gear shaper used for sale

Gear motor electric motor -Speed: 21 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 390/270/H210 mm -Weight: 17 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 23 kg

Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg

Gear motor, electric motor -Speed: 117 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: -Weight: 28 kg

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

Gear motor electric motor Electric gear motor -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Geared motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.25/0.3 kW -Design: B3 -Shaft diameter: Ø 30 mm -Length: 180 mm -Protection class: IP 44 -Dimensions: -Weight: 25 kg

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Gear motor, electric motor, three-phase motor -Manufacturer engine Bonfiglioli type: 55BN-2 -Gearbox manufacturer Bonfiglioli type: -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: -Weight: 4 kg

Gear motor, electric motor, three-phase motor -Manufacturer Motor Bonfiglioli Type: 56BN/4 -Manufacturer gearbox Bonfiglioli type: -Power: 0.12kw -Construction: B5 angle -Number: 1x available -Weight: 5kg

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Gear shpping machine LIEBHERR LS 200F.

Gear motor electric motor Electric gear motor -Speed: 180 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter shaft: 22 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 17 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer Nord type: SK71L/4 -Gearbox manufacturer Nord type: SK12-71L/4E -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: -Weight: 17 kg

Gear motor, electric motor -Speed: 490 rpm -Power: 2.2 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 52 kg/pc.

max. wheel diameter: 400/500 mm CNC-Control: GE FANUC Series 160i-M pinion diameter - max.: 400 mm crown gear diamter max.: 500 mm x-axis: +/- 70 mm y-axis: 200 mm z-axis: 200 mm axis angle: 90 Grad speeds:: R 0 - 3000 / T 0 - 5000 1/min rated current: 30 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,2 x 2,5 x 2,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, electric geared motor -Speed: 250 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 65 -Brake Quantity: 1 piece available -Dimensions: -Weight: 42 kg

Gear motor, electric motor, electric gear motor -Speed: 16 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 29 kg

Gear motor, electric motor, three-phase motor -Speed: 31/62 rpm -Power: 0.37/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 39 kg

Gear motor, electric motor, electric gear motor -Speed: 20/40 rpm -Power: 0.22/0.3 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: -Number: 5x motors available -Price: per piece -Dimensions: -Weight: 38 kg

Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422

Gear motor, electric motor -Speed: 46/92 rpm -Power: 0.7/1.1 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 31 kg

Gear motor, electric motor -Speed: 83 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 440/240/H210 mm -Weight: 26 kg

Gear motor electric motor Electric gear motor -Speed: 16 rpm -Power: 0.33 kW -Construction: B3 -Diameter shaft: 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Weight: 43 kg

Gear motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.37/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 39 kg

Gear motor, electric motor, electric gear motor -Engine manufacturer: Bauer -Gearbox manufacturer: Bauer -Speed: 45 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: -Dimensions: -Weight: 56 kg

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

Gear shapping machine LIEBHERR LFS 200

Edhard Gear Set for Filling FunnelProduct descriptionManufacturer: EdhardDishwashers fixedDetails see pictures

Gear motor, electric motor -Speed: 45 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 440/215/H180 mm -Weight: 21 kg

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Quantity: 1 piece available -Weight: 26 kg

Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.

max. wheel diameter: 762 mm gear width: 116,84 mm max. module: min. module: total power requirement: 145 kW weight of the machine ca.: 27 t dimensions of the machine ca.: 5,5 x 5,3 x 3,4 m With the GLEASON Phoenix® 800HG bevel gear grinding machine, manufacturers of spiral, hypoid, and other bevel gears for large components can significantly increase their productivity. The machine enables faster grinding processes while maintaining the highest accuracy and excellent repeatability. Its extremely robust machine design forms the basis for stable machining processes, even for large workpiece diameters of up to 762 mm. Combined with a powerful FANUC CNC control system, the 800HG offers maximum flexibility for a wide range of gear geometries—from spiral and hypoid bevel gears to special forms. Thanks to its well-thought-out machine concept, the Phoenix® 800HG allows for reduced setup ti ...

Gear motor, electric motor -Speed: 295 rpm -Power: 0.75 kW -Design: B5 -Diameter shaft: Ø 25 mm -Protection class: -Price per piece -Quantity: 2x available -Weight: 22kg

max. wheel diameter: 1000 mm gear width: 180 mm max. module: 7 min. module: 0,5 min. ram stroke: 16 mm max. ram stroke: 180 mm table hole: 160 mm total power requirement: 4 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, electric geared motor, aseptic motor -Manufacturer: SEW-Eurodrive, geared motor aseptic motor type WAF30 DAS80K4/TF/IS -Speed: 173 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 100 mm, built-in shaft Ø 15 x 30 mm -Flange: Ø 120 mm -Recess: Ø 80 mm Protection rating: IP66 -Number: 2x geared motors available Price: per piece -Dimensions: 385/150/H210 mm -Weight: 14 kg/pc.

Gear motor, electric motor -Speed: 11 rpm -Power: 0.1 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Weight: 24 kg

Gear motor, electric motor -Speed: 113 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: -Weight: 16 kg

Gear motor, electric motor -Gearbox manufacturer: SEW -Engine manufacturer: SEW -Speed: 20/40 rpm -Power: 0.55/0.66 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: -Price: per piece -Number: 7x available -Dimensions: -Weight: 53 kg

Gear motor, electric motor -Speed: 133 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Brake -Protection class: IP 54 -Weight: 12 kg

Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 16.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight piece: 47 kg

Condition NEW Brand Siemens Type CAF38 AK90LP4 Voltage Volt 1 chamfer 230 volt Power KW 1500 watt 1,5 KW 111 Nm RPM 95 RPM speed Shaft size mm 25 mm Version Version 32 kilo Units in stock 10 Length 50.00cm Width 25.00cm Height 18.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Gear motor, electric motor, three-phase motor -Speed: 84/128 rpm -Power: 0.48/0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Weight: 25 kg

Gear motor, electric motor, electric gear motor -Speed: 3.15 rpm -Power: 0.18 kW -Design: B3 -Diameter shaft: 60 mm -Protection rating: IP 44 -Quantity: 1 piece available -Dimensions: -Weight: 62kg

Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, gearmotor type WAF20 DR63S2/TF -Speed: 332 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 110 mm /Shaft Ø 15 x 30 mm -Protection class: IP55 -Number: 2x gear motors available -Price: per piece -Dimensions: 360/190/H250 mm -Weight: 7.7 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 16.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: -Weight: 33 kg

Gear motor, electric motor -Speed: 83 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Weight: 56 kg