER IN PERFECT WORKING CONDITION, USED BUT WELL MAINTAINED. VERY REAR MODEL, BUILT TO LAST FOR DECADES. NEW TRANSMISSION GEAR WHEELS. 3 SPEEDS, 2 STAINLESS STEEL 100 LITERS BOWLS, 2 STRONG 8mm WIRE WHIPS, 2 BEATERS, BOWL TROLLEY, STAINLESS STEEL PROTECTION. 3 PHASES (380V), 2,2 kW. WE SELL BECAUSE BOUGHT A NEW ONE. READY FOR USE. POSSIBLE TESTING ON SITE. POSSIBLE DELIVERY WORLDWIDE UPON REQUEST. SHIPMENT AND PACKAGING COSTS ARE NOT INCLUDED. PLACE OF DELIVERY: BUZET, ISTRIAN COUNTY, CROATIA, 40 KM FROM TRIESTE, ITALY.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Drying oven, Make Will & Hahnenstein GMBH, Type E-TEB, No 2842, New 1998, Material mild steel, Max. temperature 150 Degr.C., Number of compartments: 1, Internal width 1.4 M, Internal depth 1.3 M, Internal height 1.6 M, Electric heating, Electric capacity 12.55 KW, Number of doors: 1, With air circulation, With fan, Motor 0.55 KW 400/230 Volt, With switchgear, Floorspace 1.7x1.8 M, Total height 2.4 M, Weight 780 KGDRYING OVENSDRYERS > DRYING OVENS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot  ...

Category: 106: presses
New in: 2006
Price: request quote
Location: Land-de DE Thüringen
Seller: Wimmer- Umformtechnik GmbH

Eccentric press PE 160 with servo roll feed servo 400 and reel - straightening machine nominal preÃ? force 1,600 kN Piston stroke, in steps adjustable 20-160 mm Tappet adjustment 100 mm Throat depth 400 mm Speed 50 rpm idle Option: adjustable 30...85/min Mould installation height at GröÃ?thub down and adjustment up 460 mm (applies from top machine table bottom plunger) Table clamping area (Wxd) 1.300 x 780 mm Plunger clamping area (Wxd) 900 x 600 mm Pin hole in the tappet 65 mm Power of main motor 15 kW Height approx. 3,600 mm the machine Weight of machine 14,000 kg - continuous Hubzahlregeleung, fully automatic stroke adjustment, motorized RAM adjustment, hydr.  ...

Category: 112: gear cutting and hobbing machines
New in: 1978
Price: request quote
Location: Lager Langenfeld
Seller: ADEM Maschinen GmbH

max. wheel diameter: 900 mm gear width: 380 mm max. module: 10/12 min. module: 1 total power requirement: 17 kW weight of the machine ca.: 8,0 t dimensions of the machine ca.: - m

Category: 102: lathes
New in: used
Price: request quote
Location: Land-ch CH 6260 Reiden, Bodenachermatte 1
Seller: Catalano Werkzeugmaschinen AG

-Accessories available -Geometric overhauled -Machine bed ground -Bed slide, cross slide, upper carriage, tailstock, scraped, etc. -incl. test report DIN 8605 Tip height 160 mm Turning length between top 650 mm Swing over bed 320 mm Swing over bed slide 300 mm Swing over cross slide 198 mm Swing over cross slide with T-slots 175 mm Faceplate diameter 250 mm Chuck diameter 165 mm The Centre of rotation of floor 1150 mm Swivel range of the upper slide through 180 ° Cutting edge height 30 mm Maximum size removable holder 20 mm Drive motor performance 2.6/3,1 kW Spindle speeds With pin-selectable engine 48-2500 RPM Number of stages 16 Feed number 24 Longitudinal with int ...

Category: 112: gear cutting and hobbing machines
New in: 1997
Price: request quote
Location: Lager Langenfeld
Seller: ADEM Maschinen GmbH

max. wheel diameter: 500 / 600 mm gear width: - mm max. module: 8 min. module: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m

Category: 1108: spare parts
New in: 1998
Price: request quote
Location: Land-tr TR 34953 ISTANBUL, TACIR SOK. NO:19-20 AYDINLI TUZLA
Seller: DEPA MARINE

1 PC SKL 6VDS 48/42AL-2 STANDARD SIZE CRANKSHAFT AVAILABLE FROM STOCKS TOGETHER WITH COUNTER WEIGHTS & GEARS. BUILT YEAR . 1998

Category: 205: boring mills, machining centers
New in: 2009
Price: used machinery auction RESALE 18.500 €
Location: Land-de DE Germany, 46535 Dinslaken
Seller: Surplex GmbH

serial number: 300.01.002.09 Weight approx.: 1 kg Dimensions (l x w x h) approx.: 1 x 1 x 1 mm c-axis: ja / yes working length x-axis: 3060 mm working width y-axis: 1210 / 1260 mm main spindle: 9 kW tool changer: 18 fach / 18 fold vacuum pump: 100 cbm/h drilling head vertical x-axis: 10 piece drilling head vertical y-axis: 5 piece drilling head horizontal x-axis: 2 + 2 piece drilling head horizontal y-axis: 1 + 1 piece saw unit: ja / yes (schwenbar/traversable) travelling way X-axis: 3550 mm travelling way Y-axis: 1680 mm travelling way Z-axis: 275 mm path-feed rate max. X-axis: 80 m/min path-feed rate max. Y-axis: 80 m/min path-feed rate max. Z-axis: 20 m/min total power approx: 20 KW Descr ...

Category: 101: boring mills and machining centers
New in: used
Price: 1.950 €
Location: Land-de DE 59846 Sundern, Bruchhausen 21
Seller: Czech Industrie Service

Chuck: MK 5 Gr. Bohrlstg. in St.: approx. 50 mm Quill stroke: approx. 240 mm Throat depth: 385 mm Speed range: 40-800 RPM Feed: automatically in 5 select areas Table size: 620 mm diameter. Säulendurchm.: 220 mm Total power consumption: approx. 5 KW / 380 V Machine weight: 1400 kg Machine height: 2200 mm Equipment / Accessories: infinitely adjustable speed range 5 automatic drill feeds Swivel rotary table processed baseplate Coolant system All functions are given; only the gear runs loud. All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Every interested party may advance to visit the machine and t ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear

Category: 107: sheet metal working
New in: 1988
Price: request quote
Location: Land-sk SK 91943 CIFER, Trnavska 15
Seller: FORMEX SK s.r.o.

Coil weight - maximum 1000 kg Coil diameter 1200 mm Clamping range - 320-520 mm Band width - 300 mm Band thickness 0.1 4 mm Beruhrungslose volume control Reel axis hohenverstelbarr 3-mounted reel shaft Central voltage via bevel gear drive power - 0,55 kW Weight 260 kg

Category: 206: presses
New in: 1993
Price: 1.900 €
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Verleimpresse \r\nFabrikat: Polzer \r\nTyp: HHVT_F 30/21\r\nBaujahr: 1993\r\n\r\nPressbereich\r\nHöhe: ca. 2100 mm\r\nBreite: ca. 2840 mm\r\n\r\nAußenabmessungen:\r\nHöhe mit Auflagearmen: ca. 2700 mm\r\nHöhe Rahmen (für Transport): ca. 2.000 mm\r\nLänge: ca. 3.050 mm\r\nTiefe: ca. 820 mm\r\n \r\n6 Auflagearme\r\nüber Kettenzug höhenverstellbar\r\nSpannung von Hand \r\n\r\nGestell auf Rollen verfahrbar

Category: 107: sheet metal working
New in: used
Price: 1.500 €
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

Technical data: -Manufacturer. Binmak -Type: IKM 1.2 Country of origin Turkey -with foot pedal -Electric Geared motor 0, 75kw Power Weight approx. 300 kg Plates up to 1, 2mm Rack approximately 250mm / 140mm -with roller set

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Paddle dryer (1x) make List AG Pratteln, Type Discotherm, No 2549.01.01.01.01.2549, New 1990, Material stainless steel (1.4435), Capacity 2,7 Ltr, Trough sizes dia. 140x190mm, Working pressure vac/6 bar, Test pressure 7,8 bar, With jacket (0,4 Ltr), Working pressure 4 bar, Test pressure 5,2 bar, Max. temperature 250 Degr. C., With mechanical seal, Motor 1,1 KW, 220/380 Volt, With switchgear, Floorspace 0,7x0,6 M, Total height 0,7 MPADDLE DRYERSDRYERS > PADDLE DRYERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit ou ...

Category: 107: sheet metal working
New in: 2016
Price: request quote
Location: Land-de DE Hockenheim
Seller: VVB-Concept UG

CNC hydraulic press brake ULTIMA UAD 400 t x 6100 mm year 2016 Linear CNC measurement for the deep Y1-Y2 ESA 550, 2D graphical CNC control, X-R back gauge on heavily built CNC controlled hydraulic crowning 1 set of upper tools Rolleri P. 97-85-t.s.c.i.ACEs.R08 1 set of sub-tools or assistants Rolleri M460-R 2 Auflegearme on linear Guide CE with LazerSafe dual beam Touch screen Panel 2D: ESA-550 2-D type PC including workstation software motor-driven adjustment Z1-Z2 buttons. 2 CNC bending AIDS including parking difficult integrated Backgauge X-R back gauge 1500 mm 1 Chuck up to 160 t pressure adsorption/m above 1 tool holder up to 160 t pressure adsorption/m below 1 Manual fast cl ...

Category: 101: boring mills and machining centers
New in: 2013
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

x travel: mm y travel: mm z travel: mm --------------------------------------------------: WORKING RANGE -CUBIC-: - X-axis travel: 4000 mm - Y-axis travel: 1000 mm - Z-axis travel: 1400 mm TABLE: - table surface (front-back): 4200 mm - clamping surface diameter: 1100 mm MILLING SPINDLE / HEAD: - spindle type: tilting head: - spindle revolutions (max): 6000 /min - number of gears: 3 - tool fixture: ISO SK 50: TOOL MAGAZINE: - number of positions: 24 DIMENSIONS / WEIGHTS: - space requirements -left/right-: 10000 mm - space requirements -front/back-: 4750 mm - total height: 3550 mm - total weight approx.: 28000 kg ATTACHMENTS: - chip conveyor: yes: - through spi ...

Category: 1405: cranes
New in: 2000
Price: request quote
Location: Land-de DE 14656 Brieselang, Deutschland
Seller: Mieth Maschinenhandel

Technical data: -Capacity 6300 kg -Track width approx. 11250 mm -Operation via hand remote switch -Hacking way approx. 6000 mm -Reeving 4 / 1 -Height approx. 750 mm -Wheelbase approx. 2000 mm -Driving beam length approx. 2500 mm -Track bar 50 mm - speed -Trolley gear approx. 20 m / min + 5 m / min -Hoist around 4 m / min + 0,6 m / min -Crane chassis approx. 40 m / min + 10 m / min -Crane weight - approx. 4000 kg

Category: 109: other metal working machines
New in: 1967
Price: request quote
Location: Willich
Seller: Teutenberg Maschinen GmbH & Co.KG

wire dia.: je nach Festigkeit mm pulling capacity: 6 t total power requirement: ca. 55 kW weight of the machine ca.: t dimensions of the machine ca.: m Vertical Bullblock constr.: Breitenbach tpye: GES 6 drawing force: 6 to. drawing die-Ø 800 mm drawing speed: infinitely varialble up to 150 m/min 3- steps gear box driving motor: 380V, 50Hz, 33/50kW, 985/1480 rpm with frequency converter constr. Lenze and Siemens Simatic S7-200 control more pictures on request

Category: 503: shredders
New in: used
Price: request quote
Location: Land-de DE
Seller: Perry Machinery Poland

Stock# UP5988 Second hand twin shaft shredder by Pallmann (Germany) type PSD 300. Milling chamber has internal dimensions 550 mm x 850 mm. Two shafts are driven by el motor 37 kW and gearbox. Machine is mounted on carbon steel supports.

