gear cutting used for sale

Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection

Manufacturer:BIERREBI Model: TA103 Year of Manufacture: 2002 Type of Machine : Automatic cutting machine for knitted fabrics Condition : very little used Overlaying, marking, cutting, stacking, and counting. All these operations are now integrated into the TA103 automatic cutting system. The TA103 automatic cutter requires only one operator to position the garment pieces. All other tasks can be performed automatically with high precision and remarkable operational simplicity. With the TA103 automatic cutter, everything is simplified, faster, and more cost-effective. Bodies, sleeves, raglans, cardigans, polos, striped garments, solid colors, plaids, and marked garments can all be processed. The TA103 allows for precise and consistent cutting quality without the need for highly specialized labor. Machine production capacity: Produces up to 960 sleeves per hour Produces 90 to 150 ...

Bystar 3015 4.4KW CO2 Laser very good condition at call

x-axis: 550 mm y-axis: 350 mm z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm volume: 1200 L inclination: +/-30°/400 mm dimensions: 1200x700x400 mm weight: 1500 kg wire dia.: 0,10-0,33 mm Bobbin Weight max.: 25 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine configuration 1. 6kw Raycus Fiber Laser Source 2. HSG Laser Cutting Head P10 3. HSG Alpha T-Bus Control 4. HSG-NEST nesting software 5. Monitor with touch function 6. Aluminum crossbeam 7. Hiwin Linear Guide 8. Inovance servo motor and driver 9. SMC Oxygen Control Valve 10. Collision protection 11. Automatic lubrication 12. Ergonomic remote control 13. WLAN / LAN connection 14. Electronic components from Schneider, Eaton and Noark 15. Pneumatic components from Aventics 16. Fault monitoring of the main machine, laser source as well as chiller 17. Cutting gas low pressure alarm function 18. Water Chiller 19. Extraction system Interchangeable table system: 1500mm x 3000mm Further configurations are available with regard to the fiber laser power output and the processing area

Mazak NTX 48 Turbo CO 2 Laser cheap MAZAK laser cutting machine NTX48 1.5kW Year of Make: 1998 well-preserved, overhauled MAZAK laser machine with 1500W Panel size: 2500mm x 1250mm Minimum installation area of 2.6m x 6m Completely encapsulated machine cover FE: up to 15mm VA: up to 6mm Plastic possible Wood possible incl. software incl. suction Machine was completely overhauled by Mazak 1,000 hours ago (lenses, mirrors, oils). Includes Acer Laptap with software Si Cam including dongle Video on request To be visited under power

HSG Fiberlaser Model Laser Power G12025FA 12-60kW Working range : 12100×2500mm or G12035FA 12-60kW Working range : 12100×3500mm o Up to 45 degrees 3D machining optional. Perfect to replace your old plasma cutting machine. 12-60kW Cutting Head 3D(Optional) Max. Linkage Acceleration 0.5G Max. Linkage Speed 80m/min more information on request

MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...

3 KW Fiber Dimensions round cross-sections (min.–max.) 10–130 mm Square dimensions Cross-sections (min.–max.) 10 × 10–130 × 130 mm Dimensions of other cross-sections (min.–max. length of sides) 10 × 10–130 × 130 mm Max. pipe weight 17 kg/m Loading length 6,500 mm Unloading length 4,000 mm Cross-sections round, square, rectangular, oval, closed standard profile very few hours

Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg

CNC Plasma Cutting Machine MGM Arrow 2000-4 , Year 2008 Control: MS 100 Working Area : 2000mm x 4000mm 1 x Plasma Kjellberg HiFocus 160i with automatic gas console - incl. extraction 5500m³ built in 2006 / MGM - incl. declaration of conformity - incl. tech. Documentation - Incl. various nozzles (spare parts) at call

Bystronic Bysprint 3015 Fiber 4 KW Working area : 3000mm x 1500mm With interchangeable table Laser on: 21,000h Including Airco nitrogen generator at call

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Color display - TouchScreen - Program - Air table - Side table with air left - Mounted lift right - 2 HSS blade - with the existing accessoires

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tilting double miter saw for chair elements with loader TECNOSYSTEM - CE

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Semi-automatic cut-off machine CURSAL mod. TRV 500 – CE compliant - Version with movable pressure - Feed from right to left - Rug GRT 6000x400 - N. 3 unloading benches 1000x1200 - Rejector mod. SIVARON SS-80 - Waste discharge belt tss 45° mm. 2500 - Matr. 972842 - Year 1997 - Complete with CE declaration and manual

BOTTENE shaft mounted cut-off saw - complete with roller conveyor

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Manual bench miter saw with mm blade. 350

Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...

REF-2741 KRONEN SPIRELLO SP150 VEGETABLE SPIRAL CUTTING MACHINE Manufacturer: KRONEN Model: SPIRELLO SP150 Serial no.: 199 Year: 2017 Automatic machine for cutting vegetables into long spirals. With a capacity of up to 340 kg/h (depending on the product), the SPIRELLO 150 is an unbeatable option for processing large amounts of vegetables into perfect and decorative spirals and strips. Mobile on casters for easy movement. Electrical specifications: 230 V/50 Hz/0.9 kW/1PH Working pressure: 6 bar Two product centring units: diameters 85 mm and 150 mm Max. product length: 300 mm Max. product weight: 2,5 kg Overall dimensions (mm): 850 x 600 x 1,800 (LxWxH) Weight: approx. 180 kg CE marking

Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120

Code: 0355 Brand: AVOLA - GERMANY Model: GAMA 65 K - CE Standard Cutting centre for timber joinery, beams, timber roofs, sawmills, balconies, garden furniture and various – CE Standard Technical data: Lower cross-cut saw with rotating table and tilting blade Vidia blade diameter mm 650 Hole 30 Pneumatically operated safety cover Motor 10 Kw Motor speed 3000 rpm Pneumatic clamping cylinders Pneumatic cross-cut device with two-hand control Electric blade tilt adjustment 90–30° with flat digital display 5–175° Cutting height at 90° 245 mm Cutting height at 45° 164 mm Cutting height at 30° 113 mm Laser cutting guide Table dimensions mm 1500 x 1500 Work table height mm 1000 Handling brackets for forklift truck Right Roller conveyor mm 3000 x 600 - Support guide 5000 mm Left Roller conveyor mm 3000 x 600 - Support guide 5000 mm Overall dimensions of ass ...

CNC CO2 Laser Cutting Machine Bystronic Bystar 3015 Laser source: ByLaser 4400, Laser power: 4400W (4.4kW), Working area X/Y/Z: 3000mm/1500mm/170mm, Max. workpiece weight: 890kg, Positioning accuracy: +/-1mm, Repeatability: +/-0.05mm, Rapid traverse: 50m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Max. sheet weight: 160kg/m². Control: ByVision CNC, Video on request

The machine is in good technical condition, after prior agreement it is possible to test it. Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360 30 Maximum punch diameter (size D) – single 81 mm Maximum punch diameter in magazine XMTE4M 4 x 31.7 mm Maximum punch diameter in magazine XMTE6M 6 x 24.0 mm Maximum punch diameter in magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in Y axis (single tool) 1250 mm Working range in X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic clamp repositioning in X axis up to 10,000 mm Max. positioning speed in Y+X axis 80 m/min. Axis acceleration 10 m/sec Number of strokes – (step 1.0mm) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Pow ...

Granulator - Shini SG-2324-CE (2 pcs.) Year of Make: 2010 Location: Lodz, Poland Description: Slow-speed granulator with gearbox, with cyclones and dedusting Power: 6 kW 2 stator blades, 6 rotor blades, the sieve - interchangeable Hopper inlet: 260x240 mm Grinding chamber opening: 240x240 mm Automatic feeding of the regrind to the big bag Soundproofed mill All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications BOTTERO 743AVL Fully Automatic Glass Cutting Table General information Make / model: Bottero 743AVL Year of construction: 2000 Type: Fully automatic cutting table Status: Used, fully functional Availability: Immediately ⚙️Technical specifications Max. glass size: 3210 × 2250 mm Cutting range: Fully automatic Cutting head: Servo-controlled, high accuracy Optimization software: Present (version depends on machine) Breaking beam: Automatic Conveyor belts: In good condition Electrical: 400V – 3Ph Construction: Robust steel frame, industrial quality Condition & maintenance Machine comes directly from glass production Regular maintenance No structural damage Immediately deployable in production Possibility of on-site inspection and testing Advantages of this model Reliable Bottero quality Low maintenance costs Ideal ...

Specifications CNC-controlled glass cutting table The Intermac Genius CT37 is a compact yet powerful CNC cutting table for flat glass , designed for precise, fast, and reliable cutting. This model is ideal for manufacturing companies seeking an efficient solution for daily cutting work with high repeatability. Specifications Model: Intermac Genius CT37 Type: CNC-controlled glass cutting table Cutting range: approx. 3700 mm Glass thickness: 3 – 19 mm Cutting head: motorized, automatic pressure regulation Optimization: integrated cutting optimization software Transport: air cushion or roller table (depending on version) Control: industrial CNC control with touchscreen Connections: 400V – 3 phases Condition of the machine The machine is functional and complete CNC control works correctly Mechanically in good condition Cutting head and drive checked Ready to use ...

Specifications The Bystronic SmartCut Float is a robust, CNC-controlled glass cutting table designed for the precise cutting of float glass in a continuous production environment. This machine is known for its stability, high cutting quality, and reliable operation in both small and large series. Key features • Suitable for float glass of various thicknesses • CNC-controlled cutting head with automatic pressure regulation • Servo drive for precise and repeatable cutting movements • Air cushion or roller transport (depending on configuration) for smooth glass transport • Automatic oil dosing for optimal cutting line quality • Integrated optimization/nesting software • Prepared for integration into a complete cutting line (loading → cutting → breaking) Technical specifications (typical for SmartCut Float) • Year of manufacture: 2003 • Cutting range: approx ...

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Tapping chuck: Quick-change tapping chuck, without collets -Recording: MK5 -Bore: Ø 62 mm -Dimensions: Ø140 x 385 mm -Weight: 15.8 kg

Clamping plate, marking and scribing plate, scribing plate, cutting table, cutting liner -Clamping plate: Cutting table -Support surface: with 5° angle divisions -Sheet thickness: 20 mm -Dimensions: 965/965/H565 mm -Weight: 168 kg

SUTEAU ANVER VFS 22x15 200t die cutting press was built in 2021 in France by SUTEAU ANVER. The machine is designed for demanding series production in the packaging, clothing and footwear industry. It enables precise cutting of a wide range of non-metallic materials from rolls or sheets, such as rubber, foam, felt or leather. The press force of 200 tonnes, combined with a number of well-proven solutions, guarantees high repeatability of the process and high cutting accuracy. The machining process is fully automatic. A movable beam lowers the head with the blanking die onto the workpiece, performing a precise cut with evenly distributed contact pressure. The cutting point is automatically set in relation to the height of the tool, while the operator can additionally correct its position with an accuracy of 0.01 mm using the control panel. The SUTEAU ANVER VFS 22x15 also enables automati ...

ALLCOMP UNICUT CC 5018 automatic cutting machine was built in 2015 in Poland by ALLCOMP POLSKA Sp. z o.o. The machine designed for the manufacture of clothing and all types of sewing products enables the cutting of single and multi-layered materials. It is distinguished by the use of state-of-the-art technology, which enables full automation of the cutting process while reducing material losses. The cutting process is performed by means of a robust oscillating knife, which is automatically sharpened during operation. This solution minimises the number of undercuts and ensures high repeatability of the cut regardless of the type of material being cut. Thanks to the high oscillation speed of the knife at 6000 cycles per minute, all operations are performed rapidly with the highest cutting quality. The UNICUT CC50 automatic cutting machine is controlled by dedicated software, which al ...

A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.

Komt er aan

- Color display - Program - Air table - Resopal side table with air left / right - Spare knife