126,699 used machines on RESALE, but how to find them? Machine Search
1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).
1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.
1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.
A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.
Right-angle gears, as good as new
Right-angle gears, as good as new
A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8631 Type: OFA 16 A Producer: TOS Created: 1976 Parameters: Machine weight: 3550 kg
Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.
Drive shaft diameter of the hollow shaft: 245mm, brake shaft dimensions: 100x190mm, drive shaft dimensions: 80x140mm, ambient temperature: -15 to 45°C, center distance: 1105mm, rated power: 275kW, weight: 52t. The gear is still unused. An on-site inspection is possible.
Key data: 630 mm, 8
A used gear pusher Lorenz S8/630 with interchangeable wheels.
Key data: 630 mm, 8
Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800
I am selling this hobbing machine. Plugged in, can be tested. Many accessories. Technical parameters: Max. wheel: 7100 mm Gear wheel width: 1500 mm Max. module: 45 Table diameter: 4000 mm Cutter diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Planer diameter: 500 mm Planer speed: 9–63 rpm Total power consumption: 47 kW Weight: 160,000 kg
I am selling this machine. Plugged in, can be tested. We can send a video of the machine via WhatsApp. The machine is well equipped Horizontal Gear Hobbing Machine Kolomna model 5B370. YOM – 1974. Max.working diameter- 500 mm; Max. module - 20; Max.workpiece lenght- 3 000mm; Very good working condition. Main technical data: Max working diameter:500 mm; Max diam. of workpiece:900 mm; Max workpiece length:3000 mm; Max modul of workpiece, mm: -by hobbing cutter 20; -by disk cutter 25; Max tilt angle:+45; Max weight of workpiece: 4000kg; Max diam. of hobbing cutters: 300mm; Max length of hobbing cutters:400 mm; Axial feeding: 0,02-575mm/min; Radial feeding: 0,36-7,1mm/min; Overall dimensions, mm: -length: 10770; -width: 4070; -height: 2580; Weight: 27100 kg.
Geared motor SWE TYPE: R43DT71D2BMG Number:1046485101003996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg20,21, Qty 1x
TYPE: R43DT71D2BMG Number:1046485101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x
TYPE: R43DT71D2BMG Number:1046691501000596 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x
TYPE: R43DT71D2 Number:10466770602002396 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 17,03
TYPE: R43DT71D2 Number:1046227901001996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg17.03
TYPE: R43DT71D2BMG Number:1046405101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x
Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422
Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.
Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.
Max. wheel diameter: 1600 mm Min. disc diameter: 800 mm Gear width: 560 mm Max. module: 16 Minimum module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine connected, can be tested. Machine equipped
MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears
CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives
Key data: 3500 mm, 20
HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...
Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg
Linear drive + planetary gearbox, stroke 880, EGC-HD-220-880-TB-0H-GK, 556825 +.., Festo, mint condition Special price The current price of a similar product is € 5381 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-HD-220-880-TB-0H-GK, 556825, current market price € 4.424 Overall dimensions: 1470x380x120mm, 70kg, Slide length 220mm, stroke 1500mm, A blue front cover and a black round rear cover will be supplied at a later date. 2) Neugart planetary gearbox, PLE120-005-SSSB3AF-E19/40/95/115/B5/M8, 42635, Festo number 552197, gear ratio 5:1, cur ...
Linear actuator + planetary gearbox, stroke 1500, EGC-120-1500-TB-KF-0H-GV, 556815 +.., Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x290x120mm, 70kg, slide 300x70mm, stroke 1500mm, A blue cap at the front and a black round cover at the rear will be supplied later 2) Neugart planetary gearbox, PLE080-005-SSSB3AE-E19/40/95/115/B5/M8, 42631, Festo number 552195, transmission ratio 5:1, 6 months warranty We give you 6 months warranty for these goods from the date of invoi ...
Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.
UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG
Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Attention: This is an original product from Neugart and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50mm, centering 180mm, pitch circle 215mm, z=4, 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our websit ...
A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...
0°→135° kantel capaciteit afstandsbediening met regelbare snelheid draaiende tafel : 360° 4 klemmen op de tafel Diameter tafel: 2000 mm MANIPULATOR: yes Capacity: 9450 kg Table dimentions: Diameter: 9450 kg - 1720 kg
Universal 750 kg MANIPULATOR: yes Capacity: 750 kg Table dimentions: dia 1000 mm Voltage: 220 volt Weight: 2600 kg
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 85 mm gear width: max. 125 mm max. module: 3 Control: ja total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. workpiece diameter... 1000mm Module ... 10- Main engine power ... 7.5kW L x W x H ... 3120 x 1870 x 2525mm Machine weight ... 10000kg
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: SIEMENS table surface area: 160 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: . mm gear width: . mm max. module: . min. module: . Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