Category: 112: gear cutting and hobbing machines
New in: 1991
Price: request quote
Location: ab Lager Monheim am Rhein
Seller: Kemmerich Werkzeugmaschinen GmbH

max. workpiece diameter: 500 mm threading length: 3150 mm max. module: 3-7 / 10-15 thread pitch: 1 - 800 mm spindle bore: 102 mm diameter of hob: 150 mm support swivability - left/rigth: 120 / 90 ° hob turning speeds: 45 - 560 U/min speed of workpiece (milling): 0,0034 - 2,65 U/min feeds - longitudinal: 0,256 - 195 mm/min feeds - rolls: 0,0256 - 5,17 mm/WU electrics - voltage/frequency: 380 / 50 V/Hz center height over bed: 260 mm workpiece diameter: über Frässchlitten 250 mm milling spindle drive: 5 kW total power requirement: 16 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 5,5 x 1,5 x 1,5 m Long-Thread + Spline-Shaft-Milling/Hobbing Machine - thread milling head A ...

Category: 1200: machines and plants for process engineering
New in: 1995
Price: request quote
Location: Land-pl PL 05-85 Ozarow Mazowiecki, Wolnosci 1a
Seller: Perry Machinery Poland

Stock# U2301-1 Second hand stainless steel contact parts twin shaft planetary dissolver by Molteni type TM5 RP.SV. Mixer has stainless steel jacketed mixing pan with internal diameter 207 mm x depth 213 mm. Total volume of pan is 7 l, working volume about 5 l. Mixing pan has side wall bottom discharge outlet. Mixer has two agitators with toothed discs and one wall scrapper. Toothed discs have diameter 100 mm and are driven by vari speed gearbox and two speed el. motor 1.75/1.4 kW, 2800/1400 rpm, 380 V, 50 hz, in EEx-d II B T4. Working rotation of disc agitators manually adjustable in range from 300 up to 4800 rpm. Wall scrapper is driven by el motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz (desi ...

Category: 109: other metal working machines
New in: 2009
Price: request quote
Location: Schweiz
Seller: Knops Werkzeugmaschinen

pulling force - max.: 20 kN max. ram stroke: 250 (400) mm max. workpiece diameter: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m NC broaching machine simplifies the clearing of keyways and internal gears in through holes and blind holes Condition: Little used, very well preserved. With accessories in the new value of about 20000 CHF Cutting knife including steel guides guide bushings chuck Technical specifications Programming interactive touch screen language English, German, French, Dutch in metric and customs system Equipment cross table / part table / light curtain stroke 400mm hand adjustment 250mm automatic clearing cycle Keyway w ...

Category: 103: milling machines
New in: 1974
Price: request quote
Location: Land-it IT 10093 COLLEGNO (TO), VIA EDMONDO DE AMICIS, 146
Seller: B.M. MACCHINE UTENSILI srl

TYPE Displayed TABLE SIZE 1200 x 300 mm. TRANSVERSAL STROKE 300 mm. AXIS X 850 mm. VERTICAL STROKE 500 mm. TYPE Gear Head ISO 50 CONE 28-1600 rpm SPINDLE SPEED. SPINDLE MOTOR POWER 5 Hp. 2120 Kg WEIGHT. YEAR BUILT 1974

Category: 109: other metal working machines
New in: 2016
Price: request quote
Location: Lager
Seller: Emuk Werkzeugmaschinen GmbH

rolling capacity max.: 60 t workpiece diameter: 80 mm workpiece length: 520 mm Control: Siemens 840D gear hobbing width -max.: 700 mm max. module: 2,25 total power requirement: 35 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3,9 x 1,9 x 3,1 m

