gea ahlborn used for sale

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

GEA Ahlborn plate heaters used

Used Gea Ahlborn VT 20 Locin flow pateuriser. Capacity 70 hL/h, full control panel, 16 Bar, 100 C. Lenght 330 cm, width 230 cm, weight 3000 kg. New 1991 r. CIP, equalizing tank. The largest product feeding pump according to my estimation, has a capacity of 50 000 liters / h (feed 2 ½ inch and 2-inch outlet) The pump does not have a nameplate. Its engine has an attached plate: 11-12,6 kW motor and connections that I mentioned above helped me specify the parameters of the pump. The pump is however stifled by giving large pressure and lower productivity. Supply systems for the beer and from there on to the pasteurizer have a diameter of DN40. The second pump section supports pasteurization (between the heat exchanger and a heating section in a large plate heat exchanger) is pump Fristam FP 722/145 A with an engine power of 1.5 kW. It should have a capacity of approx. 15 ...

Continuous Butter Making Machine (CBM) which has a production capacity of ± 1.000 kg of sweet, sour, or cultured butter per hour (salted or unsalted). It operates with an input of approximately 2.000 liters of cultured and/or sweet cream per hour (35–42% fat, pH ~4.8, inlet temperature 8–13 °C). The unit is fully electrically driven. All product-contact parts and the frame constructed from stainless steel. It is CIP-cleanable for hygienic operation., The system is supplied with two separate stainless steel skids., Process skid, including:, - Balance tank, - Feed pump, - Vacuum system, - Ice water system, - Flow transmitter at cream inlet (ltr/h), - Buttermilk and CIP collecting tank, - Buttermilk/CIP pump, - Buttermilk plate cooler, - Interconnecting piping and manual valves, - Stainless steel control panel with Siemens S7 PLC, Exor touchscreen HMI, and Danfoss frequency converters ...

Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec

Second-Hand Butter Production and Packaging Machinery Complete butter production and packaging equipment suitable for industrial dairy processing. The system includes a continuous butter machine, forming and filling equipment, and packaging units, providing an efficient solution for butter production and portion packaging. General Information - Year of Manufacturing: 2008 - Condition: Good used condition - Continuous Butter Machine - High-performance continuous butter production unit designed for reliable processing in dairy plants. - Manufacturer: AHLBORN - Model: 311/1000 - Capacity: 1000 kg/hr Maintenance History - Gear system completely revised in 2018 – hardened gears installed - Exit stars completely replaced in 2020 Output Configuration - Exit tube: 250 g - Exit tube: 25 blocks Rotary Forming and Filling Machine - Automated system for butter portion fo ...

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 60,000,Bottom floor: flat bottom with slope,Top floor: conical bottom,Design: upright,Insulation: available,Diameter inside: 3,500,Diameter outside: 3,610,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyes,Outlet: present,Outlet : 80,Remarks: Container feet are spacers for the substructure/foundation. Inside small repair points,last use: foodstuffs,material in contact with the product: V2A 1.4301

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 110,000,Lower floor: flat floor with slope,Design: upright,Standing form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 3,484,Cylindrical height: 13,330,Total height: 14,550,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Ladder included,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer:

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

- Toothed gear MWM 12302297 Original - Suitable for several motors - Please note! Price per piece! - 12302297 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Toothed gear MWM 12307524 - Please note! Price per piece! - 12307524 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.

TO WHOM IT MAY CONCERN ;

Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314

Manifold GEA TUCHENHAGEN Mixproof-valves - Flushing - Balanced Valve top type: TM15N2B0M/66 DN25 NL = 8x DN25 KWIK = 3x DN 65 = 2x DN 80 = 27x Please contact u for more information

Pressure filler Vipoll GEA type: Visipraktik VKR-ES-DN 12-3 K capacity: up to 3.000 bph double pre-evacuation working hours: less than 1.000 for 330 ml bottles bottle diameter: 50 - 105 mm bottle height: 125 - 370 mm

COMIFLEX C.I.GEARLESS VALE 1208, Fully Automatic, suitable for PE, PP, OPP, PET, Paper, Ink Pump – Phonematic with Autowash, FIFE Camera System, Material width - 1.280 mm, Print width - 1.200 mm, Min/Max repeat length - 380/840 mm, Machine speed - 300m/min., 8 Colours, N.14 Anilox cylinders, n.216 sleeves, n.2 web guides, n.2 stretching rollers, Face Length – 1.260mm, Engrave Length – 1.240mm, OD – 171.88 mm, ID – 149.722 mm, 8 sleeves:, ID – 114.708 mm, Face Length – 1210 mm, Standard Turret unwinder; non-stop Max roll diam.: 800 mm Expanding shafts: 3”, Double unwinding shaft, dancing rollers. Max roll diam.: 800 mm Expanding shafts: 3”, Electrical drying system, n.8 self washing pneumatic pumps, The Printer is in immaculate showroom condition and has been serviced only by the manufacturer., Full service history available., availability: immediate, working width: 1200 ...

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Total weight: 1000 kg

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.

Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.

Key data: 600 mm, 20

The Mahr Primar GMX 600 gear measuring machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of measuring gears, camshafts, rotationally symmetrical components, tools. . Technical data Diameter: 600 mm Module: 20 mm Axial travel: 700 mm Dimensions: 2,300 x 2,400 x 1,800 m Machine weight: approx. 5,000 kg Information and data are non-binding, subject to prior sale Special features: Can be delivered as a used machine or as a retrofit with a new control system based on Siemens and measurement software.

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Centrimax provides used, but reconditioned centrifugal decanters (by Flottweg also as full coat screw centrifuge GEA Westfalia Separator as centrifugal decanter - or by Alfa Laval also de decanter centrifuge or decanter centrifuge known as) makes Flottweg, GEA Westfalia Separator, Alfa Laval, Sharples, Andritz etc. Thanks to a comprehensive overhaul and delivery with a mechanical warranty, you meet the highest standards of quality from supplied decanter (full coat screw centrifuge, Zentrifugaldekanter). The new SPS controls supplied with the decanter enable easy integration into the existing production process and lead to a new machine character. Centrimax provides almost all de decanter types available on the market:

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Dimensions: L 1410 mm x W 900 mm x H 1310 mm.

6-color R25476/17 ALLIED GEAR label flexo printing machine model: Flexomaster age: 1995 available: immediately 6 colour 6 anilox rolls paper cutter laminator transporter power unit UV dryer Video mounting plate (JM Heaford) Still in operation: Yes Available: nach Absprache

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

power is 620kW @ 1800 arpm

2.5:1

Used decanter centrifuge HYSEP type MD43C with carbon steel bowl and screw. Internal surface of bowl and screw flinge are lined with wolfram-carbide. Bowl has a main drive 11/12.5 kW, 1455/1755 rpm , 50/60 hz. Screw is driven by hydraulic motor with power 5.5 kW. Working rotation speed of bowl 2800 rpm. Maximal sludge density 1.2 kg/m3, working temperature up to 80C. Machine is mounted on integrated frame and is equipped with feeding pump, polimer dosing device and control panel. Bowl cover, discharges and drive covers are designed in stainless steel. Technical documentation included.

Centrimax provides used and reconditioned separators for the beverage industry: Beer separators Dairy separators Separators for the juice industry Separators for coffee, tea, and soy

Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of construction: 2001 Drum speed: 3,300 RPM Starting up: 2004 Usage area: In the production of base oils for the removal of solid particles. Decanter was taken out of service after a production changeover in 2004. Therefore it is fully functional and in very good condition. There are control cabinets including all wiring diagrams, as well as complete documentation! Cabinets have a frequency converter to regulate the speed of the drum. In very good condition!

GEA Tuchenhagen acid tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200

Centrimax - Winkelhorst separation technology GmbH supplies used, but reconditioned centrifugal separators of makes GEA Westfalia Separator and Alfa Laval for the centrifugal solid liquid separation. The separators are a comprehensive overhaul and then delivered with a mechanical warranty. Furthermore, the separators with new plc are equipped with whose help the separators can be integrated easily into the existing production process. All marketed separator types (E.g. automatic drum separators) belong to the program from Centrimax.

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

GEA Fuellpack vacuum water degassing system / degassing system. Residual oxygen

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW