gear grinder used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 121 rpm -Power: 1.5 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 530/230/H210 mm -Weight: 35 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 178 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø mm -Protection class: IP 54 -Dimensions: 480/150/H200 mm -Weight: 30 kg

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 130 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø mm -Protection class: IP 54 -Weight: 5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 440 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: IP 54 -Weight: 3.3 kg

Gear motor, electric motor, three-phase motor, electric gear motor -small output shaft speeds: 1290 rpm -Diameter shaft: Ø 11 mm -Hollow shaft output shaft speeds: 91 rpm -Diameter shaft: Ø 19 mm -Power: 0.25 kW -Construction: angle hollow shaft -Protection class: IP 44 -Dimensions: 320/160/H180 mm -Weight: 14.5 kg

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 109 rpm -Power: 3 kW -with brake: 24 V -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54 -Dimensions: 850/300/H300 mm -Weight: 91 kg

Gear motor, angular gear motor, electric motor, electric gear motor, three-phase motor -Angular gear motor -Motor power: 0.55 kW -Speed: 48 rpm -Pulley: Ø 170 mm -Construction: B5A -Shaft diameter: Ø 20 x 30 mm -Dimensions: 430/250/H190 mm -Weight: 19.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 60 rpm -Power: 0.10 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Dimensions: 245/130/H110 mm -Weight: 3.8 kg

Gearbox, spur gear -Translation: 1:14 -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg

gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mounting: Inner Ø 42 mm -Dimensions: see photos -Overall dimensions: Ø 80 x 60 mm -Weight: 0.9 kg

Gear motor, electric motor, electric gear motor -Motor: FIMEA type LR 71 b4 -Gearbox: 21 rpm, with oil level indicator -Power: 0.37 kW -Voltage: 220/380 volts -Hollow shaft: Ø 24 x 100 mm -Protection class: IP54 -Brake: 380 v -Dimensions: 470/160 / H195 mm -Weight: 19 kg

Linear drive + planetary gearbox, stroke 880, EGC-HD-220-880-TB-0H-GK, 556825 +.., Festo, mint condition Special price The current price of a similar product is € 5381 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-HD-220-880-TB-0H-GK, 556825, current market price € 4.424 Overall dimensions: 1470x380x120mm, 70kg, Slide length 220mm, stroke 1500mm, A blue front cover and a black round rear cover will be supplied at a later date. 2) Neugart planetary gearbox, PLE120-005-SSSB3AF-E19/40/95/115/B5/M8, 42635, Festo number 552197, gear ratio 5:1, cur ...

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Linear actuator + planetary gearbox, stroke 1500, EGC-120-1500-TB-KF-0H-GV, 556815 +.., Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x290x120mm, 70kg, slide 300x70mm, stroke 1500mm, A blue cap at the front and a black round cover at the rear will be supplied later 2) Neugart planetary gearbox, PLE080-005-SSSB3AE-E19/40/95/115/B5/M8, 42631, Festo number 552195, transmission ratio 5:1, 6 months warranty We give you 6 months warranty for these goods from the date of invoi ...

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

max. wheel diameter: 400/500 mm CNC-Control: GE FANUC Series 160i-M pinion diameter - max.: 400 mm crown gear diamter max.: 500 mm x-axis: +/- 70 mm y-axis: 200 mm z-axis: 200 mm axis angle: 90 Grad speeds:: R 0 - 3000 / T 0 - 5000 1/min rated current: 30 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,2 x 2,5 x 2,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Stöber, Gearbox type C002NO 105MQ10 -Translation: i 10,297 -Drive shaft: Ø 20 x 40 mm -Dimensions: see photo technical drawing -M2 perm: 43 Nm / n1= 3000 rpm -Dimensions: 240/140/H155 mm -Weight: 9.1 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Vector, geared motor -Type: R40 DT80K-4 -Speed: 112 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 457/193/H155 mm -Weight: 18 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, geared motor -Type: R40 DT71D4 -Speed: 32 rpm -Power: 0.37 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Dimensions: 405/146/H213 mm -Weight: 15.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: SEW Vector, geared motor -Type: R40 DT80K-4 -Speed: 224 rpm -Power: 0.55kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 460/190/H160 mm -Weight: 17,2 kg

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Vector, geared motor -Type: SA47T DT80K-4 -Speed: 36 rpm -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 55 -Dimensions: 425/200/H260 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor type SK 0-63L74-016 Speed: 148 rpm -Power: 0.18 kW -Shaft: Ø 16 x 40 mm -Protection class: IP44 -Dimensions: 340/130/H170 mm -Weight: 9 kg

Geared motor, electric motor, electric geared motor -Manufacturer: ABI, Geared motor type WDF271x -Speed: 25 rpm / i=1:59 -Power: 0.12 kW -Shaft: Ø 20 x 20 mm -Protection rating: IP55 -Dimensions: 310/165/H185 mm -Weight: 9.5 kg

Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.

UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG

Geared motor, electric motor, electric geared motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 91 rpm i 15.0 -Engine: Neri Motori type T56B4 -Power: 0.09 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Protection rating: IP55 -Dimensions: 265/110/H155 mm -Weight: 4 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor type ZG2 KMR 80 K 4 -Speed: 80 rpm -Power: 1.1kW -Type: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimension: 500/200/H260 mm -Weight: 29 kg

max. wheel diameter: 2500 mm gear width: 980 mm max. module: 34 min. module: 2 grinding stroke stepless adjustable: 1000 mm root circle dia. min.: 180 mm number of teeth: frei wählbar max.helical angle: 0 - 35 ° grinding slide stroke: 20 / 200 U/mm grinding wheel peripheral speeds:: 35 / 45 m/s grinding wheel diameter: 340 / 435 mm grinding motor: 22 kW pressure angle: 12,5 - 30 ° table diameter: 1300 mm table load capacity: 10000 kp table bore diameter: 300 mm depth of hole: 300 mm roll feed: 0 - 1000 m/min table diameter: 1300 mm workpiece weight: 10000 kg clamping length: 2760 mm clamping height: 420 - 590 mm table bore diameter: 280 mm depth of hole: 300 mm Control: BWO H+K CNC 785 total power requirement: 79 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 7,3 x 7,9 x 4,5 m - 10 axis CNC control BWO H+K CNC 785 (2nd Generation from 2009) - integrated measurement ...

Gears, spur gears, bevel gears, worm gears -Manufacturer: Nord, gearbox type SK 42125AD-100 L/4 -Translation: i = 87.30 -Drive shaft: hollow shaft Ø 60 x 235 mm -M2 max: 1892Nm -Dimensions: 380/250/H470 mm -Weight: 101 kg

max. wheel diameter: 620 mm gear width: 90 mm max. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Grad spindle taper: metr. 100 milling head speed: 28 - 56 U/min connected load: 18 kVA Control: total power requirement: 14 kW weight of the machine ca.: 12 t 2020 Retrofit with new control/electrical system) - CNC control NTC (Fanuc) (German/English) - electric handwheel - new motors/ electrics - various change wheels - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear, cogs, spur gear -Gear: helical, 59 teeth -Diameter: Ø 344 mm -Tooth width: 80 mm -Dimensions: see photos -Total dimensions: Ø 344 x 467 mm -Weight: 78 kg

Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

max. wheel diameter: 1000 mm gear width: 180 mm max. module: 7 min. module: 0,5 min. ram stroke: 16 mm max. ram stroke: 180 mm table hole: 160 mm total power requirement: 4 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1400 mm gear width: 400 mm max. module: 25 min. module: 1 total power requirement: - kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,0 x 1,2 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling head, upper head, mechanically switchable clutch, clutch gear, gear clutch -Clutch gear: Gear for mechanical clutch -Type: unfortunately no type designation -External: Ø 345 mm -Inside: Ø 223/218 mm -Width: Outside 53mm / Inside 70mm -Dimensions: see photos -Total dimensions: Ø 345 x 70 mm -Weight: 8.8 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: G12-10/DK 84-200L -Speed: 40 rpm -Power: 0.75 kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 65 -Brake: 5 Nm -Dimension: 570/235/H195 mm -Weight: 34 kg

Gear motor, electric motor, electric gear motor -Manufacturer: KEB, gear motor type G 3.2 C DA 71 G 4 -Speed: 20 rpm -Power: 0.37kw -Shaft: Ø 30 x 60 mm -Protection class: IP55 -Type: B5 -Dimensions: 435/160/H220 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ASUG VEM, geared motor -Transmission: ASUG type GWWN 1052 -Engine: VEM type KMR 56 K 4 -Power: 0.12 kW / 1360 rpm -Protection class: IP44 -Total dimensions: 290/135/H185 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type C30-63K/4DC -Speed: 106 rpm -Motor: 0.12 kW / 1340 rpm -Shaft: Ø 20 x 40 mm -Protection class: P33 -Total dimensions: 335/170/H170 mm -Weight: 11 kg

adjustable gearbox, variable speed gearbox, spindle gearbox -Manufacturer: PIV, variable speed transmission -Type KS 712 B3 -Shaft diameter: 19 x 28 mm -Shaft diameter: 19 x 40 mm -Individual components: see photos -Overall dimensions: 385/350/H310 mm -Weight: 38 kg

Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Attention: This is an original product from Neugart and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50mm, centering 180mm, pitch circle 215mm, z=4, 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our websit ...

Gear slotting machine STANKO 5140

Gear Slotting machine 5A140

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...