Category: 1103: turbines
New in: 1999
Price: request quote
Location: Land-de DE 51465 Bergisch-Gladbach, Kürtener Strasse 13
Seller: Kandlin Stromerzeuger-Ankauf GmbH

Price on request. FCA free loaded in our warehouse germany. One second hand KKK Siemens Twin 46 condensing steam turbine manufactured in 1999 with only 35.000 working hours in canopy for sale. Include is generator switchgear 10 KV with the control panel and a Serck-Como vacuum- condenser from 2006 (20 to/h). Additional we can offer many many spare parts like spare rotors and controllers. Scope of supply: control panel / generator switchgear 10 KV vacuum condenser / condenser pumps / canopy turbine: KKK Siemens type: Twin 46 el. power: 3.600 KW running hours: 35.000 steam inlet pressure: 35 bar / 2,5 bar out inlet steam temperature:410°C manufa ...

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Malsch
Seller: Emuk Werkzeugmaschinen GmbH

max. wheel diameter: 500 mm gear width: 75 mm max. module: 5 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 3,6 t Change gears, good condition.

Category: 307: rubber machines
New in: 2012
Price: request quote
Location: Land-uk UK
Seller: Andrew Isaacs Machinery International Ltd

Decapo Builder / Extruder Year 2012 New intake roller drive Pin type 100mm LD 12:1 Suitable for OTR 26.5 R25 AC motor Gearbox Suitable to build tyres for smooth and groove Manual expandable hub but you could also apply a pneumatic one

Category: 103: milling machines
New in: 1968
Price: request quote
Location: Malsch
Seller: Emuk Werkzeugmaschinen GmbH

max. wheel diameter: 215 mm gear width: 30 mm max. module: 4 min. module: 0,5 weight of the machine ca.: 3,5 t GLEASON 7A Hypoid Bevel Gear Generator, 8.5 diameter, 4 DP, 1.25 face, 0.500 full depth, hydraulic chucking attachment. Maschine is coming with 3 cutter heads , and the tooling cabinet with chan egears !

Category: 307: rubber machines
New in: 1987
Price: request quote
Location: Land-uk UK
Seller: Andrew Isaacs Machinery International Ltd

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

Category: 209: other wood working machines
New in: 2004
Price: request quote
Location: Land-de DE Germany, 14542 Werder - Glindow
Seller: Surplex GmbH

Weight approx.: 4130 kg Dimensions (l x w x h) approx.: 2000 x 2300 x 2000 mm Article Number of Manufacturer: 260920304 Description: AHWI FM 700, 2300 Forest mulcher/ mulcher Power range 250 - 350 PS, Working width 2300 mm, Hydr. pressure device with rake, W-gearbox control, Cardan shaft, approx. 3000h, Condition generally good, but partly in need of repair: Replacement of rotor bearings, partial reconditioning of inner wall, rotor balancing, tools have approx. 50 %

Category: 109: other metal working machines
New in: 2015
Price: 257.600 €
Location: Land-pl PL Czluchów
Seller: NETBID Polska Sp. z o.o.

Production line for applying external insulation RK-M Product Data: Cable type: Coax Cores Diameter over insulation: 3 - 20 mm Insulation material: LSOH, PVC ,PE Line Data Line geared for: max. 300 m/min. at barrel diameter: 400 mm Cable passage over floor: 1000 mm Reel data Pay-off stand: AUF 5.16 Flange diameter: 800 1600 mm Width over hubs: 500 - 1500 mm Max. reel weight: 5.000 kg Longitudinal tape pay-off: RBA 1041 Outer diameter: max. 800 mm Tape width: max. 152 mm (6”) Inner diameter: 380 - 430 mm Weight: max. 200 kg Take-up stand: AUF 5.16 Flange diameter: 800 1600 mm Width over hubs: 500 - 1500 mm Max. reel  ...

