gea compressor used for sale

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (17 kW), motor cover, base plate, feet and inlet/outlet pipes with flow indicator., Additional features:, Excluding:, - Water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 7.000 liter per hour, Bowl speed: 6.500 rpm, Motor: 17 kW - 380 V - 50 Hz - 1.445 rpm - 34 A , Dimensions: 170 x 120 x 175 cm, Weight: 1.300 kg

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009, The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure., With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work., Key Features, • Model: GEA Niro Soavi NS2002H, • Year of manufacture: 2009, • Capacity: up to 30 L/h (product and pressure dependent), • Working pressure: up to 60 MPa (600 bar), • Laboratory / bench‑scale design – compact and easy to install in R&D labs, • Stainless steel product contact parts for hygiene and corrosion resistance, � ...

Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing  ...

The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. Technical Specifications Type: M10-MBASE Heat transfer area: 2.6 m? Plate material: Stainless steel Alloy 316, thickness 0.50 mm Gasket material: NBRFF Clip-On (Nitrile rubber) Plate pack thickness: 63 mm Total weight: 232 kg Total volume: 13 liters Dimensions: Height 672 mm, width 618 mm, depth 530 mm Connection standard: DIN NW100 Bolts: M20 Expandable: up to 17 additional plates Operating Data Design pressure: 10 bar Test pressure: 14.3 bar Design temperature: up to 120 ?C Minimum temperature: 0 ?C Typical flow examples (according to datasheet): Wine: 2,000 L/h (heating 12 ? 17 ?C, ?p = 47 kPa) Hot water: 2,000 L/h (cooling 30 ? 24 ?C, ?p = 22 kPa) Fruit juice: 240 L/h (heati ...

Height=1.79 m, Overall length= 2.96 m, Overall width= 3.35 m, Net weight= 7000 kg,

Used Premix Procomac Starmix - 8000 BPHTechnical Specifications & Performance DataThe Procomac Premix Starmix 15000 is a robust premixing unit engineered for beverage production environments within a used bottling line or as part of a second hand industrial packaging setup. Designed to prepare still and carbonated beverages prior to filling, it delivers consistent mixing quality and stable carbonation control for water and soft drink applications. Built for reliability, this unit integrates seamlessly into modern bottling equipment and packaging machinery workflows.Manufacturer: ProcomacModel: Starmix 15000Year of manufacture: 1993Maximum output: 8000 (dependent on product and configuration)Containers: Designed for PET and Glass bottle handlingProcessed products: Still water, sparkling water, soft drinksWorking pressure: 6 barDimensions (L x W x H): 2400 x 4100 x 4000 mmWeight: 2000 kgEl ...

Used Sidel Aseptic filling line 48000 BPH - year 2020Technical Specifications & Performance DataThis used bottling line is a Sidel PET aseptic Blow–Fill–Cap combi configuration engineered for high-speed beverage production. Designed for dry aseptic applications, it delivers consistent performance for sensitive products while maintaining hygienic integrity throughout the process.Manufacturer: SidelLine type: PET aseptic Blow–Fill–Cap combiProduction speed: 48,000 bphCurrent product: PET bottled water, milkApplication: Dry aseptic; suitable for milk, juice and waterAvailable bottle volume: 230 ml (0.23 L)Main equipment year: 2020 (blowing, filling, bottle dryer, etc.)Blower model: Matrix XS P50 (SBO 22/28/26 Matrix XS P50)Filler/Combi model: FMa-COMBI CAPDIS-24kBottle dryer: 5 sets, includes conveyorSteam generator: Spirax Sarco, 200 kgAir compressor: AF L5S, 35 bar, 22 ...

Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam:  ...

General SKU312P726 MakeGEA Tuchenhagen Dairy Sysytems GmbH TypeC15 No.C15/700096 Year of construction2004 LocationBarneveld Pressure Working pressure shell8 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface0.6 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface0.6 M2 Tube capacity2,5 Ltr Number of tubes:84 Tube diameterdia. 6mm Tube length440 mm Max. temperature-10/100 degr.C Shell capacity2,6 ltr Shell diameter110 mm Shell length370mm Max. temperature-10/180 degr.C. Shell connections1x dia 27 mm 1x dia 45 mm Cover connectionsdia 55mm Information Floorspace1,6x0,6 M Total height0,2 M Weight60 KgTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberShell and tube heat exchangersBiotechnologyAgr ...

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDecantersDiscountGEA WestfaliaCentrifuges > DecantersDiscountBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 ...

Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

This flash pasteurization system is used to stabilize beverage quality through gentle pasteurization. The product is heated to pasteurization temperature via a plate heat exchanger for a defined period of time and then cooled in a controlled manner. The system consists of: - Tube heat exchanger with hot water buffer tank for supplying hot water -Plate heat exchanger for flash pasteurization of the product This combination ensures reliable, uniform heating to guarantee long-term product quality. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: In-line pasteurisation plant for beer, built between 1987 and 1999, Capacity: 35000 l/h, Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement, Features: 1 x plate heat exchanger, 1 x tube heat exchanger, 1 x hot water pu ...

