126,768 used machines on RESALE, but how to find them? Machine Search
Geared motor with sprocket incl. connection forward/back Motor approx. 3 KW see pictures Condition: unchecked (6) Auction-ID: A7-45761-858
Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning.
max. wheel diameter:600 mm max. module:6 weight of the machine ca.:0,9 t dimensions of the machine ca.:1,52 x 0,91 x 1,45 m
total power requirement:36 kW Available from approximately week 15 of 2026 A well-maintained gear grinding machine including: Automation Promot, year of manufacture 2012 Filtration system Hoffmann YOM 2012
max. wheel diameter:600 mm max. module:10 min. module:2 total power requirement:1,4 kW weight of the machine ca.:0,68 t dimensions of the machine ca.:1,6x0,75 m diameter of hob:15 mm gear width:140 mm
Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 135 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 340/310/H215 mm -Weight: 22.7 kg
max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
In stock on pallet, total dimensions approx. 1200x800x700 mm Auction-ID: A1-45790-573
In stock on pallet, total dimensions approx. 1200x800x700 mm Auction-ID: A1-45790-571
Consists of: Gea Autorotor, 28-stall indoor milker with a diameter of 13.20 meters, fully automatic, all stainless steel version, vacuum boiler RPS 2800, expansion tank, control system, pipe to tank approx. 15mtr. Fully working. Needs to be professionally disassembled by the buyer, Hydraulically operated carousel, including milk claws 28 pieces, Gea DemaTron 70 computer 28 pieces, Westfalen Surge operator control 200i, capacity approx. 100-110 cows per hour, dimensions in PDF included. Auction-ID: A1-40135-84
control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90% Other tools : See photo
USED GEAR MANUFACTURED BY JOHN BROWN ENGINEERING .MADE IN USA TOTAL 17 UNITS
Key data: 3500 mm
HÖFLER Porta 3500 CNC Gear Grinding Machine We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine, a large-capacity later-generation traveling gantry system with very low operating hours. Machine Overview Make/Model: HÖFLER Porta 3500 CNC Year of Manufacture: 2007 Installation Year: 2010 Total Operating Hours: approx. 6,800 hours Design: Later-generation traveling gantry system Condition: The machine is currently in still under power and requires reinstallation of a refurbished hydraulic drive motor (included) prior to recommissioning. Key Specifications (Maximum capacities as per OEM data) External Grinding Diameter: 3500 mm (137.8”) Internal Grinding Diameter: 800 mm (31.5”) Tooth Profile Height: 80 mm (3.15”) Helix Angle: ±45° Max Module: 20 (1.34 DP) Grindi ...
Geared motor with sprocket incl. connection forward/back Motor approx. 3 KW see pictures Condition: unchecked (6)
A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible.
Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible.
Key data: 3500 mm
HÖFLER Porta 3500 CNC Gear Grinding Machine We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine, a large-capacity later-generation traveling gantry system with very low operating hours. Machine Overview Make/Model: HÖFLER Porta 3500 CNC Year of Manufacture: 2007 Installation Year: 2010 Total Operating Hours: approx. 6,800 hours Design: Later-generation traveling gantry system Condition: The machine is currently in still under power and requires reinstallation of a refurbished hydraulic drive motor (included) prior to recommissioning. Key Specifications (Maximum capacities as per OEM data) External Grinding Diameter: 3500 mm (137.8”) Internal Grinding Diameter: 800 mm (31.5”) Tooth Profile Height: 80 mm (3.15”) Helix Angle: ±45° Max Module: 20 (1.34 DP) Grindi ...
Key data: 3500 mm
HÖFLER Porta 3500 CNC Gear Grinding Machine We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine, a large-capacity later-generation traveling gantry system with very low operating hours. Machine Overview Make/Model: HÖFLER Porta 3500 CNC Year of Manufacture: 2007 Installation Year: 2010 Total Operating Hours: approx. 6,800 hours Design: Later-generation traveling gantry system Condition: The machine is currently in still under power and requires reinstallation of a refurbished hydraulic drive motor (included) prior to recommissioning. Key Specifications (Maximum capacities as per OEM data) External Grinding Diameter: 3500 mm (137.8”) Internal Grinding Diameter: 800 mm (31.5”) Tooth Profile Height: 80 mm (3.15”) Helix Angle: ±45° Max Module: 20 (1.34 DP) Grindi ...
Unused industrial worm gear gearbox suitable for continuous operation under heavy loads up to 25 Nm; die-cast aluminum alloy L 2630 housing with frontal mounting via four M6 screw holes; output shaft Ø 14 mm × 18 mm with wedge slot Auction-ID: A1-45170-71
Batch of electric motors & automation Condition: unused + used Auction-ID: A1-46070-188
max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation
weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine
max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm
max. wheel diameter:130 mm gear width:170 mm max. module:3 min. module:0,5 total power requirement:48 kVA weight of the machine ca.:9 t dimensions of the machine ca.:7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:50 mm gear width:20 mm max. module:4 mm min. module:0,1 mm total power requirement:12,5 kW weight of the machine ca.:4000 kg dimensions of the machine ca.:2,2 x 2,5 x 2,3 m workpiece length - max.:300 mm
max. wheel diameter: mm gear width: mm weight of the machine ca.:7000 kg dimensions of the machine ca.:9130 x 3895 x 3450 mm max. top circle diameter:80 mm max. length of teeth cutting:170 mm Total length:240 mm taper diameter:32 mm slide travel radial ( X-axis ):100 mm slide travel tangential ( Y-axis ):160 mm axial movement Z-axis:300 mm/min workpiece spindle - bore:45 mm electr. connected load:44 kVA
max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 ° Coolant is not available. It was central and there is only a booster pump without filtering. For loading system there is a 2-axes robot with workpiece conveyor.
max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024
max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024
max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing
max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required.
max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm
max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation
max. module:7 weight of the machine ca.:5 t worm grinding diameter:280-350 mm width of grinding worm:84-104 mm min. number of teeth:6 max. number of teeth:600 max. top circle diameter:360 mm max. workpiece weight:60 kg without filter
max. wheel diameter:80/120 mm max. module:2,5 max. top circle diameter:65 mm :22 mm :140 mm :120 mm slide travel axial ( Z-axis ):320/400 mm Dimensions (L/W/H):3270 x 3240 x 2020 mm weight of the machine ca.:6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1
max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:300 cutter length max.:230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion
max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.
max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.
max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)
maximum number of results exceeded
please refine your search
250 € 