Category: 109: other metal working machines
New in: 1970
Price: used machinery auction RESALE 7.500 €
Location: Land-es ES Spain, 08240 Manresa
Seller: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 6000 x 2400 x 2200 mm Description: Maximum diameter 500 mm. Minimum diameter 30 mm. Minimum/maximum module 2/10. Helical angle 30º. Grinding length 150 mm. Number of strokes 35/200. Maximum work-piece weight 300 Kg

Category: 109: other metal working machines
New in: 2015
Price: 370.760 €
Location: Land-pl PL Czluchów
Seller: NETBID Polska Sp. z o.o.

Production line for applying shielding (welding, corrugating) R K-W Product Data: Cable type: Radio frequency coaxial cable Cable core diameter (mm): 4,6 - 42,9 mm (inch): 1/4" - 1 5/8" Metal type: Copper Stock tape width: 22 -150 mm Metal tape thickness: 0,2 - 0,5 mm Welding method: TIG Line Data Line geared for: max. 45 m/min. at barrel diameter: 400 mm Cable passage over floor: 1000 mm Reel data Pay-off stand: AUF 5.16 Flange diameter: 800 1600 mm Width over hubs: 500 - 1500 mm Max. reel weight: 5.000 kg Longitudinal tape pay-off: MHR 300 Outer diameter: max. 1.200 mm Tape width: 21 - 320 mm Inner diameter: 380 - 430 mm  ...

Category: 109: other metal working machines
New in: 1976
Price: used machinery auction RESALE 250 €
Location: Land-es ES Spain, 08240 Manresa
Seller: Surplex GmbH

Weight approx.: 100 kg Dimensions (l x w x h) approx.: 800 x 200 x 301 mm Description: Maximum distance between centres 200 mm. Minimum distance between centres 45 mm

Category: 109: other metal working machines
New in: 2015
Price: 533.600 €
Location: Land-pl PL Czluchów
Seller: NETBID Polska Sp. z o.o.

Production line for applying internal insulation R K-C Manufacture Date 2015 Location Polen Description Production line for applying internal insulation R K-C Product Data: Material of inner conductor - Copper (solid), - Aluminum (solid), - Copper cladded Aluminum Required tensile strength for copper conductor: 210 N/mm2 Product range: RG59 - 1/2" RF Diameter of inner conductor: 0,81 - 5 mm Diameter over insulation: 3 - 12,5 mm Wall thickness of insulation: 1,0- 4,5 mm Material for insulation PE (phys. foaming degree up to 84 %) foaming degree depending on product dimension. Material for adhesive layer: LD-PE Line Data Line geared ...

Category: 107: sheet metal working
New in: 1990
Price: used machinery auction RESALE 1.000 €
Location: Land-es ES Spain, 08240 Manresa
Seller: Surplex GmbH

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 700 x 600 x 1100 mm Description: Maximum diameter 200 mm.

Category: 1101: power generators
New in: 1998
Price: 10.000 €
Location: Land-de DE 22844 Norderstedt, Oststraße 11
Seller: Standard Aggregatebau Evers GmbH & Co.KG

Power: 200 kVA / 160 kW Diesel engine (four-stroke) / type / Nr.: Iveco / GE 8361 SRI 26.06 / 417663 Cylinder: 6 Cooling: Mechanical radiator cooler Generator / type / Nr.: Leroy Somer / LSA 46.1 M5 C6/4 / EK084942 / 02 Voltage: 400V Frequency: 50 HZ Speed: 1500 min-1 Type: complete unit on base frame Tank: - Switchgear / Starter: automatic switchgear Kuhse / electric Battery voltage / capacity: 24V Generator switch: Yes (in separate cabinet) Power switch: Yes (in separate cabinet) Auto: Yes (Kuhse KEA 101 SPL) Accessories: -. Dimensions (L X W X H): approx. 2630 x 830 x 1540 mm Weight: approx. 2000 kg

Category: 109: other metal working machines
New in: 1976
Price: used machinery auction RESALE 250 €
Location: Land-es ES Spain, 08240 Manresa
Seller: Surplex GmbH

Weight approx.: 100 kg Dimensions (l x w x h) approx.: 800 x 200 x 300 mm Description: Maximum distance between centres 200 mm. Minimum distance between centres 45 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)