Single-stage homogeniser, used for hop suspensions with a particle size of 1 µm. Integration into a higher-level control system is possible via signal exchange. The motor was controlled via an external FI., Additional title: high pressure homogenizing, Capacity range approx.: 1800 l/h, Pressure: 250 bar, Cellular particle size: 1 μm cellular particle, Length: ca. 2,2 m, Width: ca. 2,5 m, Height: ca. 1,9 m, Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter., Features: CIP-able, SIP-able

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

3 vertical stainless steel tanks, each capable of being heated with hot water. Previously used as CIP tanks (2 x alkali tanks and 1 x acid tank), Additional title: heatable, vertical stainless steel vessel, Volume appr.: 1000 l, Width: 1 m, Height: 2 m, Weight: 250 kg, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with square tubular feet on spherical caps, Features: Top lid, temperature measurement, equipment for heating with hot water

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

Machine name: Used decanters Manufacturer: GEA Westfalia Type: SD0815 Year of Make: 2000 Max. drum speed: 3,000 RPM Inner diameter drum: 500 / 245 mm Njwjy Ui A Rs Rxtpqoct Inner drum length: 1,466 mm Material: Stainless Steel Dimensions: L 3,045 x W 1,100 x H 1,695 mm Curb weight: 2800 kg Tech. Documentation: Yes Accessories: A control cabinet Note: The used industrial decanter was inspected annually, the drum was pulled every two years. Condition: Used Price: On request

Separator Bactofuge GEA Westfalia CSI 230 1734-326 Working Hours 14,000 Year of Construction 2014 Still installed in the factory, Schedulued for Dismantling June 2026 Includes Control Panel, Tools, Technical Documentations and Instruction Manuals Requires Regular Maintenance Due to 9 Years of standing out of operations, as on the pictures After technical maintenance it is destined to work for you another 30-40 years We deliver worldwide or Collection by your forwarding company after full payment Commissioning in your location possible after agreement at extra cost

Excellent Complete Myford Super 7 Metric Lathe Gearbox & Power Cross The lathe also comes with various extras which i will list out below. I may miss some but will do my best 5" 4 jaw self centering chuck (Pratt Burnerd) 3" 4 jaw self centering chuck (Pratt Burnerd) 6" 4 jaw independant chuck (Pratt Burnerd) 3" 3 jaw Self centering chuck (Pratt Burnerd) 4" 3 jaw self centering chuck (Pratt Burnerd) Many of the chucks got internal and external jaws 6 jaw swiss chuck with internal and external jaws Albrecht 0-3mm chuck with morse taper no1 Albrecht 0-6.5mm chuck with morse taper no1 Jacobs 0-3/8" chuck with morse taper no1 9" face plate 7" face plate x 2 6" face plate Jacobs 1/2" tailstock chuck Jacobs 3/8" tailstock chuck Jacobs 3/8" tailsock chuck Jacobs 1/4" tailstock chuck German 1/4" tailstock chuck Myford vertical slide swivel type with dials fitted Myford  ...

Interchangeable gears/gears This 32-piece steel interchangeable wheel set consists of: Gears with the number of teeth from 20 - 149 Auction-ID: A1-47017-28

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

Amonyak refrigeration plant,from a meat processing plant. The plant is made of 3stk. Compressor Sabroe, Compressor 1. SABROE Type: SMC104L-HP,276m3/h,1465rpm,R717,Y.O.M.1996. Electric motor SCHORCH Type: KN7225M-BB01F-Z,55kW. Compressor 2and3. SABROE Type: CMO28,190m3/h,1460rpm,R717,Y.M.1996. MOTOR SCHORCH Type: KN7200M-BB01F-Z,37kW. The plant is in a very good condition,see pictures. Several pictures and info on request.

Compressor Bitzer 6H-25.2Y-40P,Used for freezing or plus-cooling

Compressor make BITZER Type 4H-15.2Y, 73.7 m3/h conveying volume For more information call +43 0664/1838175 or by emailing info@frigocom.net

Make: Danfoss Type: SZ175S4RC Performer 3 pieces New Vacuum: - Pressure: 25bar - Temperature max: 63C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 31.9bar - Temperature max: 65C - Temperature min.: -35C - Volume: 2 litres

Verbundanlagen Bitzer with original capacitors Deep-cave / Normal kuhlung -3x compressor Bitzer HSK6461-60-40P -KaeltePower: 177 kW at -10oC/40oC R134a 292.8 kW at -10oC/40oC R407C -Volume: 3 x 165 m3/h -Pieces in stock: 2 pieces -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

compressor compressor Copeland Stream, model

A complete unit is offered.

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

Operation unknown Auction-ID: A1-40112-146

1 x Atlas Copco compressor GA 18 1 x Atlas Copco Compressor GX 11 FF 1 x compressed air tank 2000 L with condesate trap 1 x Refrigeration Dryer FD 120 1-2 oil-water separators

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.