gear shaving used for sale

Gear motor, electric motor -Speed: 29 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 65 -Weight: 44 kg

Geared motor, electric motor, electric geared motor -Speed: 5.83 rpm -Power: 0.75 kW -Design: B5 angle -Hollow shaft diameter: 42 mm -Protection class: IP 54 -Quantity: 2 pieces available -Price: per piece -Dimensions: 560/240/H320 mm -Weight: 56 kg

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

gear motor, electric motor, electric gear motor -Speed: 7.77 rpm -Power: 0.75 kW -Design: B5 -Hollow shaft diameter: 42 mm -Protection class: IP 44 -Number: 1x engine available -Dimensions: 580/240/H300 mm -Weight: 56 kg

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 500/260/H210 mm -Weight: 34 kg

Gear motor, electric motor -Speed: 87 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 475/175/H180 mm -Weight: 20 kg

Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 510/270/H220 mm -Weight: 36 kg

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

gear motor, electric motor, electric gear motor -Speed: 29.5 rpm -Power: 0.075 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor -Speed: 142 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Dimensions: 440/245/H170 mm -Weight: 21 kg

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

Gear motor, electric motor -Speed: 59 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 475/190/H170 mm -Weight: 18.90 kg

Gear motor, electric motor -Speed: 0.49 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 60 mm -Protection class: IP 54 -Dimensions: 740/380/H410 mm -Weight: 133 kg

Gear motor, electric motor -Speed: 14 rpm -Power: 0.11 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 37 kg

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

The machine is in good technical condition, testing is possible by prior arrangement.

Gear motor, electric motor -Speed: 2.5 rpm -Power: 0.25 kW -Design: B3/B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1x piece available -Dimensions: 630/260/H230 mm -Weight: 27 kg

Gear motor, electric motor, electric gear motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 410/210/H230 mm -Weight: 25 kg

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 520/210/H290 mm -Weight: 33 kg

I am selling this hobbing machine. Plugged in, can be tested. Many accessories. Technical parameters: Max. wheel: 7100 mm Gear wheel width: 1500 mm Max. module: 45 Table diameter: 4000 mm Cutter diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Planer diameter: 500 mm Planer speed: 9–63 rpm Total power consumption: 47 kW Weight: 160,000 kg

Gear motor, electric motor -Speed: 34 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 145/200/H280 mm -Weight: 8 kg

Gear motor, electric motor -Speed: 32 rpm -Power: 0.75 KW -Design: B5 -Diameter shaft: Ø 32 mm -Protection class: IP 55 -Number: x motors available -Price: per piece -Dimensions: 490/200/H235 mm -Weight: 27 kg

Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Dimensions: 570/240/H200 mm -Weight piece: 37 kg

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 25 kg

Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422

Gear motor, electric motor, electric gear motor -Speed: 40 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 38 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 530/210/H240 mm -Weight: 44 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 2.3 rpm -Power: 0.025 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 280/180/H110 mm -Weight: 5.5 kg

Gear motor, electric motor -Speed: 89 rpm -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 500/250/H210 mm -Weight: 35 kg

Gear motor electric motor Electric gear motor -Speed: 16 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Dimensions: 620/300/H260 mm -Weight: 54 kg

Gear motor, electric motor -Speed: 11.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 32 mm -Protection class: IP 44 -Weight: 24 kg

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

Liebherr / Lorenz S800 Gear - Hobbing Machine -Max. workpiece length with counter holder 600mm -Max. workpiece length with retracted counter holder 800mm -Max. travel of the milling carriage 360mm -Largest millable pitch for the largest workpiece 5 Pi / in the normal power range 8 Pi -Pick-up taper - milling spindle MK 5 -Mandrel 22/27/32/40mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter displacement 80mm -Milling cutter speeds 40-220 rpm -Feeds infinitely variable / horizontal -Feeds infinitely variable / vertical -Feeds infinitely variable / tangential -Clamping table without water rim 550mm -Clamping table hole 100mm -Mandrel taper MK5 Accessories: 1x pallet interchangeable wheels 1x pallet hob 1x pallet clamping mandrels Documentation Machine feet Dimensions: LxWxH 3.6x1.8x1.9 meters / weight 5000Kg

Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

Max. wheel diameter: 1600 mm Min. disc diameter: 800 mm Gear width: 560 mm Max. module: 16 Minimum module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine connected, can be tested. Machine equipped

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...

max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SEW Eurodrive Type SA67 DT90L-4 ZFISITI 3 chamfer 400 volts 1.5 kW 26 RPM Shaft 40 mm L 52.00cm W 25.00cm H 25.00cm

Gear motor electric motor -Speed: 21 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 390/270/H210 mm -Weight: 17 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 23 kg

Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg

Gear motor, electric motor -Speed: 117 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: -Weight: 28 kg

max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8974 Type: OFA 16 SC Producer: TOS Generated: Parameters: Machine weight: 5 t

Gear motor electric motor Electric gear motor -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg