gear hobbing fo used for sale

mechanical force transducer, force measuring bracket FORCE GAUGES HALLE 0 - 10 kN 1 t in wooden box Dimensions: 250 x 150 x 85 mm

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -Voltage: 24 volts -Power: 25 A -Connection: 230 volts -Weight: 30 kg

mechanical force transducer, force measuring bracket FORCE MEASURING INSTRUMENTS HALLE 0 - 2000 N 200 kg in wooden box Dimensions: 250 x 150 x 85 mm

Forklift battery charger, industrial charger, forklift battery charger -24 volts -Power: 63 A -Connection: 220 volts

Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: Rohm, precision four-jaw chuck O 260 mm -Throughout: Ø 70 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Beeks: individually and completely adjustable -Weight: 39 kg

Shaft forks 1 pair PAGUS 1300 x 800 x 100 mm Fork width: 120 mm Fork height: 40 mm Shafts Ø: 50 mm used,, tested ! Dimensions: 1300 x 800 x 300 mm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set, 4-piece hard -Jaw width: 38 mm -Dimensions: see photo techn. drawing -Dimensions: 130/150 / H90 mm -Total weight: 8.8 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Control unit, control panel, operating panel, control unit, foot switch, safety foot switch -Foot switch: Safety foot switch from Promecam STPC 250 40 121 press brake -Metal housing: with protective cover -Overall dimensions: 380/180/H165 mm -Weight: 6.7 kg

Operating unit, operating panel, operating panel, operating unit, foot switch, safety foot switch -Foot switch: Safety foot switch from press brake Promecam STPC 250 40 121 -Metal housing: with protective hood -Total dimensions: 500/400/H220 mm -Weight: 6.5 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 2 parts -Upper tool: dimensions 835 x 60 x 130 mm each -Dimensions: see the drawing in the photos -Total weight: 47.5 kg

Bending tool, die, upper knife, upper tool -Tool: for press brake, 9 pieces -Dimensions: 95 x 31 mm -Total length: 5005mm -Dimensions: see the drawing in the photos -Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each -Transport dimension: 835/210/100 mm -Weight: 86 kg

Bending tool, die, upper knife, upper tool -Tool: for press brake, 11 pieces -Tool: 60° -Dimensions: 95 x 36 mm -Dimensions: see the drawing in the photos -Total length: 7780mm -Lengths: 8x 835 / 2x 600 / 1x 500 mm -Transport dimension: 835/400/324 mm -Weight: 182 kg

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal actuator -Manufacturer: L-TEC, Pedal actuator foot remote control type FC-4 -Connector plug: 5-pin -Overall dimensions: 300/155/H190 mm -Weight: 4.2 kg

Biscuit forming machine Biscuit machine Janssen FM126M8 - Pastry forming machine - Manufacturer: Janssen - Model: FM 126 M8 - 380 volts

Serial No. FH. HCC0-00630, Pallet Feeder, 4 Pockets, 2 Knives, Delivery

2-roll flow-forming line NAM600S General condition: practically new / already out of service Scraper device (around the tailstock) Working stroke max. 500 mm Scraper force, infinitely variable from 50 - 200 kN Hydrau I i k / lubrication / cooling system Drive power Hydraulics approx. 75 kW Olin content Hydraulic tank approx. 1,500 I Equipment/Com ponents Hyd raulics Make Parker Hannifin Drive power oil lubrication approx. 4.4 kW Olin content Lubricant tank approx. 600 I Equipment/Com ponents Lubricant system Make Parker Hannifin Connected load Cooling system approx. 2.2kW lnhalt Coolant tank approx. 650 I Powerful coolant supply, adjustable 0 - 200 l/min. Cooling water requirement hydraulics + lubrication approx. 2.500 /h Cooling water flow temperature max. 25C min. Cooling water differential pressure 2bar Cooling water system jerk max. 5 bar Compressed air system pres ...

Folding machine steel TD 52/4/4/2 Year of manufacture 2001 Art.Nr. PS6422 Rollers in the TD 52-2 plant would have to be replaced

Pneumatic valve, air valve, pressure valve, on-off valve, button valve, foot switch -Manufacturer: Festo, button valve foot switchl ovp -Type: F-3-M5 Mat. no. 4452 series A508 -Working pressure: 0.0 - 8 bar -Number: 2x button valves available -Price per piece -Dimensions cardboard: 65/55/H85 mm -Weight: 0.4 kg/pc.

- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Still, charger Belatron type E 24/90 eco EU -Input voltage: 220 V 50 Hz -Power: 25.2 V/90 A -Dimensions: 550/410/H780 mm -Weight: 94 kg

Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

Screen deck 2-fold, 60x100cm Coarse/Fine: 3mm/5mm Coarse/Fine 2mm/6mm 4 pieces in stock

6 pockets 2 knives upright sheet delivery SBPD mobile knife

Roller width: 350 mm roll diameter: 110 mm Roller covering - soft rubber: 70 Grad shore rubber: NBR - Qualität Pressure line: 28 N / mm air pressure: max. 4 bar Capacity of dye tub: Becken - 1,3 Liter Capacity of dye tub: Zwickel - 0,3 Liter Speed driven roll: 0-25 U/min speed: 1 - 10 m/min voltage: 230 V / 50 Hz drive motor: 0,4 kW weight: 130 kg dimensions: 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, content: 1.3 litres, • with controllable motor drive, direct drive effected of the fixed roll, by means of wheels the pressure roll is driven when the nip is open. The data for this ad was created with ModulMWS - the softwar ...

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: Bernstain, Foot switch type F1-U1 UN -Voltage: 10A 500V-AC IP65 -Connector: 6-pin -Metal housing: with protective cover -Overall dimensions: 280/150/H760 mm -Weight: 3.3 kg

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: SSUPOU, Foot switch type F1-U1 UN -Connector: 3-pin -Dimensions: 220/177/H141.5 mm -Weight: 2.5 kg

- Flat pile feeder - Tremat - Digital control - 1. Station with 4 buckles - Cross fold station with 2 knifes + buckle - SAK 56 mobile delivery

Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° -Dimensions: see the drawing in the photos -Dimension: 39 x 254 mm -Length: 2085 mm / each 1 x 680/445/350/200/180/105/70/55 mm -Weight: 112 kg

Injection molding machine, clamping force control unit, control unit -Manufacturer: Demag Kunststofftechnik, clamping force control unit -Type: DMS-SKR 79/5 ID no. 064 929 65 RMS -Dimensions: 165/95/H95 mm -Weight: 0.7 kg

Flat pile feeder, folding unit with 4 pockets, 1 sword folding unit, shed delivery

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 12 pieces -Tool angle: 28° -Dimensions: see the drawing in the photos -Dimension: 23 x 245mm -Length: 4386 mm / each 1 x 748/730/715/700/400/198/180/150/100/65 mm, 2x 200 mm -Weight: 175 kg

Base plate, site fence base, barrier base -Manufacturer: Schake TL plastic footplate, 3 pieces -Type: K1 - Pockets/Dimensions: see photos -Price/delivery: complete -Transport dimension: 880/440/H360 mm -Total weight 87 kg

Electrode tongs, electrode device, electrode welding device -Electrode clamp: cable without plug -Length: 5m -Weight: 4.5 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, Timetronic ECO JH charger -Type: D400 G 24/70 B-ETIS -Input voltage: 400V 50-60Hz -Power: 24V/70A -Dimensions: 500/500/H730 mm -Weight: 55 kg

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 60 mm -Hole circle: Ø 170 mm -Weight: 9.3 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type GFWEA/W 24/70 -Input voltage: 220V 50Hz -Power: 25.2V/70A -Dimensions: 555/360/H690 mm -Weight: 55 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 65/80/H45 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo techn. drawing -Total dimensions: 80/90/H55 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H50 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg

ALD 600 Automatic Pastry Line The ALD is a very flexible and productive line, the dough is gently processed. Suitable for various types of baking and baking pastry dough (with less than 70% moisture content), such as wholemeal, rye, hard, soft dough, with or without yeast, cookie dough, gluten-free, even dough with dry pieces (or other crushed food materials). Working width: 600 mm Capacity: 250kg/hour Quantity: 3000 pcs/h (extruded) Quantity: 3200 pcs/h (wire cut) Facility consisting of: Roller extruder with different shape beams including wire cutting device Spreading device for various product granules Guilotine for strand products Deposition on sheet metal Machine in stainless steel Control via touchscreen display Connected load: 3.8 kW - 400V - 50Hz - 3Ph Dimensions:( L x W x H ) : 600 x 70 x 180 cm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg

Max. size= 65 x 35 cm, Availability= 032025, izes-max. 350 x 650 mm sizes-min. 70 x 90 mm smallest fold 15 mm Equipment: continuos suction feeder width: 35 cm folding unit 4 bags complete folding rollers neu 2025 Suction drum feeder for papers up to 30 - 180 g/m² Suction drum new in 2025 counter vertikal sheet delivery GUK stream delivery LOT Loaded in truck or container

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990