gea ahlborn used for sale

FOUR(4) PCS - MARINE GEARBOX TWIN DISC MG6848SC 2.931:1 MARINE GEARBOX TWIN DISC MG6848SC OVERHAULED COMPLETE WITH NEW HYDRAULIC HOSES AND CONNECTIONS

REINTJES MARINE GEARBOX WAF 643 - REDUCTION 3.938:1 735 KW 1450 RPM

TWIN DISC MARINE GEARBOX - MG 5050 - 2.5:1

2 PCS - TWIN DISC MARINE GEARBOX - MG 5202 DC - 5.04:1 - COMPLETE WITH NEW COOLERS AND HYDRAULIC HOSES ALSO AVAILABLE FOR SALE PER UNIT

USED MASSON MARINE GEARBOX

REINTJES MARINE GEARBOX - WAV 550 B - 5.158:1

REINTJES MARINE GEARBOX - WAV 500

2 PCS - ZF MARINE GEARBOX IRM 350 1.653:1

ZF MARINE GEARBOX ZFW 4610 5.037:1

TWIN DISC MARINE GEARBOX MG 516 RATIO 6:1 RUNNING TASKS OUT IN GOOD CONDITION

SEW Eurodrive Motor SEW RF 47 DT90L4/BMG/MM15

SOLD MARINE GEARBOX WITH PTO GUASCOR R360 4,4:1 SERIAL NUMBER 113058 MANUFACTURING DATE 13-11-2009

Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

Two Gear Motors SEW Eurodrive, Model: V112, 3 Motor, S1-100% ED, SN: E189357 Device in good condition. Please check manufacturer site: Kanitech Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commer ...

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

P1251

heavy gear, angular gear -Translation: 20: 1 -Drive shaft: 35 mm -Output shaft: 2x 22 mm -Weight: 27 kg

Gear, stin gear -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg -Translation: 1: 14

Length approx. 4.5 m Diameter approx. 200 mm 2.2 kW drive

Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

Angle geared motor Manufacturer: SEW-Eurodrive Model: W30 DRS71M4/TH Quantity: 2 pcs. Built: 2017 Voltage: 230/400 V Current: 2.70/1.55 A Protection: IP55 Efficiency class: IE1 Standard Efficiency Speed: 1360/207 rpm Frequency: 50 Hz Power: 0.55 kW

SEW Eurodrive SA 77 R 37 Geared Motor Electric Motor Rotary Tom Motor Angular Gear Motor unused ( as good as new ) Type SA 77 R 37 DT 90S4 No 64.1362611.301.0001.1040 -Speed 1400 / 4.3 ipm -Power 1.1 Kw -Design angle -Protection class IP54 -Weight piece 74.8 kg

Gearboxes, pinion gears, angular gears, transmission gears -Drive shaft: Ø 20 mm -Dimensions: 200/180/H200 mm -Weight: 11 kg -Translation: 1:13.8

Gear, stin gear -Drive shaft: Ø 19 mm -Drive shaft: Ø 19 mm hollow shaft -Dimensions: 260/240/H180 mm -Weight: 12 kg -Translation: 1:2.9

Gear, stin gear -Drive shaft: Ø 38 mm -Drive shaft: Ø 28 mm -Dimensions: 330/280/H280 mm -Weight: 30 kg -Translation: 1:20

Gear, stin gear -Drive shaft: Ø 25 mm hollow shaft -Hollow shaft: Ø 24 mm -Dimensions: 220/190/H185 mm -Weight: 14 kg -Translation: 1:20

Gear motor 220 volts, angular gear, electric motor -Voltage: 220V -Power: 1100 W 5.0 A. -Speed: 12 rpm -right/left run -Control switch -Dimensions: 650/220/H230 mm -Weight: 13 kg

Gear, cogs, spur gear -Gear: helical, 59 teeth -Diameter: Ø 344 mm -Tooth width: 80 mm -Dimensions: see photos -Total dimensions: Ø 344 x 467 mm -Weight: 78 kg

Gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mount: inside Ø 42 mm -Measurements: see photos -Dimensions: Ø 80 x 60 mm -Weight: 0.9 kg

Gear, gears, spur gear -Gear: 35 teeth -Shaft mount: inside Ø 60 mm -Measurements: see drawing in the photos -Dimensions: Ø 368 x 78 mm -Weight: 16 kg

Gear, stin gear, angular gear -Translation: 1: 7 -Shaft dimensions: see photo -Construction: B3 -Dimensions: 120/80/H120 mm -Weight: 2.1 kg

Gearboxes, pinion gears, angular gears, transmission gears -Translation: 1: 11.21 -Drive shaft: Ø 16 x 45 mm -Output shaft: Ø 25 x 50 mm -Dimensions: 315/145/H155 mm -Weight: 9.7 kg

heavy gear, angular gear -Type: E 880 G -Shaft: Ø 20 mm -Length: 50 mm -Flange: Ø 125 mm -Dimensions: 260/280/H160 mm -Weight: 16 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for: pedestrian stacker -Wheel: 220 x 70 mm -Dimensions: 220/250/H640 mm -Weight: 54 kg

Manufacturer Niles Model ZSTZ 1250 Year 1986 Maximum wheel diameter : 1250 mm Module + : 30

Manufacturer Gleason Model Pfauter P 200 G Year 1999 Machine is in good condition

Reishauer AZA Gear Grinder The machine is in very good condition with complete equipment. It is connected to electricity and can be seen in operation. Complete documentation.

For sale we offer used SEW DC geared motors in various line classes. Prices per kg. , depending on the quantity and condition of the engines. Sale to dealers and traders "The sale is made to the exclusion of any liability for material defects." 'Liability for damages for injury to health, body or life and grossly negligent and/or intentional breaches of our obligations as sellers remain unaffected." in accordance with our Terms and Conditions The full terms and conditions can be viewed at this link: abc://eurotechnik-dittrich.de/agb.html

Pipe screw conveyor screw used inclined conveyors Changes can be made by our own special machine construction according to your wishes. Pipe diameter approx. 380 mm Pipe length approx. 6000 mm Inlet/outlet-diameter approx. 350 mm Screw and tube made of stainless steel Gearmotor Sew 1.1kW 10 rpm 380 V Total dimensions approx. 8000 x 600 x 1300 mm

Feed gearbox LENZE GKS 07-3N i=11,378 / 123 min-1

Feed gearbox VOGEL Spare parts for planing machines from a skilled person

suitable for dimter Kappsaege coaxial planet gearbox

Actuator Pradler gear technology Lifting drive for belt adjustment / turnout Drive is created / built on customer request Stroke length / lifting force / supply voltage / 24 V - 440 V 2AC 3 AC 50/60Hz +DC

- Toothed gear MWM 12302297 Original - Suitable for several motors - Please note! Price per piece! - 12302297 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Toothed gear MWM 12307524 - Please note! Price per piece! - 12307524 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

20167 ZF BW 251 - 4.792:1 A 0.346 KW/RPM Brand Gearbox ZF Model Gearbox BW 251A Ratio 4.792:1 A Power 0.346 KW/RPM RPM 1800 RPM Serial Number 3815 General condition Taken out running condition With Flexible Coupling With SAE Housing With Controls Mechanical With Mounting Brackets SAE 0 Weight (kg) 880 Dimensions (cm) 100 x 105 x110

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.