gea grasso used for sale

Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Good

GEA Grasso reciprocating cooling compressor, type: GRASSO 612E PACKAGE, number: 05081362, year of construction: 2005, PS: 25.5 bar, TS: -10/170 °C, refrigerant: NH3, dimensions: 3200 mm x 1200 mm x 1900 mm. If desired, the concrete base is included, but this is not mandatory, dimensions concrete base: 3000 mm x 2000 mm x 450 mm. Switch cabinet is another lot number, see lot number 8.

GRASSO RC7212E Product number:M15-6041 Cooling capacity:109 kW Refrigerant:NH3 Voltage:400 Volt Motor power:75 kW Dimensions:± 5000 x 2600 x 3000 mm Weight:± 6000 kg Year:2000 Number in stock:1 piece Well maintained Grasso NH3 glycol refrigeration plant for glycol output temperatures until -45°C (109 kW). Consisting of: a Grasso RC7212E two-stage piston compressor (frequency driven), Q-plate (Vahterus) glycol/ammonia flooded evaporator, Baltimore evaporative condenser VCL048G and a control box for the whole plant. Please visit also our website: used-refrigeration

Used Grasso FKS PP 450/S water cooled chiller on Ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor - 50 Hz - 110 kW - 2970 RPM, brazed heat exchanger as evaporator, brazed heat exchanger as condenser, Grasso oil separator with a volume of 275 liter, oil cooler, oil pump and a control cabinet with a Siemens Simatic HMI controller. Capacity based on a cold water inlet/outlet of 12°C/6°C and a cooling water temperatures of 27°C/32°C. Specifications: Brand: Grasso Type: FKS PP 450/S Product type: Water cooled chiller Capacity kW: 445,0 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Capacity tons: 126,5 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Refrigerant: R717 Weight in kg: 5200 Sizes: 3400x1900x2400 mm (LxWxH) Compressors: Grasso HMR-H36S-28  ...

Manufacturer: GEA GRASSO Type: RC412E Year of Make: 1999 Refrigerant NH3 (ammonia) Displacement: 796 m³/h Speed: 1500 rpm Cooling capacity: 325 kW at -10°C/+40°C Engine: 90 kW Drive: Belt drive GEA Grasso RC 412 E NH₃ piston compressor with 90 kW motor Compact, high-performance Grasso 12 series compressor unit for industrial ammonia refrigeration systems. The RC 412 E open 4-cylinder piston compressor – in combination with the 90 kW drive motor – delivers reliable cooling capacities in the range of approx. 325 kW (under typical operating conditions such as -10 °C / +40 °C). Njbn Hoxz Hdiog N U Tswp The machine is fully functional and in very good technical condition. It is therefore ideal for installation in existing NH₃ systems or as a replacement machine.

Compressor Pack Make: Grasso Model: 411 Year 2005 Freon Previously used for a 10 ton ice machine Does not include control panel

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

- Toothed gear MWM 12302297 Original - Suitable for several motors - Please note! Price per piece! - 12302297 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Toothed gear MWM 12307524 - Please note! Price per piece! - 12307524 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.

TO WHOM IT MAY CONCERN ;

Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314

Manifold GEA TUCHENHAGEN Mixproof-valves - Flushing - Balanced Valve top type: TM15N2B0M/66 DN25 NL = 8x DN25 KWIK = 3x DN 65 = 2x DN 80 = 27x Please contact u for more information

Pressure filler Vipoll GEA type: Visipraktik VKR-ES-DN 12-3 K capacity: up to 3.000 bph double pre-evacuation working hours: less than 1.000 for 330 ml bottles bottle diameter: 50 - 105 mm bottle height: 125 - 370 mm

COMIFLEX C.I.GEARLESS VALE 1208, Fully Automatic, suitable for PE, PP, OPP, PET, Paper, Ink Pump – Phonematic with Autowash, FIFE Camera System, Material width - 1.280 mm, Print width - 1.200 mm, Min/Max repeat length - 380/840 mm, Machine speed - 300m/min., 8 Colours, N.14 Anilox cylinders, n.216 sleeves, n.2 web guides, n.2 stretching rollers, Face Length – 1.260mm, Engrave Length – 1.240mm, OD – 171.88 mm, ID – 149.722 mm, 8 sleeves:, ID – 114.708 mm, Face Length – 1210 mm, Standard Turret unwinder; non-stop Max roll diam.: 800 mm Expanding shafts: 3”, Double unwinding shaft, dancing rollers. Max roll diam.: 800 mm Expanding shafts: 3”, Electrical drying system, n.8 self washing pneumatic pumps, The Printer is in immaculate showroom condition and has been serviced only by the manufacturer., Full service history available., availability: immediate, working width: 1200 ...

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Total weight: 1000 kg

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.

Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.

Key data: 600 mm, 20

The Mahr Primar GMX 600 gear measuring machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of measuring gears, camshafts, rotationally symmetrical components, tools. . Technical data Diameter: 600 mm Module: 20 mm Axial travel: 700 mm Dimensions: 2,300 x 2,400 x 1,800 m Machine weight: approx. 5,000 kg Information and data are non-binding, subject to prior sale Special features: Can be delivered as a used machine or as a retrofit with a new control system based on Siemens and measurement software.

GEA Refrigeration Germany GmbH screw cooling compressor, type: Grasso MR-M2655S-28, serial number: M1949, year of construction: 2014, geometric volume: 3912 CM³/rot, flow rate: 845 m³/h, allowable pressure: 28 bar, max speed: 4500 rpm, refrigerant: NH3 R717, empty weight: 3090 kg, with WEG motor, power: 160 kW, dimensions cooling compressor: 3300 mm x 1300 mm x 2300 mm, dimensions switch cabinet: 2400 mm x 600 mm x 2200 mm.

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Centrimax provides used, but reconditioned centrifugal decanters (by Flottweg also as full coat screw centrifuge GEA Westfalia Separator as centrifugal decanter - or by Alfa Laval also de decanter centrifuge or decanter centrifuge known as) makes Flottweg, GEA Westfalia Separator, Alfa Laval, Sharples, Andritz etc. Thanks to a comprehensive overhaul and delivery with a mechanical warranty, you meet the highest standards of quality from supplied decanter (full coat screw centrifuge, Zentrifugaldekanter). The new SPS controls supplied with the decanter enable easy integration into the existing production process and lead to a new machine character. Centrimax provides almost all de decanter types available on the market:

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

GEA Ahlborn plate heaters used

Dimensions: L 1410 mm x W 900 mm x H 1310 mm.

6-color R25476/17 ALLIED GEAR label flexo printing machine model: Flexomaster age: 1995 available: immediately 6 colour 6 anilox rolls paper cutter laminator transporter power unit UV dryer Video mounting plate (JM Heaford) Still in operation: Yes Available: nach Absprache

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

power is 620kW @ 1800 arpm

2.5:1

Used decanter centrifuge HYSEP type MD43C with carbon steel bowl and screw. Internal surface of bowl and screw flinge are lined with wolfram-carbide. Bowl has a main drive 11/12.5 kW, 1455/1755 rpm , 50/60 hz. Screw is driven by hydraulic motor with power 5.5 kW. Working rotation speed of bowl 2800 rpm. Maximal sludge density 1.2 kg/m3, working temperature up to 80C. Machine is mounted on integrated frame and is equipped with feeding pump, polimer dosing device and control panel. Bowl cover, discharges and drive covers are designed in stainless steel. Technical documentation included.

Centrimax provides used and reconditioned separators for the beverage industry: Beer separators Dairy separators Separators for the juice industry Separators for coffee, tea, and soy

Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of construction: 2001 Drum speed: 3,300 RPM Starting up: 2004 Usage area: In the production of base oils for the removal of solid particles. Decanter was taken out of service after a production changeover in 2004. Therefore it is fully functional and in very good condition. There are control cabinets including all wiring diagrams, as well as complete documentation! Cabinets have a frequency converter to regulate the speed of the drum. In very good condition!

GEA Tuchenhagen acid tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200

Centrimax - Winkelhorst separation technology GmbH supplies used, but reconditioned centrifugal separators of makes GEA Westfalia Separator and Alfa Laval for the centrifugal solid liquid separation. The separators are a comprehensive overhaul and then delivered with a mechanical warranty. Furthermore, the separators with new plc are equipped with whose help the separators can be integrated easily into the existing production process. All marketed separator types (E.g. automatic drum separators) belong to the program from Centrimax.

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

GEA Fuellpack vacuum water degassing system / degassing system. Residual oxygen

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

FOR SALE ... WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT TURKEY. TO WHOM IT MAY CONCERN WE VE WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT OUR STOCK . PLS FIND DETAILS ON BELOW TYPE BILGE MASTER 3000 SERIAL NO 9018-317 2007 YOB CERTICATE NO 330/241 WHEEL MARKET NO 0736 Separator TYPE WSD18-01-037 SER NO 9018-317 2007 YOB SYSTEM HAS COMPLETE OIL MONITOR PANEL / BILGE ALARM / CONDENCER ETC ETC BILGE MASTER 3000 READY TO TRANSPORT AT IZMIR TURKEY. IF YOU HAVE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US.. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW